Milling machine with moving column

TOS KUŘIM FRPD 16X30

Year of manufacture: 1970
Serial number: 50 052
The machine was overhauled in 2007.

GENERAL CHARACTERISTICS OF THE MACHINE
The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks.

The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time).

Clamping Table:
Dimensions of one table: 1,600 x 3,000 mm
Total length of connected tables: 7,000 mm
Clamping surface of connected tables: 6,500 mm
Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs
Table height from base: 900 mm
Travel of one table: 3,000 mm (connected tables: 6,500 mm)
Table feed rate: 20 – 2,000 mm/min
Rapid traverse: 4,000 mm/min

Gantry with height-adjustable crossbeam:
Clearance between side columns: 2,020 mm
Crossbeam height adjustment: 110 - 1,685 mm
Crossbeam feed rate: 1,450 mm/min

VF 160 Horizontal Headstock:
Taper: ISO 60
Motor power: 30 kW
Speed range: 15 – 710 rpm
Feed rate: 10 – 2,000 mm/min
Number of speeds: 16

Dcedpfx Adjxxwy As Nog
VF 120 Vertical Headstock:
Taper: ISO 50
Motor power: 18 kW
Speed range: 28 – 910 rpm
Number of speeds: 16

Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

The listing was translated automatically. Translation errors are possible.