Used Martin T60C for sale (74)

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, cutting width (max.): 1,000 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, height adjustment type: electric, overall weight: 1,500 kg, table length: 1,900 mm, trimming length: 3,200 mm, table height: 900 mm, slide length: 1,900 mm, table width: 400 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 6,000 rpm, input frequency: 50 Hz, motor voltage: 400 V, power: 55 kW (74.78 HP), sliding table length: 1,900 mm, sliding table width: 400 mm, Machine types: T 60 C Machine no: 53775700 Year of manufacture 2015 Lkxuyp003

Condition: excellent (used), Year of construction: 2007, I sell the format sliding table saw with scoring Manufacutrer: OTTO MARTIN Model: T60 Classic Bnwazcflitz Year 2007 Cutting length 3200mm. Cutting width 1250mm (optional) Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-46° digital Saw blade and scoring height adjustment digital Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from control panel Main motor format sliding table saw 5,5KW (7,5 HP) (4000/4800/6000 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Including full documentation and CE Certificate.

Condition: excellent (used), Year of construction: 2004, operating hours: 2,017 h, Robust swivel milling machine T 26 swivels from -45 to +45 degrees, with sliding table Tilt milling machine with very good equipment and an extremely wide range of accessories A treat for every Martin fan Pole-changing drive motor 5 / 6kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, allowing settings to be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30 mm, quick-change mandrel spindle with torque wrench Fence with lifting device can be swiveled away (for curved milling work and use of the sliding table) Calibration device for cutter height adjustment Table extension on the right with extendable workpiece support Support can be extended by 700mm Table length approx. 1830mm + 900mm sliding table on the left side Cast aluminum jaws Original Martin CPS workpiece pressure device 4-roller feed Masterwood, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Comfort stand with electrically height-adjustable feed support, which can be swiveled away to set up the machine and then simply snapped into place. Table opening via eccentric table rings, electrically adjustable High-quality sliding table, roller table for tenoning etc. Large protective cover for use with tenoning machine Czuii3Szpw Precision length stop Suction nozzle 2 x 120mm Central oil lubrication Compressed air connection 6bar Emergency stop switch Original paint, partially repaired V-belt renewed Operating hours: 2017 hours, i.e. only 25 minutes per day. Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 2000kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: new, Year of construction: 2024, Martin T 77 panel saw - new stock machine - Equipment: T 7710/1-a saw unit 1 x 46 degrees T 7725/2-a cutting height 205 mm T 7715/3-a drive power 7.5 KW infinitely variable T 7730/3-a trimming table length 3.0 m T 7735/3-a cutting width 1350 mm T 7743-a parallel stop electronically controlled and can be lowered to the end position T 7750-a electrical preparation for retrofitting a scoring unit Dqxqm2 T 7780/1-a table extension at the rear 610 x 860 mm Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 1986, Machine data Martin T 25 Table size 2400x400 mm Swivel range -5° – 45° Swivel and height adjustment (150 mm) electric Spindle diameter 30 mm Spindle rotates left and right, speeds 3000, 4500, 6000, 9000 rpm Incl. 5-roller feed 6.0 kW motor Vjue0Cwk8 Weight approx. 1000 kg

Condition: used, Table router MARTIN -used- finely adjustable milling fence, right/left rotation ----- Technical data ----- Table size: 1,000x930 mm, Worktable height: 860 mm, Spindle diameter: 40 mm, Useful length of milling spindle: 160 mm, max. cutter diameter: 255 mm, Buomys22 max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle Ø: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Condition: excellent (used), Year of construction: 2019, Martin T 53 surface planer Year of construction 1995 SUVAMATIC cutterblock guard TERSA cutterblock with 4 knives planing width approx. 500 mm Table length approx. 2840 mm Speed of the cutterhead 5000 rpm Slotted/low-noise table lips Hydraulic table adjustment Hollow point joint adjustment Digital display for chip thickness LED Digital display for hollow point joint LED Largest cutting depth rebate depth 8 mm Aigner stop Swivel 45° - with extendable bar Betyklxr Motor 5,5 kW Automatic motor brake Suction connection D 160 mm Space requirement approx. LxWxH mm 2900 x 1000 x 1200 Weight 1000 kg New replacement blades

Condition: good (used), Year of construction: 2000, working width: 2,400 mm, Roda Prefeeder Martin DRO Vacuum feeder with belts suction N. 3 bottom printing groups rubber/roller ink system Vacuum transports between the printing groups Transfer between the last group and die-cutter Rotary die-cutter with Serrapid locking system Beater/Stacker Max size 1600x2400 mm. Tmzv8Xy70 Not Installed.

Year of construction: 1965, Condition: ready for operation (used), A Martin lathe overhauled in 1990 is available. Center height: 300mm, turning diameter over bed/face slide/crank: 600mm/400mm/840mm, spindle bore: 63mm, front bearing diameter: 110mm, center point: Morse 5, speed: 1000rpm, tailstock pinol diameter: 80mm. Including coolant device, Multifix quick-change tool holder, change cassette, bed stop and 2x change wheels. Thread spindle play available. Documentation available. On-site inspection is possible. Pigssqooc

Year of construction: 1994, Condition: used, Pressure beam for Martin sliding table saw T 72 A year of construction 1994 suitable for pneumatic clamping of veneers or thin boards for 3 m sliding carriage Availability: short term Cq2Rvoykhu Storage location: Flörsheim

Condition: excellent (used), Year of construction: 1999, Robust swivel milling machine T 26, swivels from -45 to +45 degrees Swivel milling machine with very good equipment A treat for every Martin fan Reinforced drive motor 7.5 kW with automatic motor brake and stepless speed control R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Speeds continuously adjustable from 1000 - 12000 rpm via frequency controller Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and individual inlet jaw, as well as input of the milling cutter diameter, the cutting depth is automatically calculated Stop with Lifting device can be swung away (for curved milling work) Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Aigner integral stop left 500mm, right 600mm 4-roller feed HolzHer 1112, with 8 speeds, R/L running, new rollers Feed socket, switchable from the control system Comfortable stand with electrically height-adjustable feed support, this can be swung away to set up the machine and can then simply be locked in place. Suction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch K9Savrxc3 Some parts of the machine have been repainted Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: used, MARTIN T72 sliding table saw -used- tiltable, outrigger table, front table, hydraulic height adjustment, hydraulic tilt adjustment, Digital display of the swivel angle, speed display, Angle mitre fence, Narrow and wide top guard, Bsmdimb2N0A automatic brake ----- Technical data ----- Swivel range: 0-45.3 °, carriage length: 2,700 mm, Cutting length: 2,800 mm, Cutting width: 830 mm, Cutting height: 140 mm, max. saw blade Ø: 450 mm, Crosscut fence extendable up to: 3,330 mm, Speeds: 2,800/4,000/5,500 rpm, Motor power: 5.5 kW, Work table height: 880 mm, Extraction nozzle Ø: 120/80 mm, Dimensions (LxWxH): 3,000x1,600x1,500 mm

Condition: good (used), Year of construction: 1975, Martin Miniline 616 - Vacuum Feeder - Max. speed: 24.000 Sh/h - Max. size: 600x1600 mm - Year 1975/1991 - 2 Color Flexo - Slotter Dng39Z - Rotary Diecutting - Folding gluing - Counter Ejector, Year 1991

Condition: good (used), Year of construction: 1976, Martin surface planer Type T 51 Dquvrl Planing width 510 mm 4 blade shaft Slotted table lips Standard planer blades Swivelling planer stop Total table length: 2500 mm Speed of blade shaft approx. 5000 rpm Motor power approx. 5 kW Weight approx. 980 kg Dimensions approx. 2.5 x 0.7 x 1 m Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), Spindle thickness 30 mm Spindle revolutions from 3 to 12 thousand / minimum Dpmnotlog Spindle angle 0-45 degrees

Condition: used, Year of construction: 2021, Used machine Year of construction 2021 Well-maintained condition (only 10 operating hours!) Bsdcb0Mcsiw Specification of the standard version Stand modern composite stand - weight approx. 1200 - 1450 kg Table size 1255 x 900 x 95 mm, made of heavily ribbed gray cast iron gray cast iron Table height 900 mm Table openings Ø 255 / 205 / 161 / 106 / 74 mm Tools with 0 max. 250 mm (max. 150 mm with 45° spindle inclination) spindle inclination) can be lowered under the table Speeds 3000 / 4000 / 5000 / 6000 / 8000 / 10000 rpm Speed change by belt reversal/pole switching, with belt quick-tensioning device Control panel Control panel at eye level, can be swiveled away, ergonomically ergonomically inclined Control PowerPC control in industry standard, with Linux operating system and TFT touch screen user interface (216 colors); bus-controlled servo drives servo drives (CANopen) USB interface for data backup and updates MandrelFix quick-change spindle system, incl. torque wrench; for frequent mandrel changes we recommend option T2770 85-a or T2770_63F-a, steep taper SK 40; controlled height-adjustable by electric motor; electro-pneumatic locking locking device for tool and mandrel change Spindle stroke 150 mm (125 mm with motor 7.5/9.5 kW); Repeat accuracy ± 0.025 mm Milling fence Precisely guided milling fence on both sides, adjustable in One-hand operation according to digital display integrated digital display integrated in the control unit; simple and extremely precise reconstruction of the fence after working without fence; adjustment of the fence ruler (right) by handwheel by handwheel according to scale with vernier; Martin fence ruler in aluminum, Hard -Coat coated, with mounts for fillet and guide rails; total fence travel -6/+125 mm; travel of the stop ruler (right) -10/+10 mm; display resolution 0.05 mm Tool Ø max. 250 mm in the routing fence (tool with Ø max. 250 mm can be lowered under the table) max. 350 mm in slotted hood Extraction Extraction nozzle 120 mm Ø on the milling fence Extraction nozzle 120 mm diameter under table Minimum extraction air volume (sum of both extraction nozzles): 14 m3/min. at 500 - 800 Pa Maintenance device oil central lubrication (oil quantity regulator) with manually operated pump pump Standard accessories 1 milling guard 1 CPS Tapoa 08 arc milling guard (for arbors -0 30 - 50 mm) 1 milling arbor 30 x 140 mm (SK 40) 1 open-end wrench SW41 mm (SK 40) 1 torque wrench (mandrel fixing system) 1 template holder DIN A 4 1 grease gun filled with long-life grease 1 fillet board 2 Allen keys (6 and 10 mm) Electrical equipment (according to VDE 0113/EN 60204-1/prEN 848-1) Automatic star-delta start and wear-free, electric braking of the milling spindle; switchable of the milling spindle; switchable three-phase connection for feed with motor protection switch and 5-pin socket; potential-free contact for controlling the extraction system; 2 EMERGENCY STOP buttons, lockable main switch, undervoltage protection, motor protection switch and winding protection; required required power supply: 3 -, 400 V, 50 Hz. with neutral conductor Emission values

Condition: good (used), Year of construction: 1988, Functionality: fully functional, saw blade diameter: 450 mm, cutting width at rip fence: 1,050 mm, height adjustment type: hydraulic, slide length: 2,700 mm, pivoting range: 45 °, power: 5.5 kW (7.48 HP), - double-sided miter gauge LACHNER DGA 900 Dqutm7

Condition: used, Thick MARTIN T 42 -used- new rubber feed roller, Rubber pull-out roller, link pressure beam, infinitely variable feed ----- Technical data ----- Planing width: 630 mm, Bssznn2H Number of blades: 4 pieces, Passage height: 250 mm, Feed speed: 8-20 m/min, Extraction nozzle Ø: 160 mm, weight: 870 kg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Martin 924 Midline Year 1998 - Dqukj9 Prefeeder Martin, year 1998 Max.Size: 2400x900 mm Vacuum feeders 3 Flexo Print Units bottom print – Year 1998 Automatic slotter Rotary die cutting unit Folder gluer with Multi T System Glue system - Valco Counter ejector Mosca strapping machine, year 2016 Paletizer: ALLIANCE – ALFMAX Panuc Robot

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg Dmu0Q2 - immediately available -

Condition: excellent (used), Main engine power 3.4 / 4.5 kw Feed power (3 rollers) 0.7 kw spindle diameter 30mm The reach of the trolley is 170 cm Brd8Rr00 Very good condition.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. Cuo7Ny7Vim - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1990, Surface planer, Martin T 53 surface planer with 4-knife shaft Cj3Qaoxhmu planing width max. 500 mm max. chip removal 8 mm Planer thickness adjustment hydraulically with foot pedal Drive motor 5.5kW with automatic motor brake 4-knife shaft strip planer knives for resharpening planed cast iron tables slotted table lips low-noise design Pivoting fence with fold-down auxiliary fence Fried vibration protection planing shaft cover LED display Hollow-point display 160mm extraction socket CE mark Dimensions approx. 2850 x 850 x 1100mm (LxWxH) Weight approx. 1100kg. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Huyjm0S Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Dlzsmx Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -