Used Elmag Kbm 16 T Vario for sale (63)

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop Cu3Vatayd3 - tool set - documentation

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK Dqpblx connected load frequency 230 V bore capacity in steel 16 mm throat 169 mm quill stroke 50 mm turning speed range - drilling 50 - 2250 U/min spindle drive 0,5 kW total power requirement 0,75 kW weight of the machine ca. 0,175 t dimensions of the machine ca. 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, ELMAG universal lathe PREMIUM CU 630 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings Bsmouoetbu - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6 pieces - Machine shoe Ø 160 mm, 6 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 2000 mm Center height 315 mm Turning diameter over bed 630 mm Turning diameter over carriage 430 mm Turning diameter without bridge 830 mm Machine bed width 400 mm Cross slide travel 315 mm Top slide travel 130 mm Turning tool cross-section, max. 32x32 mm Lathe chuck holder (DIN 55027) no. 11 Spindle holder (turning spindle) 120 mm Spindle bore 103 mm Speed range 1, infinitely variable 16 - 63 rpm Speed range 2, infinitely variable 63 - 250 rpm Speed range 3, infinitely variable 315 - 1250 rpm Longitudinal feeds (120) 0.04 - 12 mm/rev Transverse feeds (120) 0.02 - 6 mm/rev Metric thread dimension (64) 0.5 - 120 mm Metric modular thread (64) 0.125 - 30 mm Inch thread, threads G (64) 60 - 1/4 G/' Inch modular thread, threads G (64) 240 - 1 G/' Quill holder MK 5 Quill diameter 90 mm Quill stroke 230 mm Motor power 11000 W Mains connection 400/50 V/Hz Length (total) 3600 mm Height (total) 1400 mm Weight 3310 kg

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m Sembl longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, ELMAG universal lathe PREMIUM CU 400 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base frame / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Dpe8Jp Cross slide travel 235 mm Top slide travel 110 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (turning spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 - 265 rpm Speed range 3, infinitely variable 3: 144 - 790 / 4: 385 - 2120 rpm Longitudinal feeds (80) 0.015 - 0.6 mm/rev Transverse feeds (80) 0.0075 - 0.3 mm/rev Metric thread dimension (40) 0.25 - 7.5 mm metric modular thread (40) 0.0625 - 1.875 mm Inch thread, threads G (40) 120 - 4 G/' Inch modular thread, threads G (40) 480 - 16 G/' Quill holder MK 4 Quill diameter 50 mm Quill travel 100 mm Motor power 7500 W Mains connection 400/50 V/Hz Length (total) 2350 mm Height (total) 1330 mm Weight 1590 kg

Condition: new, ELMAG universal lathe PREMIUM CU 325 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck Ø 160 mm - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Lathe chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 16 x 16 mm, 7-piece - 7-piece insert set, 16 x 16 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 1000 mm Center height 165 mm Turning diameter over bed 325 mm Turning diameter over carriage 190 mm Turning diameter without bridge 440 mm Machine bed width 200 mm Cross slide travel 150 mm Top slide travel 95 mm Turning tool cross-section, max. 16x16 mm Lathe chuck holder (DIN 55027) no. 5 Spindle holder (turning spindle) MK 4 mm Spindle bore 32 mm Speed range 1, infinitely variable 85 - 405 rpm Speed range 2, infinitely variable 470 - 2200 rpm Longitudinal feeds (48) 0.006 - 1.77 mm/rev Transverse feeds (48) 0.003 - 0.885 mm/rev Metric thread dimension (48) 0.1 - 28 mm metric modular thread (19) 0.1 - 1.75 mm Bsmbtgwp7I Inch thread, threads G (53) 75 - 2.5 G/' Inch modular thread, threads G (19) 70 - 4 G/' Quill holder MK 3 Quill diameter 40 mm Quill travel 100 mm Motor power 2200 W Mains connection 400/50 V/Hz Length (total) 2150 mm Height (total) 1300 mm Weight 770 kg

Condition: new, ELMAG Universal lathe INDIVIDUAL 1000/200 - Vario incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Individual 1000/200 The Individual is a compact center lathe for the individualist and is ideally suited for training and maintenance. With infinitely variable speed control and a digital speed display, the machine always allows the cutting speed to be precisely matched to the material. Thanks to its precision bearings and 850 kg weight, the machine runs particularly smoothly and is designed for demanding continuous operation. It enables the production of turned sizes using slides up to Ø 200 x 1,000 mm. The INDIVIDUAL 1000/200 is powered by a 2,400 watt motor, has infinitely variable speed adjustment from 45 - 2,500 rpm and 48 longitudinal and cross feeds. ADVANTAGES Coolant tank and pump integrated in the machine base Stepless speed adjustment incl. digital display Dpd7Bn LED lighting Automatic central lubrication Digital position indicator for 3 axes with color display Electromagnetic motor brake Large protective cover for a clean working environment TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 260 mm Turning diameter without bridge 560 mm Bridge length 235 mm Cross slide travel 175 mm Top slide travel 95 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 5 Spindle holder (turning spindle) MK 5 mm Spindle bore 51 mm Speed 45 - 2500 rpm Infinitely variable speed steps Longitudinal feeds 0.043 - 0.653 mm/rev Transverse feeds 0.027 - 0.413 mm/rev Metric modular thread 0.4 - 7 mm Inch thread, threads G 4 - 56 G/' Inch modular thread, threads G 4 - 56 G/' Lead screw pitch 4 mm Lead screw diameter 22 mm Quill holder MK 3 Quill diameter 50 mm Quill travel 120 mm Motor power 2400 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2114 mm Width (total) 998 mm Height (total) 1700 mm Weight 850 kg

Condition: new, ELMAG gearbox milling and drilling machine MFB 30 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, it covers a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Taper arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Dpd39H Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 30 mm Tapping capacity M18 Milling capacity face milling cutter 80 mm Milling capacity end mill 20 mm Spindle holder (turning spindle) MK 3 Speed range 1 50 - 750 rpm Speed range 2 150 - 2250 rpm Infinitely variable speed steps Quill stroke 70 mm T-slots, width 14 mm Milling head stroke 370 mm Spindle projection 180 mm Milling head swivel range ± 90 ° Quill distance table 90 - 460 mm Milling table surface 700x210 mm Table travel X x Y 425 x 220 mm Motor power 1100 W Mains connection 230/50 V/Hz Cubature 700x210x460 mm Length x width 970 x 710 mm Height 1190 mm Weight 240 kg

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Bpgiypsxio Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 Dpbpn9 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: good (used), Year of construction: 2017, Functionality: fully functional, grinding length: 630 mm, grinding width: 330 mm, electro magnet plate coolant device Technische Daten / technical details: gr. Schleiflänge / max. grinding length 630 mm Crjetevojs gr. Schleifbreite / max. grinding width 330 mm Magnetspannplatte / magnet clamping plate 630x300 mm Längsweg Tisch / longitudinal travel table 765 mm Schleifscheibenabmessungen / grinding wheel dimensions 400x40x203 mm Antriebsleistung / drive capacity 7,5 kW Gewicht der Maschine / weight 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2003, on the pictures you can see the non-overhauled machine A new control system from SCM was installed a few years ago.- Manufacturer Elmag Superfici - Type TWIN SPRAY - Year of manufacture 2003 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - 2 cleaning scrubbers for different paint systems Uhzot7Faa2 - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of spray guns installed 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400/50 - Location, in stock

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm Bsg7Sln7Nw8 - Height 1530 mm - Weight 291 kg

Year of construction: 2005, Condition: not inspected (used), ROLLER COATER WITH ULTRAVIOLET DRYING ELMAG COMBI-VAL S3 OF OCCASION TECHNICAL FEATURES: - Folded and welded steel structure. S38Jng82 - TOTAL LENGTH OF 5.800 MM - Product applicator roller - Ultraviolet drying - Year 2005

Condition: good (used), Year of construction: 2022, Sandblasting cabin Elmag PAL 4 XL with suction cyclone and dust bag, year 2022, Max. workpiece size approx. 90 x 130 x 70 cm, working pressure 1,5 - 8 bar, safety foot pedal (start-stop), cyclone separator for abrasive recovery, ser.no.213533, glass pane has one crack Usv9Jgrf

Condition: new, ELMAG Mobile pneumatic light mast K45-360 600 watt = 85,000 lumen, 230 volt, 4.5 m extendable with integrated compressed air unit and wheel set and fold-out legs TOP safety: Tilt and locking sensors in the support legs ensure automatic retraction of the lighting column if contact with the ground is lost and prevent extension if the support legs are not locked. Variable 360° LED light head Flexibly adjustable LED modules enable both 360° illumination and directional light beams. The LED modules can be adapted three-dimensionally to the area to be illuminated. Dpftgh ADVANTAGES Flexible use for construction sites, events, fire departments, rescue services, police and disaster control Integrated air compressor for quick and easy extension Fold-out support legs with safety switch and locking indicator Rotary control for light activation and dimming function Integrated overload protection and residual current circuit breaker Series connection of several light poles possible via 230 volt output Equipped as standard with transport and carrying handle, wheel set and removable loading aid for one-man loading Walkway mode: enables attachment to existing structures (e.g. security fence) to enable operation with folded legs. Optionally available with radio remote control! Easy handling thanks to removable railing wheel set (standard) TECHNICAL DATA Light output 85000 lm 230 V connection Max. Wind stability 70 km/h Height extended 4500 mm Height retracted 1500 mm Length 1500 mm Width 400 mm Height 400 mm Weight 75 kg

Year of construction: 2003, Condition: used, Dust extraction with air nozzles and ionization. The air for dedusting is generated by a separate fan generated. No expensive compressed air is required. Technical data: - Manufacturer: Elmag Superfici - Type: SF - Year of construction 2003 - Working width 1.300mm - Max. Part height: - Installation length approx. 300mm - Diameter of top suction nozzle: 180mm - Diameter of bottom suction nozzle: 180mm Ceypctfw7M - 27 compressed air nozzles from above - 27 compressed air nozzles from below - Ionizing bar from above and below - 400V/ 50HZ - Location: Blomberg warehouse

Year of construction: 2022, Condition: good (used), Screw compressor Elmag / Mark MSM 4 D-270 AD 2000 m. ES 4000 Basic, year of manufacture 2022, 127 operating hours, 7489 standby switch-on hours, max. Operating pressure 10 bar, Effective delivery 516 l/min, with refrigerant dryer, Fz8Qsv9

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 100 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 125A-5p Shutdown: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Buku3Afwno Generator: Synchronous control AVR control Protection class IP23 E Speed governor DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Temp. indicator Trickle charge Light mast 5m manual Headlights 4x RP1000LED Tandem chassis

Year of construction: 2002, Condition: used, machine/vehicle number: 4152/E, Dedusting with air nozzles and ionisation. The air for dedusting is generated by a separate fan. No expensive compressed air is required. Technical data: - Manufacturer: Elmag Superfic - Type: SF- Year of construction: 2002 - Working width 1.300mm - Max. Part height: approx. 10mm - Installation length approx. 300mm Dqjufh - Diameter of top suction nozzle: 180mm - Diameter of bottom suction nozzle: 180mm - 27 compressed air nozzles from top - 27 compressed air nozzles from bottom - Ionising bar from top and from bottom - 400V/ 50HZ - Location: Blomberg warehouse

Condition: used, Year of construction: 2009, Driven roller conveyor with PVC-coated transport rollers for transporting workpieces. Power transmission via flat belt via transmission shaft. Absolutely smooth running even at high feed rates, feed frequency controlled. Technical data: - Year of manufacture 2009 - Transport length: 2,500 mm - Working width, usable: 1,300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 64 mm - Roller pitch: 125 mm - Adjustable feed rate (manual): 3-15 m/min - Installed power: 0.37 KW Gpcbzk

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min C93Czki - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2008, machine/vehicle number: 7281, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt Dpbpnv - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system Hu3Ovyw - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in one pass. Two brush sanding heads are installed on the left and right. Sequence: 1. the parts are conveyed via cross belts installed at 90 degrees to the feed direction to the right side as seen in the feed direction. 2. the right edge is sanded, 2 sanding brush heads are installed, which are adjustable in height and inclination. 3. the parts are conveyed to the left side at 90 degrees to the feed direction The parts are conveyed to the left side as seen in the feed direction. 4. the left edge is sanded, 2 sanding brush heads are installed, which are adjustable in height and inclination. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of the sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm Qedgmt7 - Year of construction: 2002 - For the control of the material a new Siemens S7-1200 is installed. - Location: at the warehouse