Used Kone Crane for sale (24)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Bedpjyyu S Uofx Ahmsdh

Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine Manufacturer: KONE Cranes / Konecranes Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01 Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t) Span profiles: 14 m Lifting height (travel): 15.5 m Bdedpfjzi Ua Iex Ahmsh Condition: Used, in excellent and continuously maintained condition, ready for immediate operation Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system. Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height) Technical and operating parameters: Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am Rated lifting speed: 3.2 / 0.5 m/min Trolley travelling speed: 16 / 5 m/min Bridge travelling speed: 20 / 5 m/min Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum) Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED) Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED) Supply voltage: 3x 380V, 50Hz + N Control voltage: 48V, 50 Hz Main fuse: 160 A Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge Power supply: Festoon cable system Environmental fire hazard classification: Class "C" Protection class: IP 55 (motors), IP 54 (control panel) Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7042, Selling a used Valon Kone debarking machine, with an Airseal rotor and 90 kW drive, 4 different knife pressure settings, 6 knives, 8 individually driven feed rollers, feed speed up to 120 m/min. Dismantling is planned for spring 2027. A large spare parts package is available and included in the price, consisting of feed rollers, comb strips, pneumatic and hydraulic cylinders, and knife arms. Bdjdpoz Aq Eyjfx Ahmjh

Condition: used, functionality: limited functionality, Year of construction: 2005, machine/vehicle number: HN-BB, operating hours: 12 h, Crane, overhead crane, bridge crane, gantry crane Load capacity / lever load: 3.2t - 3,200 kg Gauge: 9600 mm, overall dimension approx. 9800 mm Year of manufacture: 2005 Lifting height: 6 m Overall height from top of crane to hook: approx. 600 mm Head beam length with buffer: approx. 2450 mm Crane is disassembled and available immediately. The following defects are present: Bsdpfozunz Aox Ahmjdh 1) Control valve missing - wiring diagram is available 2) Connector housings for the lifting motor and drive motors are partially broken (rather thin plastic) Used condition Column slewing cranes and wall slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, load capacity: 4,000 kg, Manufacturer: KONE Hint: MK10L1 Year of manufacture: 1986 Span: 9.3m Payload: 4t Lifting height: 6.3 m Wired remote control Bodpfxoumt Ire Ahmsdh Net weight: 2550 kg More sizes in the photos.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Bdsdpfxozz Tmqo Ahmeh

Condition: reconditioned (used), functionality: fully functional, • Infeed and centering table in front of the machine Bedpfjzn Ulzjx Ahmsdh • 6-36 cm diameter of the roundwood • 1.5 m minimum length of the logs • 1 set of new debarking knives • 1 set of debarking knives as a spare part • 30 kW main motor • 7.5 kW feed gear • Complete electrical system • Machine workshop-tested and newly painted •

Condition: not inspected (used), Year of construction: 1994, Portalkran 1x8 ton 12 meter 8 ton hoistingheight 10m Bdedpfegmdm Nox Ahmeh

Year of construction: 2000, condition: used, Well-maintained VK 26 MX for sale. The machine will be available from May 2027 and can also be inspected while in operation. Bjdpfxezkt Dbj Ahmjdh

Condition: excellent (used), Catalog number: 8079 TECHNICAL DATA - log diameter 60-360mm - min. log length 1500mm - rotor diameter 385mm - number of knives 4 - drive system: PTO shaft - dimensions (L/W/H) 2200x2900x1700mm - weight approximately 3000kg ADVANTAGES - PTO shaft drive - for debarking logs - country of origin: Finland - used debarker, very good condition Bdedpfx Ahezu Svwjmjh Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Bdjdpfx Aeu Hmacohmoh Machine workshop checked Machine cleaned and repainted

Condition: used, Valon Kone VK450 with infeed conveyor. Bdjdpfevt S R Aox Ahmeh

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Bdjdowfp Saepfx Ahmjh

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Bdodpfowfdi Hsx Ahmjh

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors. Bdsdpfxox Dip Ho Ahmjh

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. Bdedexhdtzjpfx Ahmoh The machine has been overhauled. 6-month warranty

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Bedpfx Astk N Dkohmedh

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Bdodpfx Ajpbbmlehmeh

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Bdodpfxsw Hy E Ts Ahmeh Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring.

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Bdedpfxjvgtz Ne Ahmeh

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm Bdjdpfx Ajwt Ry Uohmjh - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Bdjdskhcx Sjpfx Ahmsh

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Bdodpfsfn Iu Iex Ahmsh Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Bodstwrp Djpfx Ahmedh Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP