Hydraulic Try-out Press

Calende 160T Hydraulische Probierpresse

Condition: used, pressure 160 t passage width / mm Dodpfxeiulkqs Admjwf stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm Dwjdpfx Ajrfxhkedmjf TABLE DIMENSIONS: 2500x1400mm

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Dwedpfx Adsdzqptsmef Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressure:200 t Dedpfx Adofxyi Demewf table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Dsdpfef A R Uhox Admowf Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Stroke length: 400mm Dwsdpfxouhl E Rs Admjf

Condition: good (used), functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Dodpfx Adowhc H Aemowf Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, pressing force: 315 t, table width: 1,600 mm, table length: 1,100 mm, overall weight: 40,000 kg, working height: 1,300 mm, stroke length: 700 mm, Equipment: safety light barrier, Press Müller ZE_315_16 315T Djdpfx Adev Hp Acomswf A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE_315_16 315T Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, functionality: unexamined, pressing force: 3,200 t, For sale: Used Dieffenbacher hydraulic press with a pressing force of 3200 tons. Originally designed for heavy-duty forming applications in the metal and automotive industries. Condition: used. Location: Montenegro. Contact us for more information. Dwjdpfx Adsxft S Iemef

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen Dsdpfx Aev Rwftodmswf met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken