Used Hundegger K2-Industry for sale (3)

Condition: good (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 7105, feed length X-axis: 16,500 mm, feed length Y-axis: 1,300 mm, workpiece weight (max.): 1,000 kg, cutting height (max.): 300 mm, total length: 45,300 mm, total height: 5,700 mm, cutting width (max.): 1,300 mm, total width: 16,800 mm, control cabinet width: 730 mm, saw blade diameter: 800 mm, overall weight: 31,000 kg, control cabinet length: 4,500 mm, control cabinet height: 2,500 mm, working length: 20,000 mm, working width: 13,000 mm, Equipment: safety light barrier, HUNDEGGER K2-Industry 1300 fully automatic sizing machine, consisting of: 1 ABM-I125 1 K2-Industry 1300 basic equipment, including: - Saw unit 13 kW - Automatic beam turning station - Control panel and switch cabinet - Safety devices 2 ROB-2500 1 Hundegger production program CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning device "Two-hand system" - with servo drive in the positioning carriage 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance Base machine price 7 ABM-1232 1 Machine frame K2-Industry 1250 - special length - price per meter 8 ABM-1816 1 Extension and encapsulation - Machine enclosure including preparation for dust extraction 9 ABM-2151 1 Infeed cross conveyor and infeed roller conveyor for max. wood length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-cut components 11 ABM-2851 1 Rough wood holder in front of the universal saw (multi-length processing) 12 HH-8501 1 Adjustable safety impact plate - infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Revolving milling unit - vertical (installed from above) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combined support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic - drilling direction vertical 18 ABM-5400 2 Vertical finger milling cutter 5.5 kW 19 ABM-B61 1 Combined support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW - drilling direction horizontal 21 ABM-5220 1 Pivoting drilling unit 45° (3.0 kW) - drilling direction horizontal 22 ABM-5751 1 Slotting cutter 7.5 kW - on the stop side 23 ABM-5500 1 Longitudinal and transverse groove milling cutter 24 ABM-5776 1 Slotting cutter 7.5 kW - on the operator side with pre-positioning (Y-axis) Godsza Ehrepfx Andeiu 25 ABM-4101 1 Double combined support - (on the stop and operator side) 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combined support 27 ABM-6000 1 Marking device at the rear (on the stop side) 28 ABM-6040 1 Marking device at the front (on the operator side) 29 ABM-6100 1 Marking and labeling device at the bottom 30 ABM-6180 1 Marking and labeling device at the rear (on the stop side) 31 ABM-6300 1 InkJet 4 system HP - on the stop side 32 HH-8610 1 Label printer at the control panel 33 ABM-2900 1 Wood removal hood = flap for removing short components on the under-table swiveling miter saw 34 HH-8640 1 Additional cost for a mobile control panel on rollers 35 HH-8645 1 Direct control of planing machines 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional wood storage point 38 ABM-8300 1 Feed roller from above 39 ABM-8416 14 Extension roller conveyor with adjustable rollers, max. width 1300 mm 40 HH-8521 1 Adjustable safety impact plate - discharge roller conveyor 41 AH-9001 2 6-strand transfer cross conveyor with wide flat belt chain HUNDEGGER Pick & Feed System designed for the following workpiece dimensions: Length: 2,000 - 15,000 mm Width: 100 - 680 mm Thickness: 60 - 300 mm Max. part weight: 400 kg Performance max.: 1 cycle in 1.5 min Stack dimensions: Length: 2,000 - 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with suction gripper Pos. 3 Spacer rack Pos. 4 Safety technology Pos. 5 Stack pattern input aid Pos. 6 Increase max. workpiece weight to 1000 kg

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Gjdpfjww Nuxox Andeiu

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. Gisdpfx Asxx T Rdsndeu The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.