Used Elumatec Sbz 150 for sale (6)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Podpfxsw A Rv Io Ag Degk Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles, 7.3m Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The machine was serviced by Elumatec in March 2026 and has not been used since then. Interested parties are always welcome. We would be happy to demonstrate and let you test the machine at our facility. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel range A-axis: 0-90°, freely programmable - Swivel range C-axis: 0-355°, freely programmable - Max. machining length without end processing: 7300mm - Max. machining length with end processing: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 8 material clamps - Tool holder: HSK63 - Spindle power: 15kW / 22,000 rpm - 2-layer processing - Minimum quantity lubrication - Central lubrication - Saw blade: 400mm The machine is available immediately. Required space, see layout in the attachment. Transport instructions are also included in the attachment. If you have any questions, please contact us. Pgodpoy Dvq Hjfx Ag Djk Disassembly, loading, and transport should preferably be organised by the buyer due to reassembly requirements. Various aids can be provided by arrangement, as far as available. All information and dimensions have been described to the best of our knowledge, but we cannot guarantee completeness or accuracy! The sale is made as seen, without warranty, return or similar. Subject to prior sale.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting Pedpfeycul Sox Ag Dsgk EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Input voltage: 400 V Pedpfx Agoxx Uf Ne Dogk Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! Podpfx Agoxnz Ivs Dogk TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm Pgodpfxot Ea Tfs Ag Djk - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining