Machining center

Deckel Maho DMU 60T

Condition: used, DECKEL MAHO DMU 60T HEIDENHAIN 426 – worktable dimensions (length x width): 900 x 500 mm Knjdpfowg Df Dsx Akwjb – table load: 350 kg – maximum feeds in the X/Y/Z axes: 600/525/ 500 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Kodpfxorxrklj Akwjnb Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Year of construction: 2001, operating hours: 26,266 h, condition: used, Colour: Grey Empty weight: 7.000 kg Knjdpfx Aoywt Nyekwob Dimensions (LxBxH): 350 x 220 x 240 cm Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 26266 - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, External cooling - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Knjdpfxjzpxdws Akwsb Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Knjdpfx Asy U Naiekwob Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment • Chip conveyor Knjdpezhm Etjfx Akwsb Dimensions Machine Depth 3000 mm

Condition: used, Year of construction: 2001, operating hours: 17,800 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: TNC 430, table width: 600 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,800 h, spindle motor power: 15,000 W, Equipment: documentation/manual, Tool magazine, 20 positions, SK 40 taper, controlled by TNC 430. Kodezd Dbwspfx Akwjnb

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Kodpotk It Ssfx Akwenb Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Kedezd Aw Depfx Akwonb Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate, X/Y/Z-axis: 26/26/20 m/min Number of tool changer positions: 20 Spindle taper: SK 40 Table clamping surface (L x W): 1,000 x 600 mm MACHINE DETAILS Control model: Heidenhain TNC 430 Total power consumption: 26 kW Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: good (used), For sale is a Deckel Maho DMU 60T machining center. The machine can be inspected on site. Ksdpfx Aeydm Saokwonb

Condition: excellent (used), Year of construction: 2019, 3 x Miyano ABX-51SYY2 Years: 2016, 2018, 2019, 2021 Alps ASR RX45/51EV automatic bar feeder Fanuc 31i-B CNC Control Swarf coveyor Twin Spindles Twin Independent 12 Station Turrets Knodpfjzq Aqdex Akwjb Full Y-Axis on both Turrets Driven Tooling T Thermal Compensation Tooling package Operating manuals Service history (where available) Barloader Alps Tool ASR RX 51Ev Machines available in October 2026

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine Knjdpfeu Idgcjx Akwob tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm Knodsvn Utcjpfx Akwob max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg Knjdjw Ebtvopfx Akwjb ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability.

Condition: excellent (used), Hello, I have for sale a Deckel Maho DMU 60T Machining Center. Control: Heidenhain 430 Machine Technical Condition – Excellent Year of Manufacture: 2000 Country of Manufacture: Germany Machine Specifications: X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 18,000 rpm Tool magazine: 24 tools (2 x 12 positions) Heidenhain linear scales on all axes Through-spindle coolant supply Chip conveyor High-pressure coolant system Central lubrication system Hydraulic tool clamping Spindle taper: SK40 Full programming manual Mechanical and electrical documentation Loading included in the price Knodpfxsy Rb Dfs Akwsb About us: For 19 years, Stal-Com has been engaged in the sale, servicing, and training on CNC machines from the DMG group. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. All machines undergo a meticulous technical inspection. Besides Polish customers, our machines are also purchased by clients throughout Europe and some parts of Asia. Each machine can be inspected during operation, as we additionally carry out machining services ourselves. After purchasing a machine from our company, we provide staff training and can also assist with commissioning the production of parts at the client's facility. We work with many companies on a long-term cooperation basis, supplying them with subsequent machine tools.