Milling machine

Fehlmann PICOMAX 56 TOP

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Technical Data: Year of manufacture: 2017 Control ON: 15,247.30 hours (may vary) Program run: 5,059.39 hours (may vary) Table/Work area: > Travels X/Y/Z: 500/400/400 mm > Distance table to spindle nose: 120-520 mm > Permissible table load: 250 kg > Clamping surface (L x W): 908 x 480 mm Spindle: > Speed range: 50-12,000 rpm > Tool holder: ISO/SK30 > Drive power: 9.7 kW Blodpfx Aaoyfxdqs Hsd Space requirements/ Weight: > Required space (W x D x H): 1,700 x 1,900 x 2,668 mm > Weight approx. 3,350 kg Equipment: > 3D probe with infrared transmission > Table probe for tool measurement > 30-position tool changer > Spray and compressed air pistol > USB keyboard > approx. 30 ISO/SK30 tool holders > complete documentation > all transport safety devices included > Lang system (picture 2) not included in the price

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Bledpfxjw Uc Nps Aa Hjd Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: Bedexuppuspfx Aa Hjld • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: ready for operation (used), Year of construction: 2001, A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible. Bledov Ac Spjpfx Aa Hsd

Condition: ready for operation (used), Year of construction: 2000, A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Bjdswd S Unepfx Aa Hsld

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice. Bledpfxsyk H Nre Aa Hed

Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces. Blodjw R E Hiopfx Aa Hed

Condition: excellent (used), Year of construction: 2002, Used CNC tool milling machine Year of manufacture: 2002 Control manufacturer: Heidenhain Control type: TNC 426 Working area: X: 400 mm Y: 350 mm Z: 400 mm Clamping surface: 650 x 350 mm (fixed table) Milling spindle tool holder: SK40 Spindle speed range: 5 – 5000 rpm Feed rate: 0–2 m/min Tool changer: none Accessories: Standard, chip tray, handwheel & documentation including declaration of conformity and data backup Bledexz Rkyopfx Aa Hsd

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW Bodpsxab T Aefx Aa Hsld weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E