Used Mitsubishi Motor for sale (358)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg Iodpfjri S Hksx Akwstl The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,609 h, load capacity: 3,500 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Technical condition: good Front tires type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Iedpfx Akounnuvowotl Rear tires Condition: 60 - 80% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 120 other forklift trucks of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage - rf-stapler installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Clamp fork, sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab,

Condition: ready for operation (used), Mitsubishi / Mazak FX 53A BN624A240H05 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpsi Eb E Tefx Akwjtl

Condition: ready for operation (used), Mitsubishi / Mazak FX 784B BN624A535H01 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfei Eb Hxex Akwetl

Condition: ready for operation (used), Mitsubishi BN624A471G54B / SE-CPU2 control board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itedpfei Eb Ivox Akwol

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Itodey I Uvcopfx Akwol Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,280 mm, loading space width: 2,100 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 93734_1 Itsdpfxoy Nghmo Akwel The vehicle is located at our site in 34497 KORBACH, Frankenberger Landstr. 7. Exterior * OU2 Rear tailgate bumper * OU3 AdBlue tank cover * QQ0 Trailer hitch ball head * Trailer hitch, fixed, 3.5 tons * EX5 Trailer socket 12 V, 13-pin * OT6 Battery cover * LAC Paint finish, dust grey RAL 7037 * F62 Heated rearview mirror * OS2 Scattolini three-way tipper, aluminum side walls * LH6 Protective grille for taillights * OF1 External sun visor * WP5 Tool box, plastic Interior * SH6 Driver's suspension seat with armrest * H07 Automatic climate control Multimedia * EF3 2-DIN touchscreen radio Comfort and Environment * JW0 Reversing warning system Safety * SA5 Driver airbag Condition/Documents * Demonstration vehicle Other * KA6 Cover, exhaust system * EE9 Batteries 2x 12V / 100 Ah * A86 Differential lock Other: This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted using the current daily exchange rate. The currency of the vehicle's location is valid. ----

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, I sell a forklift, - Mitsubihi FD35A Diesel year of manufacture 1996. Itedpfxoudlaaj Akwjl - The state of the counter 775 hours. - Lifting capacity 3.5T. - Mast lifts 360cm - Unladen weight 4930kg. - Full lighting. - Forklift in very good condition.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Daewoo BR16 Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Mitsubishi FB15TCA Common battery sizes available on request. Transport available. Itsdpfx Akjy Rnihewjl

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Ijdpfxeyr Niqe Akwstl Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm Itodpfey Egnxox Akwjl • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle Description Diesel forklift MITSUBISHI FD35N Year of manufacture: 2006 According to the hour meter: 13,347 hours 3.5-ton lifting capacity 2.45-meter overall height 3.70-meter lifting height 42.3 kW Mitsubishi engine - Full-view mast - Wide fork carriage - Twin tires Ijdpfoi Dnqkjx Akwjtl - Side shifter - Lighting system - Original paint - Ready for immediate use Selling price: €10,500.00 net Affordable delivery options also available!

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm Iedjnh R Nkepfx Akwetl table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 1,006 h, load capacity: 2,500 kg, lifting height: 4,750 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Technical condition: good Front tires type: Superelastic Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Itsdpfxju D Rbxj Akwol Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Sideshift, 3rd valve, front work lights,

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, The machine will remain in operation until 08/04/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 310 mm U/V-axis travel: 150 mm Max. workpiece weight: 1,500 kg Maximum workpiece dimensions: 1,050 x 820 x 305 mm Taper angle (workpiece height): 15 mm / 260 mm or 30 mm / 110 mm Table dimensions: 840 x 560 mm Possible wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,687 x 3,030 x 2,150 mm Isdpfoyzh Daox Akwetl Machine weight: 3,500 kg EQUIPMENT Hardened 3-sided table

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm Iedpfxsytkdrj Akwjtl CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG Ijdsxl A Aijpfx Akwotl

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The valid currency is that of the vehicle's location. Wheel configuration 4x2, single cab, payload 2 t, GVW up to 6 t, wheelbase 2800 mm, heated mirrors, reversing warning system, airbags for driver and passenger, radio with Bluetooth, technical maximum permissible GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be operated with a category B driving license (please observe requirements!!). Itsdox Hbp Tjpfx Akwjl

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: ----- Automatic tail lift – air conditioning – Carrier Supra 550 Suspension: Itsdpjx Dzqvsfx Akwjl Leaf suspension

Condition: used, mileage: 170,543 km, power: 110 kW (149.56 HP), first registration: 06/2013, fuel type: diesel, empty load weight: 3,650 kg, maximum load weight: 3,850 kg, overall weight: 7,500 kg, axle configuration: 4x2, wheelbase: 3,400 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, total length: 6,250 mm, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, differential lock, trailer coupling, Meiller tipper, non-binding offer – subject to change and prior sale – sale is made excluding any warranty – all information provided without guarantee! Iodpfxox Tpp Is Akwotl

Condition: used, mileage: 101,561 km, power: 107 kW (145.48 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, tail-lift, * Mitsubishi Canter Fuso 7C15 4x2 * Box body with tail lift * Air conditioning * Manual transmission * VIN: TYBFE85BH6DU00370 * Engine type: 4M5.2AR-33-69 * kW: 107 * Euro 4 * Displacement: 2977 cc * Unladen weight: 4460 kg * Payload: 2965 kg * Gross vehicle weight: 7500 kg * Wheelbase: 4200 mm * Box interior length: 6.15 m * Box interior width: 2.50 m * Box interior height: 2.50 m * Margin scheme taxation * All information provided without guarantee Tel./WhatsApp: Itodpfx Akjr Ex Dajwsl

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 * Engine type: 4M4.2A3-73-40 * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg Iodey Ng Umspfx Akwotl * Gross weight: 3500 kg * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Tel./WhatsApp:

Condition: new, Mitsubishi HC-SFS152 AC servomotor, serial number 4X090104404X + accessories, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Itjdpfxezy Tqae Akwol

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting Itedpozqu Dcjfx Akwol - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, fuel type: gas, mast type: telescopic, construction height: 2,300 mm, gearing type: automatic, fork length: 2,400 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 7.00-12, overall weight: 5,080 kg, total height: 2,300 mm, total length: 3,100 mm, total width: 1,400 mm, fuel: liquid petroleum gas (LPG), motor model: EBT-GK45-3B, Equipment: sideshift, MITSUBISHI FG 40 N – LPG forklifts TECHNICAL DATA Lifting capacity: 4.000 kg Lifting height: 3.240 mm Closed height: 2.300 mm Mast: Standard (2W324) Isdpjz Aqfyofx Akwstl Fork length: 2.400 mm Fork carriage: 3A Drive: 6-Zyl. Treibgas Engine: EBT-GK45-3B Transmission: Automatik Tyres: Superelastik 8.25-15 (70%) / 7.00-12 (60%) Service weight: 5.080 kg Length: 3.100 mm Width: 1.400 mm Year of manufacture: 2018 Operating hours: 7.068 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights ATTACHMENTS Sideshift Internal no.: 1201952 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.