Used Fanuc Robot for sale (952)

Condition: used, Robot from Fanuc, installed since 2022 Ndjdpfxoxuq N No Afijc

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00684, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 210 Njdpfx Afjz Izckeiodc Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.04 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00723, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2024.03. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Payload (kg): 50 Ndedpfx Aez Uyp Rjfiec Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00719, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: R-30iB Mate Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR-10iA/10 manufactured in 2024.03. The robot comes with an R-30iB Mate Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR-10iA/10 Model Number: A05B-1144-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1101 Repeatability (mm): ± 0.01 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 46   Ndsdpfx Afez Uy Srsisc Controller: R-30iB Mate Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, 1 x Fanuc Backplane, 3-slot, A05B-2316-C105   1 x Fanuc A16B-3200-0042/05B900514 board   1 x Fanuc A16B-1212-0871/17C906140 power supply board   Alternative search terms   A05B2316C105   A16B3200004205B900514   A16B1212087117C906140   A16B-3200-0042   A16B-1212-0871   A16B12120871 Ndsdpfx Afew Tbyqoisc   A16B32000042   ATTENTION: Larger quantities may be available. You can find more Fanuc robots and components in our shop!   International shipping costs available upon request!

Condition: refurbished (used), machine/vehicle number: R-00700, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in {year_of_manufacture_robot}. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Nodpez U I Nxsfx Afiedc Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: {year_of_manufacture_robot} Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, Fanuc Level Shifter PREMOSYS VE-P-0001 Level Converter VEP0001 | VE-P Shifter PREMOSYS VE-P-0001 Level Converter Nedpfoxl S Ubjx Afiodc This module is used to convert encoder signals supplied by a standard encoder. These signals can have a voltage level of 5 to 24V DC. A potential-free conversion to an output voltage level of 5V DC with RS 422 characteristics is performed. In addition, the pulse frequency of the output signals can be output in division ratios of 1/2/4/8/16/32/64 and 128, and the counting direction can be inverted. All that is required for this is to switch a DIP switch. The division ratios only apply to the counting signals of the encoder (K1 and K2); the encoder zero signal is output undivided. Technical data: 5 to 24V supply of encoder signals Output signals 5V RS 422 Input frequency up to 1 MHz Division ratios 1 to 128 Optical status indicator DIN rail mounting Lockable connectors Manufacturer's price: €5,680 You can find more Fanuc robots and components in our shop! Larger quantities are sometimes in stock.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570 Ndodpfj Ad Allex Afiec   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: ready for operation (used), GMF Robotics Fanuc A05B-2051-C102 CRT/KB Unit Operator Panel, used, shows normal signs of wear, 100% functional. Nsdji D U Tnjpfx Afiedc

Condition: new, Year of construction: 2021, Model: M-900iB/330L Year of manufacture: 2021 Type: A05B-1335-B213 Serial number: R21Y20066 Maximum payload: 330 kg Maximum reach: 3203 mm Number of axes: 6 Repeatability: ±0.10 mm Vertical reach: 3539 mm Weight: 1780 kg Controller: FANUC R-30iB Plus Ndsdoz Sy Uhjpfx Afijc

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min Nodpezzxk Uefx Afisdc The technical details provided are given without guarantee, subject to error or omission.

Condition: good (used), Year of construction: 2012, functionality: fully functional, load capacity: 165 kg, controller model: 30iA, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, Used but good condition. Repeatability test done, greased, mechanical and RAM batteries changed. We have cleaned it up but it did come from a spotweld environment so has obvious signs of use. Ndedpfouqa Tisx Afioc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Ndodpszlc Tbsfx Afisc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Fanuc Robodrill D21LiB with FLEX-ROC automation cell Machine technical specifications Travel distances X-Y-Z: 700x400x330 mm Main spindle speed: 24,000 rpm Ndjdpfx Afozt I Aqeioc Tool holder: BT30 with Big Plus Drive power: 26 kW (1 minute) Tool change time: 1.6 sec (chip to chip) Connection value: 20 kVA Machine weight: approx. 2,500 kg Automation cell technical specifications Robot: Fanuc M10 ID/L Automatic gripper changer with 2 changing positions for grippers Max. part weight: 8 kg Max. workpiece size: 230 x 150 x 150 mm (adjustments for other sizes are possible) Part conveyor: 1700 x 580 mm Additional magazine for 43 tools, resulting in 64 tools in the system Connection value: 4.5 kVA Weight: 1,700 kg System equipment - 2-axis Kitagawa rotary table - Renishaw OMP 40 + OTS - Coolant system with 20 bar internal coolant supply, chip conveyor and band filter - Workpiece detection via camera - Automatic workpiece clamping with a centering chuck

Condition: used, Manufacturer: Fanuc Model: a22/3000 Motor Spec. A06B-0148-B675 Technical Data Output: 4 kW Voltage: 132 V Current: ~20 A Frequency: 200 Hz Speed: 3000 rpm Nsdju Egv Iopfx Afiodc You can find more Fanuc robots and components in our shop! Larger quantities are sometimes available in stock.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, FANUC ROBODRILL Alpha D21LiA5 with 4 axes Fanuc 31i control 4-axis – 360 degrees X-700mm Y-400mm Z-330mm 21-tool magazine for BT30 max 10,000 rpm Through-spindle coolant (IKZ) Ndjdpfx Afsz R Sdmsijc Renishaw workpiece probe Renishaw tool probe Chip conveyor with pumps Very good condition, 6400 operating hours

Condition: excellent (used), Year of construction: 2009, Technical Data Machining: 5 axes: 3+2 Travel distances X / Y / Z: 300 / (300 + 100) / 330 mm Spindle speed max.: 24,000 min-1 Control system: FANUC Series 31i-MODEL A5 Tool magazine: 21 positions Rapid traverse X / Y / Z: 54 m/min Table load, base machine: max. 200 kg, evenly distributed Tool length max.: 190 mm; Ø40 mm in the range of 120–190 mm Tool diameter at 150–12,000 min-1: 80 mm Tool diameter at 12,000–15,000 min-1: 60 mm Tool diameter at 15,000–20,000 min-1: 45 mm Tool diameter at 20,000–24,000 min-1: 40 mm Peiseler indexing head: AWUP, pneumatic clamping up to 6 bar Peiseler: Faceplate speed max.: 55 min-1 Peiseler: Tangential torque during circular milling max.: 250 Nm Peiseler: Transport load, faceplate vertical: 150 kg Peiseler: Tilting moment: 1200 Nm Peiseler: Tangential torque clamped (6 bar): 500 Nm Peiseler: Center bore: 50 H7 mm Peiseler: Faceplate runout: 0.01 mm Peiseler: Center bore runout: ±0.01 mm Peiseler: Positional accuracy from worm gear: ±15 arcseconds Connection, weight and dimensions Tool weight / total tool weight: 2 / 23 kg Machine weight: 2050 kg Electrical connection: 3 phases, 200/220 V, 50/60 Hz Connected power: 10 kVA Equipment and scope of delivery Peiseler AWUP swivel/indexing head for 3+2-axis machining Elbaron electrostatic filter, documentation RONA 60 SV Ndedpj Aba Ifefx Afioc Renishaw OMP40-2 measuring probe Blum measuring probe in the work area Extinguishing system according to the photos Technical specifications are subject to change without notice. Errors and prior sale reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Max. workpiece weight: 500 kg Machine weight: 1,700 kg Ndodpozvd Saofx Afisc Power supply: 13 kVA The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Njdjyhb D Eopfx Afijdc

Condition: like new (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, number of slots in tool magazine: 21, Equipment: chip conveyor, Fanuc vertical machining center Model: Robodrill α-D21LiB5 Year: 2016 Table size: 850 x 410 mm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Tool magazine capacity: 21 Control unit: Fanuc 31i model b5 Spindle speed (main spindle): 100-10000 rpm Spindle taper: BBT30 Spindle power: 11 kW High-pressure coolant system through the spindle: 15 bar Chip conveyor (belt type) Air blow through the spindle for dry machining Nedpfxjzz R Eks Afiedc 4-axis continuous table Maximum workpiece weight (spindle): 300 kg

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Nsdpfx Aozrh N Usfiedc Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), A02B-0076-K002 - 128K PC cassette MDL B Additional photos are available upon request. The price is negotiable. For more machines, parts, and other materials, please also visit our website, CNC-Service. Ndodpfszhkqgex Afijc Do you have any questions or are you looking for something specific? Feel free to contact us!

Condition: new, power capacity 4,8 kW volt / V ampere / A Fanuc A06B-0853-B304 Spindle Motor 5,5kW Ndedpfozlkx Esx Afiec Condition: New

Condition: new, power capacity 4,8 kW volt / V Nodpfx Ajzlkx Sefiedc ampere / A Fanuc A06B-0153-B088#0075 AC SERVO MOTOR 4,8 kW Condition: New

Condition: ready for operation (used), Fanuc A860-0356-X011 Pulse Coder 6S, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ndsdpfx Aozmlytsfiec