2 embroidery Tajima machines 12/18 heads

Tajima DC1212 & DC1218

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Lredpfortnccox Amzsu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4C0524, Lector Vectra 500 2004 . No.:4C0524 Lsdpfxsw Am S So Amzsru Reliable, very good machine! width: 180cm length: 210cm Cnc cutting machine

Condition: good (used), Year of construction: 2009, We sell a 12 heads flat embroidery machine Tajima TFSN-912 Field 680x360 9 needles 12 heads Touchscreen control panem Check by technician Lsdpfxoyc El Ns Amzoru Dimensions : 5500x1800mm heigth 1630mm Weigth : 1786kg

Condition: used, Year of construction: 1995, functionality: limited functionality, total width: 1,637 mm, total length: 5,805 mm, For sale: a professional, industrial 12-head computerized embroidery machine from the renowned Japanese brand Tajima, model TMFD-C912. The machine is in continuous operation, fully functional, and ready for production in a garment factory or sewing workshop. We have owned and operated the machine for the past 2 years. Throughout this period, it has been regularly serviced and well-maintained, ensuring stable and reliable performance. Due to transportation and relocation, it may require standard calibration/adjustment upon installation at the new owner's site. Technical Specifications (from the nameplate): Manufacturer: Tokai Industrial Sewing Machine Co., Ltd. (Japan) Model: TMFD-C912 - S (450 x 360) + Number of Heads: 12 Number of Needles (Colors) per Head: 9 Serial Number (MFG. No.): 1112 Date of Manufacture: July 1995 (JUL. 1995) Dimensions & Weight: Lodpozikn Iofx Amzeru Length (L): 5805 mm (approx. 5.8 m) Height (H): 1780 mm (approx. 1.78 m) Width (W): 1637 mm (approx. 1.64 m) Net Weight: 2275 kg Electrical Requirements: Power Supply: 3-phase (380 V), 50 Hz Power Output: 1.1 kW / 2.4 KVA Technical & Visual Condition: Condition: Used, very good. The machine is regularly cleaned and lubricated. Functionality: 100% mechanically and electronically operational. As standard for multi-head equipment after transport, a general inspection and fine-tuning by a technician is recommended. Complete thread stands above each head. Original, clear Tajima control panel with diskette drive/connector interface. This machine is perfect for high-volume production of promotional clothing, patches, embroidery on panels, and finished products. Tajima machines from the 90s are famous for their extreme durability, heavy-duty reliability ("built like a tank"), and very high stitch precision compared to modern alternatives.

Condition: ready for operation (used), We have 2 ZSK flat embroidery machines to sell 1 X 2507 (25 heads and 7 colors) 1 MCF 1011 400 (10 heads and 11 colors) Lodpeztma Iefx Amzsru Embroidery field 40x50cm per head Sold in Bulk only, pick mandatory before September 2026 Price for both machines 6000€ Very clean and maintained machines, transport and loading not included (but we can provide quotations if needed)

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Ledpjy Avg Eefx Amzjru Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: excellent (used), industrial automated cutter Powered by Gemini in very good condition. 2pcs on stock . Lrsdpfx Amspxnyyozju

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, type of input current: AC, total width: 3,000 mm, total length: 4,500 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 150 mm, working width: 2,000 mm, total height: 3,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 3,000 mm, compressed air connection: 3 bar, High-Precision CNC Cutting Machine for Carbon Fiber Prepreg & Composite Materials Professional CNC cutting plotter designed for precision cutting of carbon prepreg, fiberglass, technical textiles, foams, leather, PVC, and other advanced composite materials. Ideal for aerospace, automotive, marine, motorsport, and composite manufacturing applications. The machine delivers extremely accurate and repeatable cuts while significantly reducing material waste and production time compared to manual cutting. Equipped with vacuum table technology for secure material fixation and clean, stable processing of delicate prepreg materials. Suitable for both prototyping and serial production. Key advantages: • High cutting precision and repeatability • Excellent for carbon fiber prepreg cutting • Fast and efficient production workflow • Clean edge quality without fraying or burning • Reduced material waste • Vacuum working table for stable material holding • Industrial CNC control system • Vacuum pump included • Suitable for complex geometries and nested parts • Reliable operation for composite manufacturing environments Applications: • Carbon fiber prepreg cutting • Fiberglass and aramid fabrics • Composite part production • Automotive and motorsport components • Marine composite manufacturing • Aerospace applications • Technical textile cutting • Prototype and serial production The machine is in very good working condition and can be tested on-site. Vacuum pump is included in the sale. For additional information, technical details, videos, or pricing, please contact us. Lodpfx Ajy Tvatjmzeru

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Lredpfx Aez D Nkbsmzou

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Ljdpsz Atvujfx Amzoru Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.