ES 750/300 Hl

ENGEL

Condition: excellent (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 248761, clamping force: 4,000 kN, screw diameter: 70 mm, clearance between the columns: 1,200 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,114 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,009 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,200 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 5,800 kg, heating capacity: 25 kW (33.99 HP), pressure: 200 bar, number of injections: 1, pump power: 56 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well-maintained. The machine only sprays PS. It features a CC300 control system. The machine has additional equipment, including 3 air valves, two hydraulic valves, 8 tool heating zones, a water reservoir with 8 zones, screw heater insulation, a euro-map for the robot, a robot track guard, and a system for operating with the rear doors open. The machine also has water blocks on both the moving and stationary tables, each with 8 outlets. The machine is being sold with the factory-installed robot shown in the pictures, but the robot system is not integrated into the machine, so it can be removed as a separate unit or a different robot can be installed in its place. Kljdpoznl Rbefx Ah Ajw

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 203836, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 90 g, total length: 3,800 mm, total width: 2,100 mm, total height: 3,100 mm, overall weight: 8,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, For sale is a vertical injection molding machine from the manufacturer ENGEL, model Insert 330V/80 Rotary (800 kN / 80t). Technical data: Machine type: Insert 330V/80 Rotary Year of manufacture: 2015 Machine number: 203836 Design/Construction: Vertical unit with rotary table Control system: ENGEL CC300 Drive technology: Ecodrive CLAMPING UNIT: Clamping force: kN 800 (80 t) Clamping unit design: Vertical / column-free or barrier-free Table design: 2-station rotary table INJECTION UNIT: Injection unit type: Type 330 Screw diameter: 30 mm Theoretical displacement volume: 99 cm³ Injection part weight: 90 g/shot Nozzle type: Needle-close nozzle Injection unit installation position: Vertical, from above HYDRAULICS, DRIVE, CONTROL CABINET & INTERFACES: Drive concept: ENGEL Ecodrive (energy-optimized) Automation interface: Euromap 67.1 Safety systems: Light curtain / protective enclosure for the work area MACHINE DIMENSIONS, TRANSPORT, AND WEIGHTS Installation dimensions (basic machine): 3,800 x 2,100 x 3,400 Transport dimensions: 3,800 x 2,100 x 3,100 mm Required hall height: 3,800 mm Total weight: 8,500 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Kedpfsznl Erex Ah Aolw Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, You can find more Engel machines on our website: Maschinen-Handel . eu Kodpfx Ahot A Ui As Aolw Technical details: Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameters: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety cage Turntable The machine has operated for approximately 33,107 hours in automatic mode.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Kljdpfx Ahjzncmtj Asw Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Klodpfx Ahezncmaj Asw Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request Klsdpfx Ahjznbf Us Ajw contact: Mr. Ralf Schulz

Condition: as good as new (ex-display), Engel Robot Drive, Robot Drive Module, Servo Drive Controller, Used Machine Manufacturer: Sigmatek (Engel) Model: Robotdrive M3-1 Year of Manufacture: 2018 Nominal Input Power: 4 kW Communication Interface: EtherCAT (high-speed industrial fieldbus system) Kljdpszmyrwjfx Ah Ajw Mains Input: 3 × 380–480 V AC, 50/60 Hz Output Voltage: 560 VAC Output Frequency: 0–8000 Hz Nominal Output Current per Axis (at 45 °C): Axis 1: 5 / 10 A Axis 2: 10 / 20 A Axis 3: 10 / 20 A Overall Dimensions: Width: 390 mm Depth: 210 mm Height: 190 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Kodpfxjzmxdls Ah Aelw Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Kljdpfjzmrf Nox Ah Ajw Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,235 h, functionality: fully functional, overall weight: 25,100 kg, The ENGEL Victory 2050/350 is a tie-barless injection molding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tons, and the screw diameter is 70 mm. Technical data at a glance: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar Kedpfx Ahszmmlwe Ajlw - Clamping force: 350 t - Screw diameter: 70 mm - Tool mounting height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 dosing unit - ENGEL ERC linear handling system - Longitudinal design - Parts removal cell with machine enclosure - Separator carton feed - Two-stage roller conveyor The tie-barless design of the ENGEL Victory series allows free access to the tooling area, which enables the use of larger tools on smaller machines and thus increases efficiency. This design also offers advantages in automation, as robots and peripheral devices can be more easily integrated. The machine is equipped with the ENGEL control system, which is known for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the cooling water requirement. In addition, the machine has a dosing unit from MORETTO and a linear handling system from ENGEL, which supports production automation and increases overall productivity. With a total of 62,235 operating hours, the machine is in used but functional condition.