Center lathe

Weiler Condor 81

Condition: used, Max. turning length: approx. 800 mm, center height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, manufacturer: ELESTA, type: VISULESTAIIE, with Multifix steel tool holder, magnetic chuck, coolant system, splash guard, and machine light, as well as various machine accessories. Nsdpez Nhpbsfx Ai Tslh

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale. Nsdpfx Asvadqzoi Telh

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake: can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Njdpfx Aioz Ehzzs Telh Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock Njdpfxoz D Hx Ne Ai Tjlh >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall Nedpfx Aowrm Dtei Tolh >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, L + Z lathe WEILER, Type Condor 81 A Machine No. 36553, Year of manufacture approx. 1985 Distance between centers 750 mm Swinging diameter over bed 330 mm Distance between centers above bed 165 mm Swinging diameter over cross slide 180 mm Distance between centers above cross slide 90 mm Spindle bore 40 mm Chuck mount Short taper DIN 55027, size 5 Tailstock internal taper MK 3 Tailstock quill travel 110 mm Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear stages - 3-jaw chuck Ø 160 mm RÖHM with boring and turning jaws - Quick-change tool holder Multifix size B with 3 inserts - Automatic feed in longitudinal and facing directions - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 rotating center - Electrical diagram and operating manual Space requirement L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Good condition Nodpfxok S Ht Ao Ai Tjlh