Used Bridgeport Milling Machine for sale (44)

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Gedpsxl R N Dsfx Afpjuh Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: used, Milling machine with Heidenhain control Bridgeport Interact 1. Runs perfectly. Gsdpfx Afoxiwkcjpouh

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Gujdpfx Aew Id U Hefpsh Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Guodpfjqgcdtjx Afpeh Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 823679, Axis:XYZ (3-axis) Max. Travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530 Gusdsttm T Espfx Afpeh Dimensions: 2320x4140x2690mm

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 Gsdpfjunhy Sox Afpjuh System resolution: 0,001 mm Documentation for machine

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Gujdpogvqkuefx Afpsh Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), various accessories for a Bridgeport milling machine according to photo Guedpfx Aoipidasfpeh 3 jaw chuck, face plates, cutters, collets and much more.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, table load: 300 kg, X - Travel: 600mm Y - Travel: 410mm Z - Travel: 520mm Table Length: 840mm Table Width: 420mm Table load: 300 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 7.5kW Speeds / ranges: 6000Rpm ATC / revolver: 22 Number of controlled axis:3 Length: 2000mm Width: 2050mm Height: 2535mm Gjdpfx Aoxdkcbofpeuh Weight: 2500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, x-travel 760 mm Godpfxoxbtnbs Afpsuh y-travel 610 mm z-travel 610 mm control Heidenhain 530 weight of the machine ca. 6700 t

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 Godpfx Afexf Ax Dopsuh MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: Sn . 821200, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, spindle speed (max.): 6,000 rpm, distance table to spindle center: 110 mm, Equipment: rotational speed infinitely variable, Bridgeport VMC800-22 X-Y-Z 801-511-509 mm Heidenhain TNC410 control 6.000 rpm BT40 22 toolchanger. Gusdpfx Aoxmvzzjfpsh 2140 x 2820 x 2560 mm Weight 3600 kg Built 03-1998 Machine is working

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the item within the timeframe from 01/12/2025 to 05/12/2025! Gedoxnk S Dopfx Afpeuh TECHNICAL DETAILS Travels Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Worktable Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D measuring probe Note: The machine vices mounted on the worktable as well as the tool holders (including tools) installed in the tool magazine and spindle are not included in the scope of sale or delivery. The oil mist extraction unit, which may be visible in the photos, is also not included in the scope of sale or delivery.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Gsdsxgqwdspfx Afpjuh Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Control Unit Brand SIEMENS Gedpfx Ajxl Hzvsfpouh Model 810T Main Drive Number of axis 3 Movement X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, Gujdsxfvnrspfx Afpeh 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: heidenhain, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, CNC Heidenhain TNC 426P WORK AREA: Longitudinal X: mm 1020 Gsdjwcxbxspfx Afpjuh Transversal Y: mm 510 Vertical Z: mm 500 Rapid X, Y axes: m/min 40 Rapid Z: m/min 25 SPINDLE: Spindle power: kW 19 Maximum rotation speed: rpm 10.000 Spindle attachment: BT 40 TABLE: Surface: mm 1150 x 490 T-slots: 5 on mm 100 Maximum loadable weight: kg 900 TOOL CHANGER: Magazine positions: 30 Tool change time: sec 3.5 Maximum tool weight: kg 6 Maximum length: mm 250 Maximum diameter: mm 80 Machine complete with: •Instruction manuals and CE Declaration Year of manufacturing: 1997

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, A set of 3 Bridgeport XR 700 HMCHP machines is up for auction: 1. Machine Serial number: 460P367 Year of manufacture: 2007 2. Machine Serial number: 460P389 Year of manufacture: 2007 3. Machine Serial number: 460P394 Year of manufacture: 2007 TECHNICAL DETAILS Travels X-axis: 710 mm Y-axis: 610 mm Z-axis: 610 mm Pallet size: 500 mm x 500 mm Maximum workpiece weight: 500 kg Gjdpfx Afsxgn T Njpeuh Number of pallets: 2 Spindle taper: BT-40 Spindle speed: 12,000 rpm Spindle motor power: 30 kW MACHINE DETAILS Control system: Fanuc Series 18iMB Dimensions & Weight Dimensions: 4,650 x 3,675 x 2,400 mm Weight: 13,000 kg Note: The machine requires transportation with oversize width.

Condition: used, Year of construction: 2017, operating hours: 7,400 h, machine/vehicle number: XRAB7L0006, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 43 m/min, controller manufacturer: Heidenhain, controller model: TNC640, overall weight: 6,750 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 1,850 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, For sale is a 2017 Hardinge Bridgeport XR-760 (Installed in 2018)CNC Vertical Machining Centre fitted with the Heidenhain TNC 640 control. A high-performance, rigid, and versatile machine designed for precision milling applications across aerospace, automotive, energy, and general subcontracting industries. This XR-760 offers an excellent balance of large capacity, high spindle speeds, and fast rapids, making it ideal for demanding production environments while maintaining high accuracy and reliability. Machine Specifications: Travel (X / Y / Z): 760 × 610 × 610 mm Table Size: 900 × 600 mm Max Table Load: 700–900 kg Spindle: 12,000 rpm, BT-40 taper, 18.5 kW (25 hp) Tool Changer: 30-station (twin arm, fast tool-to-tool change) Max Tool Diameter: 85 mm (125 mm if adjacent pockets empty) Max Tool Length: 300 mm Max Tool Weight: 7 kg Rapid Traverse: 43 m/min (X/Y), 36 m/min (Z) Cutting Feed Rate: Up to 20 m/min (20,000 mm/min) Accuracy (ISO 230-2): Positioning ±0.010 mm, Repeatability ±0.004 mm Coolant System: Through-spindle coolant (20 bar), washdown, air blast Chip Management: Swarf conveyor included Machine Weight: Approx. 6,750 kg Control: Heidenhain TNC 640 – powerful, intuitive, and highly reliable control system with advanced contouring capabilities. Condition: Guedpfx Afew S Nhgspeh Year of Manufacture: 2017 Very good used condition, fully operational. Maintained to a high standard. Available for immediate inspection. Highlights: Modern Heidenhain TNC 640 control (rare upgrade vs iTNC 530 on older units) High-speed 12,000 rpm spindle Generous 760 × 610 × 610 mm travels Fast and accurate – perfect for high-precision work Complete with through-spindle coolant and chip conveyor

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 machine 2, Year of manufacture 2012, Heidenhain iTNC 530 control system, travel X/Y/Z 760/610/610 mm, tool changer 30 times, Guedpfx Afjw Uf Ibopeh SK 40 holder, Spindle speed up to 12,000 rpm, Air blast through the spindle, IKZ 20 bar, Table clamping surface 1000 x 600 mm, max. table load 700 kg, Scraper belt chip conveyor, 3 D measuring probe, toolsetter, infrared receiver, cooler, thermal compensation, spindle replacement 07/2023

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand HEIDENHAIN Model TNC 426 Main Drive Number of axis 3 This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. It's a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine. Guedpfx Aoxl Hz Ajfpoh Application Types Milling

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm Guodjdt Ttkjpfx Afpoh spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, table width: 580 mm, table length: 1,150 mm, rotational speed (max.): 10,000 rpm, overall weight: 4,400 kg, spindle speed (max.): 10,000 rpm, coolant supply: 9 bar, Equipment: rotational speed infinitely variable, X-axis: 1.020 mm Y-axis: 610 mm Z-axis: 600 mm Table size: 1.150 x 580 mm Spindle taper: BT-40 Spindle speeds: 100 - 10.000 rpm Toolchanger: 30 pockets Controller: Heidenhain TNC410 Featured with: - Cooling through spindle 9 bar - 4th axis Hofmann WRMH-300R - ca. 20 tools - Tiltintable for the 4th axis - Machine manuals and documentation Country of origin: UK Motor power: 11 kW Guodpfew Sm Ukex Afpeh Machine weight: 4.400 kg Machine LxWxH: 280 x 240 x 270 cm

Condition: refurbished (used), functionality: fully functional, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, Retrofitting with TNC620 Digital, touch screen, control UPS, HR 510, 22 tool holders, Campin air conditioning Gjdpfx Aoxdtnajfpjuh

Condition: ready for operation (used), Year of construction: 2001, operating hours: 32,636 h, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 40−6000 Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 610 mm Z-Axis Movement 600 mm Tools Slots in storage 30 This 3-axis Bridgeport VMC 100/22 was manufactured in 2001 and features a spindle running time of 9609 hours and a machine running time of 32636 hours. It offers a large working area with travel paths of 1020mm x, 610mm y, and 600mm z. Equipped with a high drive power of 13 kW, precision flat guides on all axes, and an automatic tool changer. Consider the opportunity to buy this Bridgeport VMC 1000/22 vertical machining centre. Contact us for more information. Application Types Gjdjxfcqgepfx Afpeuh Milling