Weinig jointing and rebating cutter

Weinig

Condition: used, Year of construction: 2009, machine/vehicle number: 113680, functionality: limited functionality, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working width: 20–230 mm Working height: 8–120 mm Infeed table length: 1,950 mm Feed rate: 6–12 m/min Number of spindles: 5 Spindle diameter: 40 mm Spindle speed: 6,000 rpm Max. tool diameter vertical spindle: 232 mm Max. tool diameter horizontal spindle (except for the first spindle): 200 mm Spindle arrangement and power 1. Spindle, bottom: 5.5 kW 2. Spindle, left: 7.5 kW 3. Spindle, right: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, bottom: 5.5 kW MACHINE DETAILS Connection voltage: 400 V Connection power: 32 kW Fuse rating: 64 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,400 x 1,350 mm Weight: 2,500 kg EQUIPMENT 5-spindle version Four-sided machining Infeed table CE marking Cedozrmptspfx Ac Doha Note: The 5th spindle is defective.

Condition: used, Year of construction: 1980, used, in top condition Make: Raimann Model: K 23 Year of manufacture: 1980 Chain width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure bar / with pressure bar 110 mm Feed speed max. 8 - 35 m/min steplessly adjustable Saw blade diameter: 360 mm x 80 – bushing Shaft diameter: 65 mm Minimum workpiece length: 290/750 mm Extraction connection D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Location: 97447 Gerolzhofen, free loaded, unpacked Chsdpfx Acsxuv Nuo Dsa Handed over in as-is condition, as inspected No guarantee or warranty

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Chedezdk Hyjpfx Ac Dea Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Chjdpfxjy T R Tue Ac Dja Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller Chsdpfxjzr I Rlj Ac Doa - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1986, total width: 6,030 mm, total height: 1,500 mm, Colour: Green Dimensions (LxBxH): 175 x 603 x 150 cm Four-sided planer Weinig Profimat 22N Serial number: 226 - 742 400v, 40Amp. Max working width 220mm Max working height 120mm Input table length 1950mm Throughput speed 4-20 m/min Spindle diameter 40mm Speed spindles 6000 U/min 1st spindle, bottom: kW 2nd & 3rd spindle, left & right: kW 4th spindle, top: kW Chedpfxswnhh Ss Ac Doa Dimensions; 3400x1500x1400mm, Own weight 1600 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 226 - 742 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 140 - └ Spindle 2: - - Spindle type: Right - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 120 - - Tool present: Yes - Min. planing width [mm]: 50 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1970 - Feed roller diameter [mm]: 140 - Tool type: Standard - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 135 - Voltage [V]: 400 - Current consumption [A]: 40 - Fuse [A]: 50 - Transport dimensions: 1750mm x 6032mm x 1500mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm Chsdpfeylmmmjx Ac Doa • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: used, Raimann KR 450 multi-blade saw Track width: 450 mm Cutting height: 120 mm Chsdpfx Acozr Epfe Doa Material discharge chute with side discharge

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Chodpfszh Hw Aex Ac Dea Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: used, total length: 2,300 mm, total width: 1,600 mm, total height: 1,450 mm, Colour: Blue Weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19031 - Main motor power [kW]: 15.0 - Arbor hole saw blade diameter [mm]: 40 - Min. saw blade diameter [mm]: 120 - Max. distance between saw blades [mm]: 2450 - Max. cutting width [mm]: 2450 - Max. cutting height [mm]: 75 - Table length [mm]: 1700 Chodpfxszrza He Ac Dja - Table width [mm]: 1000 - Conveyor motor power [kW]: 2.2 - Conveyor width [mm]: 2450 - Voltage [V]: 380 - Fuse [A]: 63 - Power [kW]: 18.0 - Transport dimensions: 2300mm x 1600mm x 1450mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels