Low loader semitrailer

DOLL Tiefbett T3H-S3FS25

Condition: excellent (used), axle configuration: 3 axles, color: blue, Year of construction: 2019, Equipment: ABS, = Additional Options and Equipment = - Lifting axle - Air suspension Duodpjuxxc Tefx Agmel = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lifting axle; Steering Technical condition: very good Visual condition: very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOW LOADER 3x SAF hydraulic steering axles Last axle is liftable Remote control Air suspended Tyre size: 245/70/R17.5 Neck length: 308 cm Extendable loading platform Loading platform length: 678 cm + 300 cm extendable (total loading platform length: 978 cm) Width of loading platform: 254 cm Loading deck height: approx. 89 cm Kingpin to rear of low loader: 927 cm Total length: 987 cm 4x hydraulic support legs Lashing eyes/rings Prepared for twistlocks for 20 ft container Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines available for sale. Wir sprechen Deutsch We speak English Hablamos Español

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) Dusdpfotx Nwnox Agmsl * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: used, maximum load weight: 45,400 kg, overall weight: 66,000 kg, axle configuration: 3 axles, first registration: 08/2012, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Equipment: * BPW axles, all axles hydraulically steered * Tyres 245/70 R 17.5 * Stanchion pockets, lashing rings * Removable loading bolster * Aluminium insert floors * Hydraulic axle compensation * 2 inch king pin * ABS * Tractor unit with hydraulics required * Additional steering Dusdpfx Aexuchkogmsl * Detachable neck * Folding extensions * Small ramps at the front of the loading bed * Side walls on the neck * New TÜV inspection available on request

Condition: used, empty load weight: 28,700 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, first registration: 07/2009, next inspection (TÜV): 05/2026, tire size: 285/70 R19,5, color: yellow, Equipment: ABS, Drum brake EBS Payload 69,300 kg Mercedes-Benz Arocs 2663 LS heavy-duty tractor unit Color: yellow 591,100 km Roadworthiness inspection (HU): 09/2026 Diesel Urea tank (AdBlue) First registration: 09/2017 Displacement: 15,569 cc 460 kW ABS On-board computer Differential lock Hydraulics (PTO) Tipper hydraulics Lane assist EBS ESP Low noise Navigation system Parking heater Stationary air conditioning Cruise control Traction control Additional headlights Euro 6 C 3 axles Wheelbase: 3,400 mm Tire size: 385/65 R22.5 - 315/80 R22.5 Perm. total weight: 26,000 kg Payload: 15,425 kg Dujdox Nqibepfx Agmol Unladen weight: 10,575 kg Retarder Fully automatic transmission Leaf-air suspension Turbo retarder clutch Technically possible gross combination weight: 70,000 kg at 12% / 100,000 kg at 8% Engine-side PTO Sun visor Beacon lights Air horns Air-suspended cab 1 bunk VIN: 10167342 Subject to errors and omissions.

Condition: used, Year of construction: 2008, Extendable superstructure: Yes Production country: DE Dujdpfxjxixpaj Agmjl Please contact Theo Lelie for more information

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Equipment = Djdpfewifrdjx Agmsul - Lift axle - Air suspension = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire size: 265/70/19.5; Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Tire size: 265/70/19.5; Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 3: Tire size: 165/70/19.5; Twin tires; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED AXLES 1 LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMITTED GROSS WEIGHT 48,000 KG TIRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE BY 515 CM PLATFORM WIDTH 255 CM PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS