Debarking

Valon Kone VK 26

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, power of feed motor: 7,500 W, Due to restructuring, we are offering this operational Valon Kone VK26LY debarking machine, year of manufacture 1983. Manufacturer: Valon Kone Model: VK26LY Year: 1983 Condition: operational Category ID: 1381 Type ID: 1837 Machine type: debarking machine Please refer to the attached diagram for key technical data. Maximum log diameter according to manufacturer: 10 – 60 cm. We recommend a range of 10 – 40/50 cm. Cpodpeymxvpofx Ah Ijw Recently installed spare parts: - Shaft - Bearing blocks - Slide rails All components are functional and adjustable. Sharpened knives and used spare knives are also included. Dismantling and loading must be carried out independently. Loading equipment can be provided if required. A video is available upon request. If you have any questions or require further information, please feel free to send us a message.

Condition: used, Smoke chamber 1 trolley Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cjdpfx Ahjwr A Eye Iepw Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Cpjdpfefn Iu Iex Ah Iew Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Ring debarker type VK26MX with centering infeed conveyor and driven out feed guide work. Codpfx Aex Svx Hjh Iepw Electrical starter cabinet included. Min log diameters 10 cm Max log diameters 60 cm Min log length 2 meter Feeding speed 22 - 41 m/min

Condition: used, Valon Kone VK26M Cedpfovgtz Nex Ah Iepw With infeed and outfeed conveyors.

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer Cpodpfx Aewt Ry Ujh Iow - Suitable for VK 26 models - Available immediately

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Cpsdpfxstwrp Ds Ah Iow Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP