Cnc lathe

Binns & Berry Versa Turn 7 x 7000mm CNC Lathe

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Fgjdpfx Afsv Rm Iwo Eja

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Fgsdpfev I T Ewex Af Eja Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: good (used), functionality: fully functional, Machine specifications: Fsdpfx Afsx H Ifze Esga Swing over bed: 1300 mm Maximum turning length: 4000 mm Description: The machine is in good technical condition; test run is possible by prior arrangement. Machine weight: 15,800 kg Machine dimensions (L x W x H): 7,425 x 3,475 x 2,535 mm Connected load: 82 kVA Center height over bed: 650 mm Maximum workpiece weight between centers: 10,000 kg Maximum swing / machinable diameter over cross slide: 940 mm Maximum swing / machinable diameter over bed: 1300 mm Maximum turning length / distance between centers: 4000 mm Spindle bore diameter: 104 mm Spindle diameter at front bearing: 180 mm Spindle speed range (rpm): 1st gear 0-100, 2nd gear 0-200, 3rd gear 0-400, 4th gear 0-800 Rapid traverse of longitudinal slide – max. working feed: 8 m/min Rapid traverse of cross slide – max. working feed: 6 m/min Tailstock quill diameter: 180 mm Quill stroke: 300 mm Accessories: SAUTER turret 0.5.480.532, Universal chuck 800 mm, Faceplate 1200 mm, Steady rest – small 300 mm, Steady rest – large 500 mm, Chip conveyor with container.

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Fgjdpfx Ajx Hvvujf Eea Turning diameter 720 mm Some technical details are shown on photos. Machine is located in Germany.

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Fodpfxewp Nv Hj Af Eoga Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Fgsdpfx Afewd D Its Eea

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Fgsdpjwxfaaofx Af Esa

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES Fgodpfx Afeyhrnuj Esa CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Fgodpewywgbefx Af Esa Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE MAKE JOHNFORD, MADE IN TAIWAN MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT Fsdjukuprjpfx Af Eoga PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING