Horizontal machining center

Elumatec SBZ122

Year of construction: 2018, condition: used, functionality: fully functional, Used Machine For the economical and efficient machining of aluminium, plastic, and steel profiles. All operations such as milling, drilling, and thread cutting are performed with the profile bar stationary to protect the profile surface. Continuously adjustable A-axis positioning from -120° to +120° Linear guides for clamp displacement, high spindle performance Machining results are improved by intelligent control technology. Rapid positioning of the machining unit at up to 120 m/min via dynamic servo drives. Thread cutting without compensating chuck Automatic clamp detection and positioning Automatic tool changer with twelve tool stations (without tools) Modern 4-axis control No reference run required for the main axes due to use of absolute encoder systems Collision avoidance through automatic clamp detection and positioning Power-torque milling motor with closed-loop speed control for short spindle acceleration and braking times Certified, drive-integrated safety functions Kdsdpjyr H Abofx Agdoi Low power consumption thanks to intelligent control technology Energy recovery via intermediate circuit coupling of axis drives with feedback and buffering of braking energy Green-Line cooling unit for the control cabinet with reduced energy consumption Windows operating system 15" flat-screen display, USB ports, and network connection Simple and convenient program entry via eluCam at the operator terminal, even during machining Remote maintenance via TCP/IP with Internet access Machine equipment: Cabin for operator protection Four horizontal pneumatic material clamps One material stop, left HSK-F63 tool holder Chip disposal via chip trays Minimum quantity lubrication High-performance cutting fluid Handheld control device Depth gauge Technical data: Max. machining length without end face machining: 4,050 mm X-axis travel: 4,176 mm, Vmax. 120 m/min Y-axis travel: 1,040 mm, Vmax. 60 m/min Z-axis travel: 540 mm, Vmax. 30 m/min Machining directions: 3+2 (top, rear, front) Positioning accuracy: ±0.1 mm Milling spindle speed: max. 20,000 rpm Milling spindle output: 7 kW, SI (water-cooled) Tool holder: HSK-F63 Automatic tool change Twelve tool stations in automatic magazine Disc milling cutter diameter: 120 mm Tool length (from taper): max. 150 mm Automatic clamp displacement Basic clamp (with round guide) Software: eluCam Compressed air connection: >7 bar Electrical connection: 400 V, 50 Hz, 22 A Air consumption per minute: approx. 185 l with spray Machine accessories: 1x 122200809 Full enclosure SBZ122/7x (rear wall + roof) 1x 136350823 Complete HSK-F63 d16 L=155 holder for disc milling cutter 1x 150379500 Disc milling cutter D=92x6.0 mm Z=14 d=16, carbide teeth 1x 122203105 Right-hand stop SBZ 122170171173 with 2nd clamping circuit, for overlength processing 1x Various used tool holders and cutters 1x ESTA Oilmac 3000 extraction unit, used Machine software: 1x 398206100 eluCad 1x 122206150 License for connection to eluCad 1x 398206201 eluCad option, data import package for ECW, NCW, and V6 files

Year of construction: 2009, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Kdedpfxjyqyaqo Agdei Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB connections Speed continuously adjustable up to 22,000 RPM handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 light barrier ranges and 2 material stops, enabling pendulum operation A total of 8 material clamps Spindle in good condition, spindle-insertion force: 12 kN Weight: approx. 2,000 kg

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Kjdpfxjw Dzags Agdjdi Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Kodpfx Agow Rv A Uodjdi Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: Kdsdjyg Ht Ajpfx Agdji - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Kdjdpfewgmyqsx Agdji Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Kdsdpfox Ecfkex Agdei Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Year of construction: 2006, condition: good (used), functionality: fully functional, Technical Specifications - Elumatec SBZ 122/20 Year 2006 16KW General Data Measurement width: 4622.8 mm Measurement depth: 1828.8 mm Measurement height: 2489.2 mm Machine weight: 1814.9 kg Main Drive Spindle speed range: 21,000 rpm Spindle motor power: 8.5 HP Kdodpfx Agow A Ipfjdoi Axis Travel X-AXIS Travel: 3777 mm Y-AXIS Travel: 350.5 mm Z-AXIS Travel: 279.4 mm Machine can be seen in operation in department 76 Available from week S38/S39 Price includes loading

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with a new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material clamps Kdsdpfx Aswwukxogdji Spindle in very good condition, spindle pull-in force: 12.5 kN Safety fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg