Used Gea Decanter for sale (188)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Hodpfx Acjvhctwe Asfb Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Hodpjvwfxzefx Ac Aofb

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Hfedpfxeip Utao Ac Ajb Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2013, Additional title: high pressure homogenizing Capacity range: 600 l/h Pressure: 250 bar Cellular particle size: 1 μm cellular particle Hfodpfx Aovcq Edec Aob Length: ca. 2,2 m Width: ca. 2,5 m Height: ca. 1,9 m Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Features: CIP-able, SIP-able

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CutMaster V 750 Bowl volume 750 l Max. cutting speed 132 m/s Max. no of revolutions 2860 rpm Hfjdpsvb T I Sjfx Ac Aeb Reverse mixing rpm 60 -500 Motor (standard AC) 208 KW

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Hfedpfx Acow Emh Es Asb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutter/Emulsifier Hjdpfx Aov Nxcqoc Asfb Make GEA/CFS Model EcoCut CAP 2 Year of manufacture 2010 GEA EcoCut CAP 2 is an advanced emulsifier designed for continuous production of both fine and coarse sausage emulsions as well as pork skin emulsions, suitable for mass production or just-in-time. Automatic knife adjustment reduces operating costs, and cassette double and triple knife sets enable quick changeover. The machine also offers a variety of pumps and silos for high and low viscosity products and a system for removing hard particles. Many original spare parts and a conveyor belt

Condition: excellent (used), GEA thermoformer, type: PowerPack NT, year of construction: 2014, foil width: 650 mm, dye: 4 x 3 (156 mm x 190 mm), total dimensions: 14500 mm x 1300 mm x 2800 mm Hfjdshkr Ddspfx Ac Ajb GEA PowerGuide Speed inliner, year of construction: 2013, lining 3 to 1, belt width: 830 mm, total dimensions: 2900 mm x 1050 mm x 1300 mm

Condition: ready for operation (used), Year of construction: 2015, The professional cutter GEA CutMaster V 500 L with cooking option is an advanced industrial device designed for precise grinding, mixing, and emulsifying meat products and other food raw materials. Manufactured in Germany by the renowned company GEA Food Solutions Germany GmbH, this model combines enormous power, reliability and modern technology. Technical data: Manufacturer: GEA Food Solutions Germany GmbH Type: CutMaster V 500 L Year of manufacture: 2016 Power supply: 3x400V + PE / 50 Hz Current consumption (FLA): 475 A Main motor FLA: 422 A Maximum power: 224 kW Connection power: 335 kVA Rated power: 2.2 kW and 7.5 kW Maximum steam consumption: up to 160 kg/h Hjdpowx Hw Tefx Ac Ajfb Electrical diagram: ECDC 154200 Country of manufacture: Germany Advantages of the GEA CutMaster V 500 L : Cooking option Unmatched power and speed – up to 224 kW maximum power Excellent emulsification and cutting quality thanks to precise control Ideal for the production of sausages, pâtés and stuffings Robust stainless steel construction suitable for intensive use Intuitive control interface and integration with other production line components Made in Germany – a guarantee of reliability and high quality standards

Condition: refurbished (used), Year of construction: 2020, operating hours: 144 h, functionality: fully functional, machine/vehicle number: 03, overall weight: 1,400 kg, type of input current: three-phase, temperature: 90 °C, power: 7.5 kW (10.20 HP), rotational speed (min.): 6,700 rpm, rotational speed (max.): 6,700 rpm, input voltage: 220 V, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 100 TPD Model: RTB 45-51-076 Hfodow Raltopfx Ac Aeb Condition- Rebuilt Along with Control Panel & VFD Tools and foundation frame (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Commissioning Spares (new)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Hfsdpfx Ajvt R A Doc Aob Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: refurbished (used), Year of construction: 2022, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 01, overall weight: 2,800 kg, type of input current: AC, temperature: 90 °C, power: 45 kW (61.18 HP), rotational speed (min.): 4,600 rpm, rotational speed (max.): 4,600 rpm, space requirement height: 2,159 mm, space requirement length: 2,362 mm, input voltage: 220 V, space requirement width: 1,727 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 600 TPD Model: RSE 220-01-777 Hfodjw Rakiopfx Ac Aob Condition- Rebuilt Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new)

Condition: refurbished (used), Year of construction: 2021, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 02, overall weight: 2,200 kg, type of input current: AC, temperature: 90 °C, power: 22 kW (29.91 HP), rotational speed (min.): 6,400 rpm, rotational speed (max.): 6,400 rpm, space requirement height: 1,651 mm, space requirement length: 2,082 mm, input voltage: 220 V, space requirement width: 1,778 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 300 TPD Model: RSE 120-01-777 Condition- Rebuilt Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new) Hfjdpsw Rakcefx Ac Ajb