Straightening and cutting machine

VITARI NR 350 E

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Itsdpfx Adswi S Ixokeg Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Itodpfoh In Thjx Adksg Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7600, Offer Number: D08L/7600 Machinetype: straightening and cutting machine Make: WAFIOS Itodpjwi S N Nsfx Adkeg Type: RS40S Constr. year: 1980 diameter range: 4-10 mm cutting length: 3000 mm speed - meters/min: 130 Location: In our warehouse

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data Itsdpfowu Dcxsx Adkog 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm nail length: 32-57 mm Isdpfxowi Tl Es Adketg output - pieces/min: 2000 Location: Europe

Condition: used, SCHNELL Automatic Stirrup bender PRIMA R 12 Full revamped “as new”, Up to 12 mm Main Characteristics - Single strand: 6 / 12,7mm - Double strand: 6 / 10 mm - Max bending angle: 180° - Central mandrel diam.: 20 / 50 mm - Max pulling speed: 95 m/mm to 310 m/mm - Max bending speed: 1450°/sec - Bending distance: 1500 mm to 4´-11” - Avg. power consumption: 3 kW/h - Working pressure: 7 bar - 90/100 psi Single strand: 6 / 12,7mm Double strand: 6 / 10 mm Max bending angle: 180° Central mandrel diam.: 20 / 50 mm Max bending speed: 1450°/sec Bending distance: 1500 mm to 4´-11” Avg. power consumption: 3 kW/h Ijdpfx Aoymcbiedketg Working pressure: 7 bar - 90/100 psi

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, drawing speed: 10,000 mm/s, inner diameter: 600 mm, load capacity: 3,000 kg, wire diameter (max.): 14 mm, Year of manufacture 1999 Maximum speed 10 m/s Total installed power 230 kW Key status Complete electrical modernization TEUREMA EHS-110 wire drawing line, a heavy-duty industrial machine equipped with a Tecno Impianti drawing bench and designed for reliable production performance. The line has undergone a complete electrical modernization, including a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, 100% new wiring and new push-button stations, significantly improving reliability, maintenance and overall operation. Line configuration Pay-off stands 2 tilting pay-off units. Maximum coil weight per unit: 3,000 kg. Vertical pay-off tower 6-meter tower with lifting and lowering carriage operated by hoist. Descaler Mechanical descaler. Lubrication box 1.5 kW motor at 1,500 rpm. TECNO IMPIANTI drawing bench 2 passes. Double-ring capstan: Ø 610 mm and Ø 760 mm. 3-speed gearbox: 3.90 / 7.20 / 10.00 m/s. Power: 160 kW. Frequency: 50 Hz. Horizontal coiler Horizontal drive. Maximum coil weight: 3,000 kg. 2-speed gearbox: 7.3 / 10.0 m/s. Maximum coil diameter: Ø 1,200 mm. Core diameter: Ø 600 mm. Useful spool width: 900 mm. Power: 45 kW. Technical data • Incoming wire diameter: 5.5 to 14 mm • Outgoing wire diameter: 4 to 12 mm Itsdpfx Adjy Ex Ecekog • Number of blocks: 1 vertical • Maximum line speed: 10 m/s • 2 x CL30 A 33 Eurolls cassettes • Rollers: Ø 150 x Ø 90 x 15/20 mm • Total machine power: 230 kW • Frequency: 50/60 Hz Electrical and automation upgrade • Completely new main electrical cabinet • Siemens S7-1500 PLC • Siemens HMI 1200 • 100% new wiring • New push-button stations This line combines the strength of a proven industrial machine with a complete upgrade of its electrical and control systems, making maintenance easier, improving reliability and simplifying integration into modern production environments. Available services • Installation • Assembly • Commissioning • Technical assistance TEUREMA EHS-110 wire drawing line, manufactured in 1999, equipped with a Tecno Impianti drawing bench and capable of operating at speeds of up to 10 m/s. The machine features a complete electrical modernization with a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, completely new wiring and new push-button stations, offering a robust, reliable and production-ready industrial solution.