Universal Cylindrical Grinding Machine
TOS KAMENICEK BUC63A x 3000

Name: TOS KAMENICEK BUC63A x 3000
Brand: TOS KAMENICEK
Availability: InStock

Year of construction

1984

Condition

Used

Location

Sheffield

Universal Cylindrical Grinding Machine TOS KAMENICEK BUC63A x 3000

Show map

Machine data

Machine type:: Universal Cylindrical Grinding Machine

Manufacturer:: TOS KAMENICEK

Model:: BUC63A x 3000

Year of construction:: 1984

Condition:: good (used)

Price & Location

Location:: Albion Works, Attercliffe Road, S4 7WW Sheffield, United Kingdom

Call

Details about the offer

Listing ID:: A733-6619

Update:: 10.10.2024

Description

Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984.

MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED.

SPECIFICATION

Max Swing 630 mm
Distance between centres 3000 mm
Workhead swivel – towards wheelhead only 90 deg. mm
Work spindle bored taper No. 6 M.T.
Length of stroke of tailstock barrel 70 mm
Tailstock barrel taper No. 6 M.T.
Spindle nose clamping Din 55021
Swivelling of wheelhead + 30 deg – 10 deg
Length of adjustment by re-circulating ball screw 290 mm
Additional length of adjustment 250 mm
Length of rapid feed 90 mm
Length of infeed setting per each rev. of handwheel, measured on work diameter
0.5 mm

Grinding wheel dia. X width X bore 750 x 80 x 305 mm
Min. dia. of worn grinding wheel 570 mm
Max. face width of grinding wheel 125 mm
Rate of table traverse – steplessly variable 0.5-0.6 m/min
Table traverse per 1 rev of handwheel 8 mm
Swivelling of table +/- 5 deg.
Max. permissible weight of work between centres 2500 kg
Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck)
150 kg
Wheel spindle speeds (2) 840,970 rpm
Grinding wheel surface speed 33 m/sec
Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm
Drive – total power required rated 31 kva
Output of workhead motor 3 kw
Nwsdpfx Acoh U Rzne Hsr
Output of wheelhead motor
Electrics 15 kw
415V ,3Ph,50Hz

Equipped with:-

Additional wheel flanges, coolant system with clarifier and splash guards.

FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Seller

Registered since: 2021

28 listings online

Call

Send inquiry

Telephone & Fax

+44 114 3... show

These listings may also fit your interest.

Listing

Chain production machine WAFIOS/VITARI KEH 5 / KEH 3

Đakovo

8,738 km

Chain production machine
WAFIOS/VITARIKEH 5 / KEH 3

Call

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Factory Consists : Nwjdeqy E I Uepfx Ac Hsr - Welding machines 14 pieces - Bending machines 10 pieces - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler - Cementation furnace - Annealing furnace Lots of sapare parts

See details

Listing

Roll grinding machine 1600 x 6000 x 60 T CINCINNATI Roll Grinder GRW 60 / 1600

Babberich

7,577 km

Roll grinding machine 1600 x 6000 x 60 T
CINCINNATIRoll Grinder GRW 60 / 1600

Call

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Nsdjvvvw Espfx Ac Hewr Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

See details

Listing

Montbrison

7,834 km

SAFOP parallel lathe
SAFOPLEONARD 1500

Call

Condition: excellent (used), Year of construction: 1971, Centre lathe (parallel lathe) Nsdpfxjw Az Hdj Ac Hewr Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Max. swing over bed (bed with 4 guideways): 2,200 mm Max. swing over carriage: 2,000 mm Max. turning length: 10,000 mm Max. load between centres (without steadies): 15,000 kg Spindle speeds (4 ranges): 1–100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Equipped with: 4-jaw chuck, dia. 2,000 mm 3 roller steadies

See details

Listing

CNC Universal Lathe MAG IAS DUS 800 ti/6000

Germany

7,870 km

CNC Universal Lathe
MAG IASDUS 800 ti/6000

Call

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Nwodpfx Acsvwcwus Hor

See details

Listing

Centerless grinding machine LIDKÖPING 4A

Fuente de Cantos

7,534 km

Centerless grinding machine
LIDKÖPING4A

Call

Listing

Floor type boring machine Pama Speedram 2

Albano Sant'Alessandro

8,189 km

Floor type boring machine
PamaSpeedram 2

Call

Condition: ready for operation (used), travel distance X-axis: 18,000 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,600 rpm, spindle diameter: 160 mm, CNC FLOOR TYPE BORING MACHINE MAKE PAMA MODEL SPEEDRAM 2 X AXIS: 18000MM Y AXIS: 3600MM Nsdpfxev Rv N Rj Ac Hjwr Z AXIS: 700MM V AXIS: 800MM (RAM TRAVEL) Z+V AXIS: 1500MM SPINDLE DIA: 160MM,ISO50 SPINDLE MOROR:65KW SPINDLE SPEED: 1600RPM ATC: 60POSITIONS MILLING HEAD: MANUEL MILLING HEAD: AUTOMATIC CNC ECS FLOOR PLATES 4NOS(4000X1500) 1NO(3000X2000) ROTRY TABLE: NOT AVAILABLE

See details

Listing

Thread Milling- and Hobbing Machine WANDERER GF 327 x 7000

Malsch

7,893 km

Thread Milling- and Hobbing Machine
WANDERERGF 327 x 7000

Call

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm Nwedowgizdopfx Ac Hjr max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

See details

Listing

Amurrio

7,504 km

Vertical lathe
DYETV 5400

Call

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg Nwsdpfsr I Ayksx Ac Hjr

See details

Listing

CNC Lathe Geminis 4 Plus 720 x 3000 mm Geminis CNC 4 Plus 720 x 3000 mm

L'alcúdia de Crespíns

7,913 km

CNC Lathe Geminis 4 Plus 720 x 3000 mm
GeminisCNC 4 Plus 720 x 3000 mm

Call

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Nsdpfxowuligo Ac Hewr Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

See details

Listing

330bar 59l/min High-pressure pump unit Hammelmann HDP 77

Rheda-Wiedenbrück

7,705 km

330bar 59l/min High-pressure pump unit
HammelmannHDP 77

Call

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW Nwsdpfx Acorzuwms Hjr with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

See details