Electronics / Drive technology

WMW ERFURT PEE 160 III

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Ksdpfju N A U Ijx Akwodt For inquiries about this press, please select your offer option! in progress. *

Year of construction: 1978, condition: used, pressure 100 t Kdedpfxslp U Dpo Akwst throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Ksdpfjhz Ua Sjx Akwedt

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Kdsdpfx Ajk S Htxekwst Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Kdjdpfx Akerm Nqmowet Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm Kdsdpfsugnpiox Akwet total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm Kdedpfxslp U Dds Akwjt tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm Kdedpfolp U D Eex Akwjt weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Kdedpfswir U Ejx Akwjt Ram plate thickness 100mm Table plate 1250 x 700mm Table plate thickness 180mm Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm Kedpjlp U Daefx Akwjdt total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m