Used Bridgeport Xr 1000 for sale (37)

Condition: excellent (used), Year of construction: 2012, Hardinge/Bridgeport XR 1000 Year of manufacture 2012 Heidenhain iTNC 530 Machine spindle hours: 50,600 h / 16,300 h X-axis 1,020 mm Y-axis 610 mm Z-axis 610 mm Clamping area 1,200 x 600 mm Table load 900 kg Gslhowgvw Seccqqsbl Internal coolant supply 20 bar Spindle taper SK 40 Spindle speed 10,000 rpm Accessories: Measuring probe, chip conveyor with coolant system, internal cooling, and complete documentation

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, BRIDGEPORT XR 1000 vertical machining center Year 2007 - Working hours approximately 13500 HEINDENHAIN iTNC 530 numerical control Axis travel X axis 1,020 mm Y axis 610 mm Z axis 610 mm Gbolhccsvw S D Rsqqjl Working area Table size 1,200×600 mm Maximum workpiece weight 900 kg Spindle Maximum rotation speed 12,000 rpm Tool warehouse BT-40 tool holder Tool magazine positions 30 Maximum tool diameter 125 mm Maximum tool length 300 mm Maximum tool weight 8 kg Tool change time s 4 Tool change time, from chip to chip s 6 Equipment Chip conveyor Internal cooling High pressure pump

Condition: new, Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain TNC 640, table load: 900 kg, spindle speed (max.): 12,000 rpm, Hardinge Bridgeport XR 1000 high dynamics vertical machining center New generation of the XR 1000 vertical machining center! Golhcjhw Nxuscqqjbl Control HEIDENHAIN TNC 640 Travel X / Y / Z: 1020 / 610 / 610 mm Distance spindle nose - table: 100 ... 710 mm clamping surface: 1300 x 600 mm max. table load: 900 kg spindle with 12000 1/min, DDS tool magazine 30 places magazine lock door central automatic grease lubrication IKZ 20 bar, switchable to compressed air link belt chip conveyor movable hand wheel

Condition: excellent (used), Year of construction: 2015, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Gbelhccqewfg Npeqjl Table load 700Kgs, Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC640, through spindle coolant, swarf conveyor

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 Machine 1 Year of manufacture 2012, Heidenhain iTNC 530 control system, X/Y/Z travel 760/610/610 mm, 30-station tool changer, SK 40 tool holder, Spindle speed up to 12,000 rpm, Through-spindle air flow, 20 bar internal coolant supply, Table clamping area 1000 x 600 mm, Max. table load 700 kg, Cooling belt chip conveyor, 3D measuring probe, Toolsetter, Infrared receiver, Gbjlewdwvdshccqqel Cooler, Thermo compensation, New spindle 02/2024

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 12,000 rpm, coolant supply: 20 bar, 3-Axis Machining Center Manufacturer: Hardinge Bridgeport Type: VMC-1000 XP3 Year of Manufacture: August 2006 Control: Heidenhain iTNC 530 Spindle Hours: n/a Technical Specifications: - X-Y-Z Travels: 1,020 x 610 x 610 mm - Spindle: 12,000 rpm / SK-40 Gbolhccjwc Eufsqqjl - 30-Position Tool Changer - 20-bar Coolant System with Grundfos Pump - 3D Hexagonal Workpiece Probe - IFM Oil Mist Extraction - Paper Belt Filter - Chip Conveyor - Machine Manuals

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, Machine-Details Stock-No. 1105-03805 Type of machine Machining Center - Vertical Make BRIDGEPORT HARDINGE Type GX 1000 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1000 mm y-travel 610 mm z-travel 610 mm control CNC FANUC OIMC table surface area 1150 x 540 mm rapid traverse 30/30/30 m/min turning speed range 12000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper BT 40 Gbolhcceiz Didsqqsl Additional information CNC FANUC OIMC - Synchronised tappin - - RS-232 Interface mm) - higher tourque CHIP CONVOYER with 4 axis nikken includ

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: heidenhain, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, CNC Heidenhain TNC 426P WORK AREA: Longitudinal X: mm 1020 Transversal Y: mm 510 Vertical Z: mm 500 Rapid X, Y axes: m/min 40 Rapid Z: m/min 25 SPINDLE: Spindle power: kW 19 Maximum rotation speed: rpm 10.000 Gslhcewcxbxscqqobl Spindle attachment: BT 40 TABLE: Surface: mm 1150 x 490 T-slots: 5 on mm 100 Maximum loadable weight: kg 900 TOOL CHANGER: Magazine positions: 30 Tool change time: sec 3.5 Maximum tool weight: kg 6 Maximum length: mm 250 Maximum diameter: mm 80 Machine complete with: •Instruction manuals and CE Declaration Year of manufacturing: 1997

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 0i-MC Main Drive Tool taper BT 40 Number of axis 3 This 3-axis Bridgeport GX 1000 vertical machining center was manufactured in 2008. If you are looking to get high-quality milling capabilities, consider the Bridgeport GX 1000 machine we have for sale. Contact us for further details regarding this machine. Gbslhcjv T D Ruscqqjl Application Types Milling

Condition: good (used), 1 used 3-axis machining center Make: Bridgeport Model: VMC 1000 Year of manufacture: 2001 Control: Heidenhain TNC 426/430 Travel ranges Longitudinal (X) 1020 mm Transverse (Y) 580 mm Vertical (Z) 600 mm Work table Size 1150x580 mm Gbslev Intpehccqqel Table load capacity 750 kg Feeds and rapid traverse Rapid traverse linear axes 40 m/min Main drive Speed range (infinitely variable) 40-12,000 rpm. Tool holder SK 40 Tool magazine Storage locations 22 Max. tool diameter 75 mm -with free adjacent location 120 mm Max. tool length 250 mm Coolant system Coolant tank volume 380 l Pump pressure jet cooling 3 bar Flow rate 70 l/min. Basic machine data Basic machine weight 4200 kg Machine dimensions 2.9x2.2x2.8 m Accessories Electronic handwheel Prepared for 3D radio button M&H Prepared for 4th-5th axis Documentation

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 machine 2, Year of manufacture 2012, Heidenhain iTNC 530 control system, travel X/Y/Z 760/610/610 mm, tool changer 30 times, Gbelhcsv Tm Iijcqqjl SK 40 holder, Spindle speed up to 12,000 rpm, Air blast through the spindle, IKZ 20 bar, Table clamping surface 1000 x 600 mm, max. table load 700 kg, Scraper belt chip conveyor, 3 D measuring probe, toolsetter, infrared receiver, cooler, thermal compensation, spindle replacement 07/2023

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 823679, Axis:XYZ (3-axis) Max. Travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530 Dimensions: 2320x4140x2690mm Gelhccjttm T Esqqebl

Condition: excellent (used), Year of construction: 2016, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC620, 12000 rpm, 30 station ATC, BT40 taper, swarf conveyor, Gjlhccowc Td Uoqqebl through spindle coolant,

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 610 mm z-travel 560 mm Control Siemens Gsleunty Dshccqqebl total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1997, Bridgeport VMC 500/16 Vertical Machining Centre Year: 1997 Control: Heidenhain TNC 370 Table Area: 830 x 360mm Golhccqswif Rasqobl 'X' axis Travel: 500mm 'Y' axis Travel: 340mm 'Z' axis Travel: 525mm Spindle Taper: BT 40 Spindle Speeds: 7000 RPM Toolchanger: 16 station

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Gjlhccqjwhpbgsqebl Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Gelhoqgcdtoccqqsbl Dimensions: 185x180x235 cm LxWxH

Condition: good (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Bridgeport VMC 760XP Gbelhccqeuk Nt Ejqsl Year of manufacture 2006 Heidenhain iTNC 530 Spindle speed up to 12.000 rpm Drive power 25 KW Tool changer 30-fold BT40 IKZ 20bar M&H infrared 3D probe Chip conveyor Total operating hours 30256 hrs. New Heidenhain SSD hard disk New Heidenhain power unit Machine is 2nd hand Machine can be inspected and demonstrated at our premises.

Condition: good (used), Year of construction: 2005, operating hours: 7,544 h, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc OiMC, workpiece weight (max.): 250 kg, table width: 400 mm, table length: 600 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 7,544 h, spindle nose: BT30/ISO30, number of slots in tool magazine: 20, tool diameter: 80 mm, tool weight: 3,000 g, Equipment: documentation/manual, This Hardinge Bridgeport DT-480 P3 is a very compact milling/drilling/tapping machine that is incredibly fast in operation with its 48 m/min rapid traverse and its optional Super-Fast change arm Additional information; Max. workpiece weight: 250 kg Max. tool diameter; 80mm max. tool weight; 3 kg Original documentation available. Gbolhccswcf Ryoqqjl Including MistAway oil mist extraction system. Vacuum table included but can be removed. Total machine weight; 2650kg The machine is in very neat condition and can be viewed working in our showroom in Schijndel.

Condition: used, Year of construction: 2005, x-travel 600 mm Gjlhsvxwq Eoccqqobl y-travel 500 mm z-travel 600 mm control iTNC530 table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m without vice

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm Gbelhcetylazocqqjl X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Year of construction: 2000, Condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Gbolhccsv Uqb Njqqol

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,117 h, Functionality: fully functional, machine/vehicle number: 723503, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: Fanuc 18i-MB Pallet size: 500 x 500 mm Gbolsvn Rf Iohccqqol X-travel: 710 mm Y-travel: 610 mm Z-travel: 610 mm B-axis: 360° (steps of 0.001°) Max. pallet load: 500 kg Spindle Spindle mount: ISO 40 (large-area spindle) Spindle speed: max. 10,000 rpm Number of tool positions: 60 pieces MACHINE DETAILS Dimensions: 3,675 x 4,510 x 3,100 mm Weight: 13,000 kg Operating hours: 730 h Cutting time: 5117 h Part counter: 55,588 pieces

Condition: good (used), various accessories for a Bridgeport milling machine according to photo Gbelheipidaeccqqsl 3 jaw chuck, face plates, cutters, collets and much more.

Condition: used, Year of construction: 1997, Functionality: fully functional, SPECIFICATION Fitted with variable speed head Table size 1219 x 230mm Longitudinal traverse 914mm Cross traverse 305mm Vertical traverse 340mm Gslhcsv Ipz Uecqqjbl Spindle to table 64 – 463mm Quill travel 125mm Quill feeds- per. Rev of spindle 0.038, 0.76, 152mm Ram movement 305mm Spindle speeds (inf. Variable) 50 – 3750rpm Spindle taper R8 Motor size 1.5/2.2kW Approximate weight 1061 kg   MACHINE EQUIPPED WITH Heidenhain 2 axis Digital Readout System Longitudinal power feed (inf. Variable) Lighting Coolant system Surround base splash tray