Separator

GEA WESTFALIA RTB 45-51-076

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm Kdedpolhrufefx Agdsi weight: approx. 13 t.

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Ksdsufih Depfx Agdsdi Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: good (used), Double-toggle jaw crusher Manufacturer: O&K Jaw width: approx. 1,000 x 850 mm In stock Kodev Rp N Rspfx Agdedi

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm Kdjdpfx Agjl I Dx Njdei opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Year of construction: 2003, condition: reconditioned (used), Overhauled machine Kedpfxeizkxws Agdsdi Disassembled ready for transport in container (2) Anti-wear linings New bearings Passing capacity 160 Tm hour Motor from 50 kw to 150 Kw depending on needs. Current motor installed 75 kw

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, inner diameter: 260 mm, wall thickness: 10 mm, overall weight: 870 kg, year of last overhaul: 2025, operating temperature: 100 °C, Decanter centrifuge, 5500 RPM, 1.5 m³/hour, 11kW, refurbished, bearings replaced, liquid discharge under pressure, in excellent working condition, documentation available = 18,500 EUR Decanter WESTFALIA CA 22.00.00 in excellent condition (green unit) = 22,000 EUR Kdodjxlpwtspfx Agdei

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Kdedpfx Asxt Dqqogdoi

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. Ksdpjvmxvfjfx Agdedi The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Ksdpfjyhc Ryjx Agdsdi Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Condition: good (used), Year of construction: 1985, functionality: unexamined, total width: 2,100 mm, total length: 4,150 mm, total height: 1,100 mm, overall weight: 7,200 kg, type of input current: AC, 2 pieces electromagnetic overband magnetic separators. 1 piece is overhauled ! Manufacturer: SKET Magdeburg Type: EMHB 1200 / 1700-L Connection cable: 7,0 kW Kdjdpfou Imz Njx Agdoi Weight: 7200 kg Dimensions Length: 4100 mm Width: 2100 mm Height: 1100 mm For conveyor belt systems with a belt width of up to 1200 mm. Belt speed up to a maximum of 2.09 m/s Automatic cleaning The electromagnetic overbelt magnet with automatic cleaning is installed above the conveyor belt and enables quick and easy separation of magnetic particles from the conveyed material. This separator is primarily used in applications with a high occurrence of ferromagnetic particles, where separation with manual cleaning would not be suitable due to the high level of contamination. Compared to permanent overband magnetic separators, the magnetic field of electromagnetic plates is much stronger and deeper. Electromagnetic magnetic separators are ideal for collecting parts with difficult shapes (such as screws, nuts, balls, etc.) and heavier iron parts. The extremely strong electromagnetic field also ensures the separation of ferromagnetic particles that are located under a higher layer of the flow. The electromagnet is also an exclusive solution for applications where it is necessary to deactivate the magnetic field for operational or maintenance reasons (which is not possible with the permanent magnet). Contributions of the separator application purified material (without ferromagnetic impurities) Permanent protection of technological systems continuous production operation automatic cleaning without interrupting the material flow minimization of operating effort and costs due to production downtime