GURUTZPE lathe model Super A, 6,000 mm

Gurutzpe Super A 400/6000

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized and has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers Guodpfsva Elajx Aqgsh - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Gujdpfx Aewd D Itoqgoh

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Gsdpfx Aqswywgbegjuh Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm spindle head A 11 DIN 55026 Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm Gusdpfx Aqszluhwegeh feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 26,5 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 - Extensive accessory package - NOT INCLUDED: Tools on the turrets! - Full-stroke clamping cylinders on BOTH spindles

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Guodpfxewxfaaj Aqgjh

Condition: used, Year of construction: 2004, turning diameter 620 mm turning length 2000 mm Gujdpfx Aez Icunoqgsh control MSX 501 total power requirement 30 kW

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE MAKE JOHNFORD, MADE IN TAIWAN MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT Guodpfx Aqeukupregjh PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING

Condition: used, Year of construction: 2003, turning diameter 1010 mm turning length 6000 mm control Siemens type Sinumerik 840D turning diameter over slide rest 650 mm Guodpfx Aeyqv Tyoqgsh 3-jaw chuck Schunk Rota Plus 3-jaw-chuck diameter 500 mm bed width 750 mm steady 450 mm Rotating speeds 1100 U/min length of gap 500 mm steady 450 mm spindle passage 104 mm workpiece weight 7000 kg main drive 52 kW turning speeds 5-900 U/min total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1999, turning diameter 1010 mm turning length 6000 mm control Siemens type Sinumerik 840D turning diameter over slide rest 650 mm 3-jaw chuck Schunk Rota Plus 3-jaw-chuck diameter 500 mm bed width 750 mm steady 820 mm Rotating speeds 1100 U/min length of gap 500 mm steady 450 mm spindle passage 104 mm workpiece weight 7000 kg main drive 52 kW Gedpsyqu Uijfx Aqgjuh turning speeds 5-900 U/min total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team