Used Felder edgebander for sale (72)

EDGEBANDER FORMAT 4 PERFECT 710

Call

Condition: like new (used), Year of construction: 2020, Felder G 480 edgebander from 2020 for sale. The machine is like new, only 154 hours, 4,500 meters covered. Possibility to test on site. Technical data - Control panel with LCD display and keyboard - Adjustment for board thickness - Pre-milling unit - Feeding the edges - Infrared heating lamp - Glue container - Impact guillotine - Pressure unit - Ball cutting unit - Multifunctional milling unit (Felder Quick-Set) - Profile scraper unit - Flat scraper unit I7zekdprt - A caterpillar with a chain for feeding the pieces

more

Listing

Picassent

7,900 km

FELDER PERFECT 710

€16,500

Fixed price VAT not applicable

Call

Condition: ready for operation (used), Year of construction: 2012, Edge banding machine in good condition, in operation and can be verified. Inlet spindle moulders Prefusor Boiler Double end trimmer Upper and lower refiler Huy2vgs Single motor rounder Glue scraper Edge polisher

more

Listing

Szymbark

8,562 km

Edgebander

Felder G 480

€22,900

Call

Condition: as good as new (ex-display), Year of construction: 2020, For sale: 2020 Felder G 480 edgebander. The machine is BRAND NEW, never used! Bfuqezwvcqv Technical specifications: Control panel with LCD display and keyboard Thickness adjustment for the board Pre-milling unit Edge feeding Infrared heating lamp Glue container Guillotine unit Pressure unit Sawing trimming unit Multifunctional milling unit (Felder Quick-Set) Profile milling unit Flat milling unit Track with chain for feeding panels

more

Listing

Adlikon bei Regensdorf

7,994 km

Combined machine

Felder KF-7

€3,200

Fixed price VAT not applicable

Call

Condition: good (used), Year of construction: 1999, machine/vehicle number: 79-01/094-99, Functionality: fully functional, Types: KF-7 Machine nr:79-01/094-99 Bauhjare1999 Strom:3/400V/50Hz Amp:8,6 suva shoots Kell machines 3700,6500,7800 rpm Biof9xk7k9l Cutting table:2000X320mm Saw blade:4700 rpm kell and saw blade 45°

more

Listing

Biersdorf am See

7,710 km

Circular sawing machines

Felder K 500 S

€4,650

EXW ONO VAT not applicable

Call

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 442.04.056.21, Functionality: fully functional, Machine is as good as new - Year of construction 2021 - Saw blade D = max 315 mm - Saw blade speed 4800 1/min - Cutting height max 105 mm - Scoring unit - Tilt up to 45° by means of handwheel - Height adjustment by handwheel - Trimming carriage length 2500 mm anodized - Edging shoe Bikknnvdcyq - Cutting width to the right of the saw blade 800 mm - Angle fence 1300 mm with extension 3200 mm - Support table on angle fence 950 x 600 mm - Motor power 400 V 3 Ph. 4 Kw (5.5 HP) - Circular saw protection EURO II standard

more

Listing

Cantù

8,148 km

Surface planer

FELDER - AUSTRIA A 741

€2,500

Call

Condition: good (used), Year of construction: 2013, Code: 0137 Brand: FELDER - AUSTRIA Model: A 741 - CE Standard Surface planer - CE Standard - Year 2013 Technical data Bfzo92zymsi Working width mm 410 Worktable length mm 2000 Motor Hp 5,5 (Kw 4) N° 4 knives Patented table adjustment system Reference guide inclinable from 90 to 45 degrees Overall dimensions mm 2080 x 850 x 890 h Weight kg 480

more

Listing

Lambsborn

7,809 km

Swivel mill

Felder F900

€8,500

Circular table saw Circular table saw

Call

Condition: excellent (used), Year of construction: 2007, Felder swivel milling machine, with Aigner stop (original) And Felder F38 roller feed Aigner table extensions and clamping drawer 5.5 kw, 400 volt, year of manufacture 2007, high-performance spindle, Bfrotxll milling tool

more

Listing

Teisnach

8,159 km

FELDER K37

€2,690

Felder K500 S sliding table saw

Call

Condition: excellent (used), I am selling several machines, devices etc. for woodworking, forklifts, working platforms as well as accessories and spare parts. Please also take a look at my other auctions! Circular saw Circular saw Circular saw Carpenter's circular saw Circular saw FELDER Type: K37 Aluminum sliding table 240 cm Outrigger table with extendable aluminum cutting fence, Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence up to 125 cm Motor power main motor 4 KW prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information without guarantee. Dm79ur The machines can be picked up by the buyer or shipped by a forwarding agent at the buyer's expense. Loading and packing can be organized by us. The shipping costs are a guideline, depending on distance and unloading options, these may vary, please inquire. The sales price shown is the gross final price including VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is made exclusively to traders without warranty, guarantee and right of return. The buyer recognizes this with the submission of his bid. If the item offered is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13BGB. If the buyer acts as an entrepreneur in the sense of §14 BGB, any warranty is excluded. If the items offered are new items, the warranty period is 24 months if the buyer is acting as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

more

Listing

Colmberg

7,985 km

Felder K500 S

€3,362

Clean air extraction systems

Call

Condition: good (used), Year of construction: 2008, Year of construction: 2008 320 cm sliding carriage 5.5 kW motor with brake 102 mm cutting height 315 mm saw blade diameter Bilrzqgowpk Without scorer Cutting width right 82 cm Saw blade swivels 90° - 45° Fixed price: 4000 € incl. VAT

more

Listing

Breda

7,514 km

Felder RL 250 + pipes & connectors

€12,500

EXW Fixed price plus VAT

Call

Condition: new, Year of construction: 2022, In the case of the clean-air extraction systems in the fields, the residual dust value is less than 0.1 mg/cbm. These excellent clean air values are achieved by the special arrangement of the fans.  Whereas in conventional extraction groups the fan between the machine and the filter operates in positive pressure, in Felder's case the fan is placed on the clean air side and thus operates in negative pressure in the entire extraction system. N.B. All pipes, bends, hose connectors and pipe clamps as seen on the photos are included in the price! TECHNICAL DETAILS Test certificate: BG; dust-tested/GS  Volume flow: max. 5000 cbm/h  Nominal volume flow: 20 m/s; 3540 cbm/h  Negative pressure at 20m/s: 2500 Pa  Suction connection: 250 mm  Cartridge filter - filter area: 50 sqm chip tray: 2 x 250 l MACHINE DETAILS Total length: 2640 mm Total width: 1150 mm Total height: 2260 mm  Noise level: 75 dB EQUIPMENT - Filter against static charge  - Silencer for RL 250/300/350  - 9 chip bags for RL250/300/350 (1200 500 x1300 x 0,12 mm)  - Various metal pipes D=120-280,L=1000/1500, collar on both sides  - 90° / 45° bends D=80 - 250, collar on both sides  - Various 45° branches on all sides with flange D= 160-250 / 120-250 / 80-200 mm  - Fittings for flexible D=80 mm 5.90 (with rim)  - Hose connectors D=120, one side with collar  - Hose connectors D=250, one-sided with collar  - Various pipe clamps with quick clamping system+ seal Ø=80 - 250 mm  - Tube reducer D=250/160mm and D=200/160mm both sides with collar  - H/SE Flexible for suction D= 80/120/250 mm (1 meter)  - Hose clamps D= 70 90 / 125 / 120 / 160 / 240 260 mm  - 1 ST Automatic start-up with delayed run-out for 1 8 machines  - 6 ST Conversion coil for automatic starter  - 1 ST Installation of fume hood and piping.  - 1 ST Creemers compressor Mobil 270/50 220V; 73dB; LxWxH: 940x320x700mm. For automatic cleaning RL250. Connection material included. SAFETY - Water fire extinguisher and pneumatic filter cleaning system  - JET cleaning system  - Fire extinguisher  - Cartridge filters allow a larger filter area with the same space requirement  H70tpmxr22 - Cartridge filter system  - Explosion-proof  - According to EN 16770 standard  - Complies with ATEX 114

more

Listing

Sidzina

8,491 km

Combined machine

Felder BF 6-41

Call

Condition: used, Year of construction: 1993, Functionality: fully functional, Felder multifunction machine, planing width 41cm. Milling spindle 30mm, adjustable at an angle of 45⁰. The saw is set at an angle of 45⁰. Fields 3-roller feed. 3 separate 3 kW motors with brake. Bin8x0sakbr Very good condition

more

Listing

Krosno

8,593 km

Band saw

Felder FB 610

€2,300

Call

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, The Felder FB610 band saw is a professional wood cutting machine with exceptional precision and durability. It is ideal for woodworking in woodworking shops, carpentry shops and industrial plants. Model: Felder FB610 band saw Brand: Felder Type: Stationary band saw Year of manufacture: 2016 Dm8bqr Condition: Used, but in excellent working condition Robust design that guarantees stability and precision cutting. Adjustable cutting angle, which allows cutting at different angles. Large work table for comfort when working with large sheets of wood. Equipped with a dust extraction system, which helps keep the workplace clean. Safe and easy to use. If you have any questions or would like to see the machine, please contact me. Price: 9900 PLN net Year of production: 2016 Possible transportation.

more

Listing

Lambsborn

7,809 km

Edge banding machine

Felder G360-4

€12,900

Surface planer and thickness planer combination

Call

Condition: excellent (used), Year of construction: 2020, Felder edge banding machine, Type G 360-4, L772kx222f jointing router, flush saw, routing, scraper round and straight With spraying device Type G 360-4, 2,8 kw, Year of construction 2020 With spraying device

more

Listing

Kuchl

8,266 km

Felder AD5-31

€3,583

Call

Condition: good (used), - 4 system cutterblock - planing width 310mm Hw9v0tuvb - planing length 1500mm - max. passage 225mm - motor power 4kw - Extractable Ø 120mm

more

Listing

Stare Ślepce

7,967 km

CNC machining center

Felder FORMAT 4 Profit H 20

€43,000

Tilting table milling machine with table

Call

Condition: excellent (used), Year of construction: 2016, Operating hours: 6,800 h, FELDER FORMAT 4 PROFIT H20 machining center. Little used, serviced by FELDER. NUMBER OF WORKING HOURS - 6,700 I am the first owner. Sales without intermediaries, the machine is connected, you can check its operation on site. TECHNICAL DATA: Year 2016 - automatic central lubrication RANGE OF MOVEMENT ON AXIS: X - 3830mm Y - 1680 mm Z-275mm WORKING AREA: X - 3060 mm Y – 1210 mm – front row of base stops (Y – 1260 mm – rear row of base stops) Crkepg0j Z-100mm AXIS POSITIONING SPEED: X - 80 m/min Y - 80 m/nin Z - 25 m/min - 3-piece mats safety - mobile control panel - 2 work areas - folding console table consists of 6 laser-positioned consoles, which also help in positioning the suction cups, which allows for the safe mounting of almost all materials. Additionally, 4 pneumatically extendable supports make it much easier to place even very large and heavy elements - Becker vacuum pump 90m3/h - Electric spindle 10 kW HSK F63 1000-24000 rpm - electrical and pneumatic preparation for the assembly of the C axis - Magazine for 8 tools DRILL HEAD: - Vertical drilling machine with 14 spindles: 9 in the x axis and 5 in the y axis - Horizontal drilling machine with 4 spindles in the X axis and 2 spindles in the Y axis Spindle speed up to 6000 rpm, controlled by an inverter - Circular saw in the X axis, max. fi 120 mm - 7500 rpm The WoodFlash software in the Profit H20 Format-4 machining center belongs to the most modern generation - it is understandable and easy to use. Planning, drawing, construction and CAD functions enable you to plan and construct even the most difficult elements. For convenience, the software enables three-dimensional visualization of programmed elements. The ability to import DXF files makes the software compatible with external programs used in the architectural industry. I have a CNC set, an edge bander, a panel saw, a multi-saw, a wide belt sander, 2 100 cm aggregates, and a drill. Liquidation of the plant. For sale occasionally: 3 warehouses, production halls 2200 m2.

more

Listing

Mörfelden-Walldorf

7,838 km

Felder Format 4 Profil 45/07

€6,990

Call

Condition: like new (used), Year of construction: 2011, FORMAT4 Milling machine profil45 Trimming table 2000 mm without feed unit Milling fence "250" for profil 45 max. milling cutter diameter 250 mm, infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display. Entire fence electrically adjustable with electronic LED digital display and fine adjustment. Milling fence can be folded up and down Mobile trimming table 2000 mm Year of construction 2011 Motor cable 7.35 kW (10.0 HP) Direction of rotation switch L/R Socket for additional equipment for feed unit Speeds 3500/4500/6000/8000/10,000 rpm Digital speed display > Electric height adjustment > Electric angle adjustment 90°-45° Milling spindle D-30 mm, shank length/clamping length/usable length at 90° 150/157/140 mm Milling spindle with quick-change system Milling spindle locking from outside (for easy tool change) Tenoning and slotting table 1300 Anodized Bhs0uh32eqi Preparation for slotting disk cover for tools up to D-350 mm with speed limitation 4500 rpm. Slotting disk cover From 24.11.2023 in Mörfelden

more

Listing

Nattheim

(dealership location)

8,019 km

CNC-Bearbeitungszentrum

Felder Format 4 C-Express 920 C

Call

Condition: used, Year of construction: 2018, machine/vehicle number: 351.11.00217, CNC Bohrzentrum c-express 920 classic inkl. Spannzangensystem für die CNC Durchlauftechnologie. Bohr-/ Säge- / Fräsbearbeitungen von unten (optional ohne Frässpindel) Laser "0"Doppelreferenz Bohrkopf DH15 6H1S,9 vertikale-6 horizontale Bohrspindel, 1 Nutsäge X Richtung Einfachste Bedienung über grafische Fi8cym0o2n Bedienoberfläche. 1 Maschinensoftwarelizenz Sicherheitseinrichtung gemäß CE Konformität. Max Werkstückdim.: X 3000mm, Y 920mm, Z 50mm Min Werkstückdimension:X280mm,Y 180mm, Z10mm 19" LCD Farbdisplay, Maus und Tastatur Maschinendimension: 2100x1500x1950 Maschinengewicht: 850kg Zusätzliche Rolleneinlagen um die minimale Werkstückbreite auf 7"Omm zu reduzieren. CNC Werkzeugsatz für CXP 920 Classic bestehend aus: 1x Kreissägeblatt HW Leistungsbeschreibung des Programmiereditor: 1 Maschinenarbeitsplatz CAD-Funktion (spiegeln, rotieren, wiederholen usw). Graphische Darstellung von 5 Seiten Parametrische Programmierung mit Anwendung von geometrischen und mathematischen Regeln, bis zu 300 Variablen. Programmierung der Bearbeitung direkt auf horizontale und vertikale Flächen. Programmierung der Einzel-,Vielfach- und Reihenbohrungen, Beschläge usw... Programmieren von Schräg-Linien mit automatischer Geschwindigkeits-Kontrolle. Leistungsbeschreibung des Programmier-Editor Automatische Korrektur des Werkzeugradius. Möglichkeit gewisse Bearbeitungen auszuschalten. Mehrere Zoom Einstellungen. Bedingte Programmierung (Blöcke IF/EndIF} auch in Bezug auf Unterprogramme. Absolut und grammierung von Unterprogrammen mit Möglichkeit diese zu vervielfachen, zu spiegeln und zu rotieren. Graphische Darstellung für alle Bearbeitungen während der Programmierungsphase. Leichte Kontrolle des Programms mittels 3D Ansicht. Lange Programmnamen, bis zu 256 Zeichen. Abruf der MaschinenBestückung und Werkzeugeigenschaften. Taschenfräsen für "abgrenzende Formen"(Kreis Quadrat usw.) können In Form von Makros abgelegt werden. Einzelne Programme und wiederholbare Programmlisten. Optimierung der Werkzeugwege mit Möglichkeit gewisse Bearbeitungen vorrangig zu bearbeiten. Oszilloskop SW zur optischen Darstellung der logischen Zustände aller Ein- und Ausgänge und der Position der Achsen. Digitale Anzeige der Drehzahlen und Stromaufnahmen aller Motore. Import von Daten in Form von dxf-Dateien in ASCII-Format. Ausdruck des Iso-Codes oder graphischer Ausdruck des programmierten Werkstückes. BarCode Anbindung Dauer der Bearbeitung des programmierten Werkstücks. Frässpindel 3.3kW (S1) Spannzange ER32 manuell Maximale Drehzahl 24.000 U/min Werkzeugwechsel erfolgt manuell über mitgeliefertes Bedienwerkzeug. Befestigt an der Z-Achse, Bewegung über Kugelumlaufspindel Werkstück an Hinterseite entladen Auswahlmöglichkeit am Bedienterminal, ob nach der Bearbeitung das Werkstück auf der Vorderseite bzw. Hinterseite der Maschine entladen werden soll. Zusätzliche vertikale Klemme Zusätzlich vertikale Vorrichtung zum klemmen großer Werkstücke. Durch die erhöhte Haltekraft wird eine optimales Bearbeitungsergebnis garantiert. Betriebsanleitung c-express 920, Deutsch Lagerort: Nattheim

more

Listing

Maldegem

7,462 km

machining center

Felder format4 profit h150

€165,000

ZubrFELDER industrial feed unit

Call

travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 200 mm, Condition: as good as new (ex-display), Year of construction: 2023, Operating hours: 150 h, Format4's new nesting CNC profit H150 is the perfect panel cutting, drilling and milling center for furniture makers and joiners. Complete custom furniture with all bores, slots and joints are produced in just one work step. Modern nesting technologies ensure highest possible material and time savings. The profit H150 can be expanded through various loading and unloading solutions up to full automation and thus achieves maximum productivity. Bgyralkb2ln During automatic loading, the lift table positions the plate stack directly at the correct working height. Alignment of the sheet metal is done directly at the lift table and synchronously with the operations on the work field. This saves time and increases productivity. powerful 5-axis spindle with 12 kW guarantees excellent results when milling, drilling and sawing at any angle. Special liquid cooling and high-quality ceramic bearings guarantee lifetime accuracy and extremely quiet running in all materials. An inverter steplessly controls the speed up to 24 000 rotations per minute. Setting the parameters of your tools is made easier: every tool length is accurate to 1/100 mm. The machine is as good as full option, almost every option possible is here. For the full option list contact me and I will provide you with the details. The machine is sold due to end of activity due to health

more

Listing

66140 Malax, Finnland

7,604 km

Felder Variofeed 4

€890

Call

Condition: good (used), Year of construction: 1999, FELDER Variofeed 4 industrial feeder Power feeder, stepless with 4 rollers Year of manufacture 1999 Technical data Bgz0dpfslmw 4 rollers, 50 mm width Passage height max 180 mm Max. projection 390 mm Main motor power 0.75 kW Feed speed 3-18 m/min Adjustable feed speed Infinitely variable feed rate 2 directions of rotation Tilting unit Workpiece roller feed Height adjustment Threaded shaft Width adjustment Toothed rack CE marking Space requirement Length 1,200 mm Width 800 mm Weight 70 kg *Extra long steel bar 120cm *New castors *New tripod

more

Listing

Kuchl

8,266 km

Combined machine

Felder KFS-37FL

€3,833

Fixed price VAT not applicable

Call

Condition: good (used), - Cutting length 2400mm - Cutting width 650mm - cutting height 103mmm - max saw blade Ø 315mm L3tcjktspz - 3 cutting speeds - Direction of rotation switch - height adjustable + tiltable - Extractable Ø 120mm - 2 motors á 3kw

more

Listing

Colmberg

7,985 km

Fields Combi Machine

Felder CF 531

€8,400

Call

Condition: used, Year of construction: 2006, Year of construction: 2006 3 motors with 3 kW each, with brake Circular saw: Sliding carriage 205 cm 102 mm cutting height Saw blade can be tilted up to 45 0d8fa8e Thicknessing planer: 31 cm planing width 2 cutterhead reversible knives Thicknesser feed rate 6 m per min. Swivel spindle moulder 4 speeds 3 / 6 / 8 / 10,000 revolutions per minute Right and left rotation 30 mm spindle can be swiveled up to 45 Price: 8,400 € differential tax / VAT not shown

more

Listing

Gauting

8,129 km

Panel saw Felder Kappa V60

Felder Format Kappa V60

€10,000

Call

cutting length (max.): 3,200 mm, saw blade diameter: 250 mm, cutting height (max.): 2,080 mm, cutting width (max.): 4 mm, cutting depth: 60 mm, total length: 480 cm, total height: 293 cm, power: 3.9 kW (5.30 PS), Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 432.10.461.14, Functionality: fully functional, The machine is in very good condition, it is equipped with a center support for short workpieces and has a moving rear wall. Bhauqa0lenv There is a sliding aluminum carriage in the middle for dividing small parts. There is an additional fence and a strip fence with scale for cutting from above, the original machine tool is also included.

more

Listing

Nattheim

(dealership location)

8,019 km

Eckenkopiergerät

Felder ERM 1050

Call

Condition: used, Year of construction: 2014, machine/vehicle number: 14.304.027, Aufstelllänge: 780 mm Kantenstärke: 2 + 3 mm 9pn0ggmiw8 Werkstückdicke: 1050 mm Lagerort: Nattheim

more

Listing

Gerolzhofen

7,947 km

Panel sizing saw

Felder Format 4 Kappa V 60

Call

Condition: used, Year of construction: 2009, rear panel and support bars are renewed used make Felder Format 4 type Kappa V60 year of construction 2009 Masch.-Nr. 09140170 CE type approved motor 3,9 kW cutting length approx. 5200 mm cutting height: vertical 2200 mm horizontal 2080 mm center support saw blade diameter 250 mm free standing slatted motorized suction connection 100 mm weight approx. 1000 kg storage location 97447 Gerolzhofen, free on truck, unpacked Ce7r9ep delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

Tylicz

8,576 km

Edge Bander

Felder G 680

€11,900

Call

Condition: excellent (used), Year of construction: 2015, Pre-polishing cutters spray rapido plus full option Dmsftb

more

Listing

Grońsko

8,095 km

Edge Bander

Felder G360

€12,250

Call

Condition: excellent (used), Year of construction: 2021, Felder G360 edgebanding machine pre-cutters glue application B2oww7kxig pneumatic pre-application guillotine pressure rollers pre-cutting saw milling unit top and bottom R1 - R2 profile scroll flat scroll length of machine without plate 240cm feed rate 8m/min max height 45mm minimum workpiece length 210mm, width 70mm weight 450kg nice neat machine with low mileage 12.250m fully ready to work

more

Listing

Schwanberg

8,445 km

Circular sawing machines

FELDER K 540 S

Call

Condition: excellent (used), Year of construction: 2018, Carriage length 2,800 mm Cutting height max 140 mm Saw blade can be tilted manually Cutting width 820 mm Ca78gwoory Saw blade diameter max 400 mm Speed levels 1 Saw blade height adjustment manual Main motor 5.5 kW CE mark

more

Listing

Gizałki

8,208 km

Wide belt sander

Felder FW 950 C

€12,500

Call

working width: 950 mm, grinding height: 170 mm, Condition: as good as new (ex-display), Year of construction: 2022, FELDER wide-belt sander type FW 950 is designed for precision sanding of calibrating and finishing surfaces of solid wood components of construction carpentry, countertops, veneered panel elements, plywood and the like. It is a machine tool with high productivity and sanding accuracy. One combo unit. Quick change system for sanding belt and sanding pad. Infinitely variable feed speeds also adjustable while sanding is in progress Width 950 mm Year of manufacture - 2022 Bgu0qdhsh08 Power supply - 400 V Power - 9 kW Working width - max 950 mm Grinding height - 3-170mm Speed pos. - 2,5 - 10m/min Power of the grinding belt drive motor in the grinding unit 10,0 hp (7,5 kW) Roller extension table on both sides 200mm Space requirement of 1.6 m2 Massive feed table with material-sensitive conveyor belt Combination unit with electro-pneumatic sanding foot Quick-change system for sanding belt and sanding pad Full control through central machine control Safety (CE/CSA/UL) Excellent surface finish

more

Listing

Nattheim

(dealership location)

8,019 km

Absauganlage

Felder RL 300

Call

Condition: used, Year of construction: 2011, machine/vehicle number: 02.0.461, Absaugstutzen: 300 mm Leistung: 9,2 kW Volumenstrom: 5.090 m³/h Unterdruck: 2.100 pa Filterfläche: 40 m² Anzahl Spännetonnen: 3 Spänne Auffangvolumen: 500 L G3ng82jxbl Reststaubgehalt: < 0,1 mg/L Feuerlöscheinrichtung: Ja Gewicht: 720 kg Maße: 3.015 x 970 x 2.280 mm Lagerort: Nattheim

more

Listing

Tespe

7,725 km

Circular sawing machines

Felder Kappa 550

€10,800

Panel saw Felder Format Kappa AUTOMATIC

Call

Condition: good (used), Year of construction: 2021, Cutting length 3200 mm Cutting width 1300 mm engine power 7,35 KW Bgab7ig9bc9

more

Listing

Slampe

8,119 km

briquetting press

Felder FBP 60

€7,000

EXW Fixed price plus VAT

Call

motor power: 7,500 W, Condition: good (used), Year of construction: 2017, machine/vehicle number: FBP 60, - engine power: 7.5 kW; - productivity: 50-70 kg/h - briquette shape – 60mm (round) - machine dimensions (length x width), mm: 1750 x 1270 - machine weight – 1270 kg; Dmhrz7 - oil tank – 230 l

more

Listing

Gebhardshain

7,746 km

Thickness planer

FELDER FORMAT 4 EXACT 63

Call

Condition: excellent (used), Year of construction: 2021, Thickness planer Format 4 Exact 63 Year of manufacture 2021 Planing dimensions width 630 mm Jq380uf3it height min/max 3/300 mm feed (stepless) 5-20 m/min chip removal max. 10 mm Machine dimensions LxWxH 1225x1262x1195 mm weight 1000 kg

more

Listing

Stare Ślepce

7,967 km

Felder FORMAT Kappa AUTOMATIC KA-75.

€29,000

RL300 Industrial extractor

Call

feed length X-axis: 3,200 mm, feed length Y-axis: 3,200 mm, feed length Z-axis: 80 mm, motor power: 16,000 W, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 320 mm, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, cutting depth: 3,200 mm, feed rate X-axis: 10,000 mm/min, feed rate Y-axis: 2,500 mm/min, main saw diameter: 320 mm, total length: 600 cm, total height: 160 cm, Condition: excellent (used), Year of construction: 2016, Operating hours: 2,050 h, The machine is connected, you can check it, without intermediaries. Little used, serviced by FELDER after inspection. Year 2016. NUMBER OF HOURS WORKED 2050. Contact Poland 533447553. Cutting range 3200 x 3200 mm. 16 kW. Saw carriage guidance system: The carriage with the saw assembly runs on hardened roller guides designed for heavy loads and long service life. Saw carriage drive: Driven by a high-quality gear and rack system, which allows for high speeds. The time of individual cutting cycles is optimized thanks to fast acceleration and braking. Direct power transmission from the motor to the rack ensures smooth forward movement and excellent cutting results. Smooth regulation of cutting speed 0-100 m/min. Reverse feed 130 m/min. Automatic cutting length recognition: A laser sensor on the saw carriage detects the end of the material or board. When the cut is completed, the carriage immediately stops, the main saw and scoring disc retract under the table, and the carriage returns to its starting position. This allows you to shorten individual cutting cycles and accelerate the implementation of planned cuts. Bgckda8vjsa Saw unit engine: An efficient engine with a power of 12 HP (9 kW) allows cutting board packages and cutting solid wood. The maximum reach of the saw blade is 80 mm and allows cutting of single boards as well as packages. Thanks to the end stop, the saw blade extension height can be limited to 40 mm. The scoring unit with a 1.5 HP (1.1 kW) engine guarantees clean, tear-free cuts on coated and veneered boards. The scoring unit is raised independently of the saw blade and can be conveniently turned on and off via the control panel. Quick-mount system for main saw blade and scoring assembly: The main saw blade and scoring blade can be unscrewed and replaced quickly and conveniently thanks to the mechanical quick-clamping system. The frst feeding table: 2000 X 600mm with air cushion and roller at the end for easy material loading. The massive 2000 mm long angle stop ruler allows you to precisely position the material. Two additional tables 1500 X 600mm with air cushion and rollers at the end. 19" control console equipped with buttons for opening/closing the grippers. "Reverse material feeding beam" Thanks to this, large-format boards can be conveniently grabbed and transported on an air cushion table using the material transport beam - the operator can immediately start cutting from the control panel . The rear roller table is made of 9 double roller rails. Material feeding beam for cutting length 3200 mm. Positioning is done using a contactless system using a magnetic tape. Front feed 25 m/min, reverse feed 80 m/min. The machine is equipped with 6 single-finger plate grippers with adjustable pressing force and an opening range of 80 mm. Automatic edger: A material transfer beam moves the board behind the machine table. The board is then measured and finally prepared for edging. The operator can set the width of the cut strip using the control panel. I have a CNC, an edge bander, a panel saw, a multi-saw, a wide belt sander, 2 100 cm aggregates, and a drill. Also for sale are 3 warehouse and production halls of 2200 m2.

more

Listing

Magyarország

8,662 km

Felder RL 300

€6,500

Long belt grinding machine

Call

intake manifold diameter: 300 mm, nominal flow rate: 5,090 m³/h, Condition: like new (used), Year of construction: 2016, Used, good condition extractor fan of our sheet-cutting machine, for sale due to a machine change. Dlceot Airflow, max.: 6000 m³/h Nominal air flow: 20 m/sec, 5090 m³/h Vacuum: 2450 Pa Filter surface: 50 m² Extraction nozzle diameters: 300 mm Dust content in the workshop:

more

Listing

Egenhofen

8,104 km

Felder FS-2800

Call

Condition: used, Year of construction: 1995, Belt width: 150mm Table size: approx. 2800mm x 800mm Suction connection: 140mm Motor power: 3kW Machine length: approx. 3900mm Machine width: 1200mm Gmb0zg weight: 500kg

more

Listing

Tespe

7,725 km

Edge banding machine

Felder G300

€3,500

single sides edge banding machine

Call

Condition: good (used), Year of construction: 2008, Milling knives would need to be sharpened or replaced Bbwsorokhe

more

Listing

Barntrup

7,743 km

Felder G400

Call

Condition: excellent (used), Year of construction: 2011, Single sided edge banding machine make Felder type G 400 (MG 400-1) Year of manufacture 2011 Compact, single sided edge banding machine from joinery shop machine length approx. 2800 mm Bfr9nhcwyfy edge thickness 0,4 - 3 mm workpiece height 8 - 45 mm workpiece width min. 70 mm workpiece length min. 210 mm roller magazine gluing unit capping / impact shear contact pressing zone cutting flush and radius trimming unit radius scraper unit Manual aggregate adjustment Feed speed approx. 9 m/min. Control panel with LCD display and keypad Suction connection 120 mm Total connected load 5,5 kW Dimensions approx. 2800 x 1100 x 1550 mm (installation dimensions) weight approx. 450 kg

more

Listing

Kaunas

8,299 km

Wide belt sander

Felder FW1102

Call

Condition: used, Year of construction: 2014, Wide belt sander FELDER FW 1102. Machine is operating and test possible. Sanding height: 3 - 170 mm B0rlys3vt Sanding width: 1110 mm Sanding belt length: 1900 mm Feedrate: 3,7 - 16 m/min Units: - First unit calibrating roller - steel. - Second unit combined unit pneumatic pad with rubber roller.

more

Listing

Stare Ślepce

7,967 km

Edge banding machine

Felder FORMAT 4 Perfect 812 X Motion PLUS

€32,000

Call

Condition: excellent (used), Year of construction: 2016, Operating hours: 1,600 h, Little used machine, flagship, largest - best equipped model, serviced by FELDER, overhauled. The machine is connected, you can check how it works. Sale without an intermediary. NUMBER OF WORKING HOURS only 1600 hours. Contact in Poland 533447553 Technical data, equipment: x-motion plus control: ▪ with tiltable control panel 10.4“ ▪ unlimited memory space for defined working programs ▪ precise regulation of aggregate parameters ▪ clear symbols for aggregates and functions ▪ selection of units from the control panel ▪ motor setting of the multifunctional milling unit in the range of 1/100 mm from the control panel ▪ adhesive temperature adjustment in rest mode ▪ selection of the pressure force at the pressing unit ▪ optimization of the edge allowance on the front and back of the forms during pre-cutting ▪ clear error messages ▪ Maintenance plan, Running meters counter ▪ door security system Perfect 812 pneumatics: Plate with centrally controlled pneumatic valves. Optimized treatment system with pressure sensor. Feed 12 m/min minimum element length 140 mm Min. workpiece width 60 mm Segmented rubber pads with a quick-change system. The upper pressure beam is resistant to deformation. 2 rows of rollers evenly they press the form. Frame extendable up to 850 mm for large elements. Rotating serving plate. Feeding edges and edges: Edge roller drive ensures synchronous feed minimal edge allowances and eliminates glue contamination. The harvest thickness is controlled at the pre-milling unit electrically in the range of 0.3 -3 mm from the control panel and readable on the monitor. Pre-milling unit with 2 milling cutters motorized from the desktop. Gluing unit with a Teflon container with a capacity of 3.5 kg. Quick change system, no tools required. The glue roller ensures proper glue dosing. Pneumatically controlled pressing unit. You can choose the pressure force. The drive ensures synchronous feed of the sheets and edges, thus enabling short allowances. 2 Ball cutting unit with two independent engines tilted pneumatically from the control panel. Positionally controlled upper and lower E-Motion multifunctional milling unit for milling flush with the form and in profile: Motorized positioning in 2 axes guarantees 100% accuracy and adjustment in 1/100 mm. Profile change milling without stopping the machining process conveniently from the control panel. Aggregate pneumatically retractable. 2 corner rounding units for soft- and post-storming elements. Motor positioning of rounding cutters Suitable for processing straight edges and with a profile for post- or softforming. Polishing unit with 2 engines Bafqh0rcyi The upper and lower polisher units ensure a perfect finish on rounded edges and eliminate color differences. Cleaning agent spray in front of the polishing unit . I have a CNC, edgebander, panel saw, multi-saw, wide-belt sander, 2 100 cm aggregates, and a drill. Company liquidation. Also for sale are 3 warehouse and production halls of 2.200 m2.

more

Listing

Gheorgheni

9,026 km

sliding table saw

Felder K 500

€5,500

ONO VAT not applicable

Call

cutting width (max.): 900 mm, motor power: 4,000 W, cutting height with scoring (max.): 105 mm, table length: 2,050 mm, Condition: excellent (used), Year of construction: 2019, FELDER K 500 circular saw in very good condition, used only for cutting reeds. Bglberudjgi

more

Listing

Barneveld

7,531 km

Panelsaw

FELDER K740

€7,380

Fields clean air deduster filter new

Call

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: 425.03.671.23, Like new quality FELDER K740 with 1,300mm x-roll roller table, 800mm cutting width. Manual height and angle adjustment of the unit, angle adjustment with mechanical clock in the handwheel. Luxury top protection with integrated extraction. Table extension Equipped with a heavy 10 hp motor with star-delta Beautiful (compact) Felder 700 series rip saw in new condition! 8y3kz0cp Unique possibility. Directly available from Barneveld

more

Listing

Rottenburg am Neckar

7,957 km

Felder RL350

€8,900

FELDER EDGER 60.12 WITH RETURN

Call

Condition: excellent (used), Year of construction: 2016, Used clean air filter unit Felder RL350 The extraction unit has been checked by us and is technically fully functional. The filters have been replaced and are new, only the built-in fire extinguisher is not up to date. However, a commercially available fire extinguisher can be installed here or the built-in one can be checked by any fire extinguisher maintenance company. If you have any questions about extraction technology, piping, etc., please do not hesitate to contact us. Extraction unit RL 350 73meinoibm 3x 400V 50Hz 15PS 11kW max. volume flow: 8000 m³/h Nominal volume flow: 20 m/sec, 6920 m³/h Negative pressure: 2630 Pa filter area: 71 m² Extraction connection diameter: 350 mm Residual dust content:

more

Listing

Picassent

7,900 km

FELDER TEMPORA 60.12

Call

Condition: excellent (used), Year of construction: 2016, Felder TEMPORA 60.12 edge banding machine with return. Beni7wljgs0

more

Listing

Tylicz

8,576 km

Format Saw

Felder K 700 S

€6,500

Call

Condition: excellent (used), Year of construction: 2018, Cart length 2200mm Undercutter machine well maintained Be8j7uuw3ow

more

Listing

Wiesbaden

7,810 km

Vertical band saw

FELDER FB 640

Call

Condition: like new (used), Year of construction: 2013, Throat: 620 mm Cwgxysy8fx Table size: 600 x 885 mm Table pivotable: +/- 10 - 15° Maximum cutting width: 620 mm Cutting height max.: 400 mm Saw band length: 4730 - 4800mm Impeller Ø: 640 mm Impeller speed: 810 rpm Drive motor: 400 V, 2.2 kW Required space: 1750 x 1200 x 2150 mm Weight: 350kg

more

Listing

Rīga

8,149 km

Format Saw

Felder K 700 S

Call

Condition: used, Year of construction: 2010, Electrical motor: 4kW+ 0.55kW Saw: 315 mm Bfzic8g8qi Front saw: 100mm Slope of circular saw: 0 ÷ 45 Sawing length: 3200 mm Sawing width: 1250mm Weight: 550 kg Installment purchase possible.

more

Listing

Barneveld

7,531 km

Saw-milling

FELDER KF700SP

€15,750

Call

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: 424.07.450.21, Young used saw-milling machine Felder KF700SP Directly available from Barneveld 7.5 hp motors (2x) incl. star-delta start (automatic) H9s7s3r0ir 3,200mm X-roll roller table 1,250mm cutting width (parallel stop) Scorer with its own motor (switchable on/off) - manually adjustable Top extraction can be swiveled away Milling unit with PowerDrive F1 (electric height adjustment) Milling unit swiveling (manually 45 degrees) Milling stop with multi-adjustment system 1500mm large outrigger table Parallel stop with fine adjustment Incl. Felder F348 feeder with mounting bracket (swiveling) and gas spring Very good condition - fully serviced for delivery/collection.

more

Listing

Tylicz

8,576 km

Format Saw

Felder K940s

€10,500

Call

Condition: like new (used), Year of construction: 2019, Format saw cart 3.2 m C9ye88q Undercutter

more

Listing

Barneveld

7,531 km

Edgebandingmachine

FELDER G400

€6,995