Used Martin T54 for sale (79)

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Ncolhcjpgkmwecqrer Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Nslhcjpq If Docqrocr Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2006, Thicknesser Planing width 63 cm Year 2006 Nelhccqsv Dby Uorocr

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Machine bed: in very good condition -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x steady rests, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm Nsljwfpilshccqrjcr -Weight: 2510 kg

Condition: used, Table router MARTIN -used- finely adjustable milling fence, right/left rotation ----- Technical data ----- Table size: 1,000x930 mm, Worktable height: 860 mm, Spindle diameter: 40 mm, Useful length of milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, Nceleu R Td Nshccqrjr Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle Ø: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Condition: used, Year of construction: 1998, Spindle: non-tiltable Spindle length: 150 mm Spindle motion: 150 mm Spindle diameter: 30 mm Tool diameter max: 250 mm Fräsdorn wechselbar: Yes Werkzeugwechselsystem: Morsekegel MK 5 Ncolhccswfgv Asqrer Spindle adjustment: manually Table length: 1.180 mm Slide table: lateral Rotation speed max: 9.000 rpm Rotation speed steps: 4 2 rotational directions: Yes Power feeder: Yes Number of feeder rollers: 4 Integral stop: Yes Fine-adjustment of the stop: Yes, with display Main motor power: 5,6 kW Conformity marking: CE mark Weight: 850 kg Space requirement Length: 2,2 m Space requirement Width: 1,5 m Space requirement Height: 1,75 m

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Ncolhcov Ai N Uscqrer

Condition: used, Year of construction: 1986, Functionality: fully functional, USED, WELL-PRESERVED MARTIN T71 SLIDING CIRCULAR SAW WITHOUT PROTECTIVE HOOD FOR SALE! Nelhewfcx Teccqrocr

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price Nelhstw Hd Aoccqrscr

Condition: good (used), Code: 0264 Brand: MARTIN - GERMANY Model: T 72/A AUTOMATIK - CE Standard Ncelowdxk Ashccqror 4-axis controlled panel saw with scoring unit for cutting wood panels, furniture, customised furniture, plastics, coatings, aluminium, etc. - CE Standard Technical data: Aluminium squaring carriage length mm 3700 Max blade diameter mm 500 F30 Cutting height mm 170 Cutting width mm 1250 Motor power Kw 7,5 N° 3 speeds rpm 2800/4000/5500 Blade inclination 0-45,5° Parallelogram cross table tilting from 2 sides, with Led display Parallelogram transverse table extension 4 Controlled axis : Blade lifting - Blade tilting - Parallel guide - Reference stop 3-axis electrically controlled scoring unit Motor Kw 0,75 Blade diameter mm 120 F22 Electric adjustment guard Clamping device for small parts "BESAUMFIX" Compressed air 6-7 bar Suction base diameter 120 mm Suction guard diameter 100 mm Overall dimensions of assembled machine mm 3700 x 2100 x 1600 h Overall dimensions for transport : mm 3900 x 2200 x 1600 h Weight kg 1800

Condition: used, Thick MARTIN T 42 -used- new rubber feed roller, Rubber pull-out roller, link pressure beam, infinitely variable feed ----- Technical data ----- Planing width: 630 mm, Number of blades: 4 pieces, Passage height: 250 mm, Feed speed: 8-20 m/min, Extraction nozzle Ø: 160 mm, Njlhcsu R Tdiecqrscr weight: 870 kg

Condition: excellent (used), Year of construction: 2001, working width: 2,800 mm, a) Martin Prefeeder b) Martin DRO 1628 GT Belt feeder introduction N. 4 colors from the bottom Vacuum transport between the groups Posilock die cutting tool lockind system Vacuum Stacker Ball rotary table c) N. 1 Bobst Breaker Ball rotary table Batch turner d) Martin palletizer Ncslewdvrdehccqror Computer MPC2 Max size 1600x2800 mm.

Condition: used, Year of construction: 1985, Functionality: fully functional, machine/vehicle number: V 139200, overall weight: 1,200 kg, table length: 1,180 mm, table height: 840 mm, table width: 800 mm, MARTIN T25 Tilting Spindle Router In very good condition, everything works perfectly All bearings and guides are OK, the machine runs flawlessly Year of manufacture: 1985 A stop jaw on the router stop can be adjusted in depth, with fine adjustment and a scale, allowing planing work, e.g., with a glued profile. With spindle lock via lever 2 extraction nozzles, 125 mm on the router stop and 100 mm on the machine table 30 mm spindle, continuously electrically adjustable from -5 to 45° With right/left rotation Table opening up to 480 mm, which can be reduced using various rings Electric spindle height adjustment Very robust and durable design Optimal power transmission via V-belt drive With manual Ncslhowdvvvoccqrsr Including AIGNER integral stop jaws Including 4 Wegoma rollers, continuously adjustable feed, in mint condition Condition Machine table dimensions: 1180 + 800 mm Machine is ready for immediate use 380V, 5000 and 6000W with 2 speeds with all necessary safety features, motor brake, and emergency stop switch. The machine is approved by the German Wood Industry Association (Holz-BG) and has the GS and CE test seals. The machine weighs approximately 1200 kg Professional device

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw diameter 350mm - spindle 30mm - spindle locked - adjustable blade front/back, top/bottom - blade guard - 1.1kW engine - diameter of the exhaust port 80mm Milling machine: tenoning spindle: - spindle diameter 40mm - spindle working height 140mm - spindle locked - max. cutter diameter 350mm - 2 types of rotation speeds 3000, 4500rpm - 5.5kW engine - brake - side carriage - manual shift - dimensions of the carriage length/width 1180x600mm - angle ruler - clamps pneumatic 2pcs - diameter of exhaust nozzles 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg - very good condition - used tenoner Net price: PLN 13,900 Net price: EUR 3,250 depending on the price, EUR 4.25 (Prices may vary in the event of large fluctuations) Ncslhccqeh I N Sfjror

Year of construction: 2000, Condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Ncjlhccstxirfeqrer

Condition: used, Year of construction: 1998, Motor power: 5.5 kW Blade speed: 5000 rpm Knife block: Tersa Z4 Planing height: 2.8-250 mm Planing width: 630 mm Table length: 1260 mm Maximum clamping distance: 8 mm Extraction nozzle: 160 mm Weight: 1115 kg LxWxH: 1140x1260x1200 mm Features: Thicknessing table extension 1500x630 mm in the outlet Safety bar (for space-saving installation in conjunction with a surface planer) Glide rollers in the thicknessing table: Grooved steel feed roller and smooth steel feed roller Nelhcswc T Erocqrscr Storage location: Supplier

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, total width: 1,200 mm, total height: 1,200 mm, total length: 1,200 mm, planing width: 630 mm, overall weight: 1,100 kg, working width: 630 mm, number of planer blades: 2, 2-blade spindle with wedge bars Rubber infeed and outfeed roller Articulated pressure bar Nslhccewcn Sysqrecr Electric height adjustment with digital display 4 feed speeds Extraction nozzle diameter 160 mm

Condition: good (used), Year of construction: 2002, Robust swivel milling machine T 26, swivels from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine with very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L running Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Electrically adjustable stop, inlet jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop can be swiveled away with lifting device (for curved milling work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Foldable stop for insert milling Original Martin aluminum stop jaws with two bars Workpiece pressure device Aigner Centrex 3-roller feed HolzHer 1117, with 8 speeds, R/L running, new rollers Feed socket, can be switched from the control system Extraction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been repainted Approx. 7400 operating hours Ncjlhcjvv H T Rocqrsr Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2017, Spindle: inclinable Spindle length: 140 mm Spindle motion: 150 mm Spindle diameter: 30 mm Tool diameter max: 250 mm Fräsdorn wechselbar: Yes Werkzeugwechselsystem: ISO 40 MARTIN DornFix: Yes Spindle adjustment: electro-motive Spindle inclinable backwards: Yes Table length: 1.830 mm Ncolhjwcfzrjccqrsr Support for frames: Yes Slide table: lateral Rotation speed max: 10.000 rpm Rotation speed adjustable electrically: Yes Rotation speed steps: 6 2 rotational directions: Yes Power feeder: Yes Number of feeder rollers: 4 Control panel at top: Yes Controlled axes: 2 Integral stop: Yes Fine-adjustment of the stop: Yes, with display Main motor power: 7,5 kW Control: MARTIN TOUCH-SCREEN Conformity marking: CE mark Weight: 1.700 kg Space requirement Length: 3,1 m Space requirement Width: 1,7 m Space requirement Height: 1,95 m

Condition: good (used), Year of construction: 1976, Martin surface planer Type T 51 Planing width 510 mm 4 blade shaft Nelsvk Slnehccqrscr Slotted table lips Standard planer blades Swivelling planer stop Total table length: 2500 mm Speed of blade shaft approx. 5000 rpm Motor power approx. 5 kW Weight approx. 980 kg Dimensions approx. 2.5 x 0.7 x 1 m Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1998, Motor power: 5.5 kW Blade speed: 5000 rpm Knife block: Tersa Z4 Planing height: 2.8-250 mm Planing width: 630 mm Table length: 1260 mm Maximum clamping distance: 8 mm Extraction nozzle: 160 mm Weight: 1115 kg LxWxH: 1140x1260x1200 mm Features: Thicknessing table extension 1500x630 mm in the outlet Safety bar (for space-saving installation in conjunction with a surface planer) Glide rollers in the thicknessing table: Grooved steel feed roller and smooth steel feed roller Storage location: Supplier Nolhccqowc T Elerscr

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed Nelhoqlck Noccqrscr - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. Nolhsqlckpeccqrecr - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm Ncolhjv Erkaoccqrer T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Njlhcjt U Rn Sscqrocr Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -