Used Demag Crane for sale (510)

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available Rjdpfx Ajh Uqbfsfcsp with 20 meter power rail included.

Year of construction: 1999, condition: good (used), Demag KBK crane sky crane runway dimensions approx 20 x 6 m Payload / lifting load 1000 KG - 1,0to Technical data of the plant: Crane runway from Demag CRC2 rails Mounting height variable, chain length about 4 m System comes complete: -KBK Rails, rail connectors -Fahrwerke, End plates, cable chain, holder / hanger etc incl. double bridge with Demag chain hoist 1to Conditioning is not like the pictures seen electrically driven - no travel drives! Rsdpfsct Dhysx Afcop Picture shows the same facility with 12x6m Shipping preferred possible pickup by freight Demag KBK1 KBK2 and KBK3 rails are in stock! Shipping via forwarding Truck 450 euros net within about 350 Km please inquire Other measurements or shipping prices, we will be immediately and non-binding offer!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 12,611 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ Redpfx Aoyftamjfcep • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: Rjdsyfq Alspfx Afcop • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolleys, 3.2 t, complete Rsdpfxewafido Afcjp with hoist PLV168 Very good condition, ready for immediate use 1 unit for €3,300.00 net 2 units for €6,200.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished or Hoisting motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Condition: excellent (used), DEMAG wheel drive motor 36/24 K6P for electric wire rope hoist P2000 / P1600, optionally with clutch and brake disc. Type 36/24 K6P, motor completely overhauled, in very good condition. Armature / rotor / runner, bearing end shields, clutch, and brake also available separately. Rjdpjv Uai Aefx Afcjp

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Height: approx. 2.7m UK boom: approx. 2.6m Projection: approx. 1.40+1.40m = 2.8m Weight completely approx. 300kg Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Rsdpfx Ajpwgrfefcjp Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) Rodpsyg Eu Ssfx Afcop 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 Rsdpfov Uvftjx Afcjp P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: BÜ177, Technical data: 1x Demag KBK 1 wall-mounted slewing crane SWL 250kg with Demag chain hoist 250kg Load capacity at full outreach 500kg / 0.5t load capacity Outreach: approx. 2m Total weight approx. 150kg incl. wall bracket Incl. pins, cable festoon, travel trolley, end cap, etc. Incl. Demag chain hoist NL 250kg (newer year of manufacture) Slewing range 300°, connection 400V 16A Rjdpfx Aew Hn Trjfcjp Crane is dismantled and immediately available Item location is 75053 Gondelsheim Additional cranes available, load capacity 80–5000kg, please enquire See pictures Shipping by freight forwarder or collection by appointment only

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Rsdpfx Afsh Dwhrjcop

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Rodjva Ht Sjpfx Afcep Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Year of construction: 2024, condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Demag Ergotech system 3 panel Rsdpfoqvuinjx Afcsp

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Rsdpfx Aoqvuigjfcop Demag spare part panel

Year of construction: 1985, condition: excellent (used), machine/vehicle number: AV, 1 Demag / AV Auguste Victoria Pillar Crane 500 KG payload / lifting load Crane is about 10x available. Outreach 4-5m, 500 KG payload. Also available with 2 outriggers !!!!! PLEASE INQUIRE - pictures by email Technical specifications : Payload at full reach max 500 KG / 0.5 to Redpfx Afod Dfp Tocjp Overall height 4.5m, outreach 4-5m, boom 3,7m, hook height 3m Weight completely approx. 1400 Kg with 500KG Demag PK2 / PK5 (1000Kg) chain hoist, 500V Year of construction approx. 1980-1995 Complete with pillar, outrigger, chain hoist, cable tow, landing gear and small parts Swivel range approx. 270 ° Item location is 75053 Gondelsheim Plant is completely dismantled and immediately available See pictures Shipping by forwarding or pickup Please ask for shipping costs by postal code

Condition: excellent (used), Chain hoists – DEMAG / STAHL – LIFTKET – 12 units: 1. Demag PK 10 – 1000 kg 2. Demag DKUN 5 – 500 kg 3. Demag D-BE – 160 kg Redpsvv Idwofx Afcep 4. Demag PK 2 F – 500 kg 5. Demag PK 2 N-F – 250 kg 6. Demag PK 1 N – 125 kg 7. Demag DKUN 2 – 250 kg 8. Demag PK 2 N – 500 kg 9. Demag PKVUN 1 – 125 kg 10. Demag Motor PKUN 1 – 125 / 250 kg 11. Stahl T 405 M – 1000 kg 12. Stahl T 302 S – 500 kg

Condition: used, You are in possession of an old hoist or crane, trolley or similar? Are you planning to replace / dismantle your machine(s) or plant(s)? Do you want to get the highest possible profit from their sale? We offer buying, selling, brokering and dismantling of machines, hoists, gantry cranes, industrial equipment and engines of various manufacturers all over GERMANY. Since we also operate throughout Europe and our clientele is very large and diverse, it is possible for us to broker even very special machines and pay the best possible and fair price. Please contact us. Gladly also via WhatsApp or by mail. We guarantee a very prompt response and look forward to a perhaps even long-term cooperation. With kind regards Maschinenhandel Richter Inh. Enrico Richter Rodpfx Ash Nurbefcep

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Rjdpfsya Ag Ssx Afcjp Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Rsdovzkylepfx Afcep Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc Rsdpox D Nxzjfx Afcop • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! Rjdpfxjty S A Nj Afcop NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: reconditioned (used), Year of construction: 2021, portalkran 2x35 ton 25 or 28 meter spann longer possible Rsdjggggpjpfx Afcjp

Condition: used, Year of construction: 2003, Portal crane 2x12.5 tons, 28 meter span. Drive and hoisting units by Demag. Crane travel with frequency control. Rodsf Dzqyjpfx Afcjp

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis Redpfx Afjx D Rqrocop • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg Rodpfeyfhw Hjx Afcsp X=420mm Y=1200mm Z=1500mm