Edge sanding machine

Daiß und Partner HBA 320 S

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed Hodpewcpqqefx Agijg 2-axis control Mill arbor with 40 mm diameter and 150 mm length

Year of construction: 1996, condition: excellent (used), Automatic slotting machine with two oscillating tables BALESTRINI 2CAP Hodpfxsgmucpj Agieg Maximum length of the groove 120 mm Maximum recess depth in mm 80 Spindle speed 9000 rpm Spindle motor 3 Hp Oscillating motor Hp 1 Pneumatic clamp for the workpiece Overall dimensions: mm 1000 x 900 x 1250 Weight kg 500

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Hsdpoupw R Aofx Agisg Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request Hjdpek Abl Nsfx Agieg 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: used, with 7 spindles used Machine inspected, test run performed Adjustments checked, lubricated Manufacturer: Hemag Type: Milling Rotor 190 Machine No.: 703134 Motor: 7.5 kW Mechanical brake Hjdjwrtldspfx Agijg 3 speed stages Forward and reverse operation Spindle: 7 units Spindle diameter: 30 mm Max. tool diameter with fence: 210 mm Max. tool diameter in machine: 140 mm Table size: 1300 mm x 1050 mm Extendable frame support Milling fence with fine adjustment Extraction connection D 120 mm Required space approx. 1300 mm x 1100 mm x 1200 mm Weight approx. 1100 kg Total connected load: 7.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty.

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: Hjdpfswztr Nox Agieg - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Year of manufacture 2007 Hjdpfx Agowudlyoisg

Year of construction: 1996, condition: used, with multiplex fence plates wood newused, good conditionmake Schneideryear of manufacture 1996milling fence with fine adjustmentnew price approx. 2,500.00 EURsuction connection D 120 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as viewed,without guarantee and warranty Hsdpfxjvxr Ncs Agisg