Used Mwm Diesel Engine for sale (16)

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 Cedpfxeivfgfo Adrerh -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm Cjdpfx Adeivqmlsrerh -Weight: 8.7 kg

Year of construction: 1969, condition: used, Generator set, emergency generator Manufacturer: MWM – Motoren-Werke Mannheim AG Type: D208-6 (6-cylinder diesel) Engine No.: 208.6.02024 Year of manufacture: 1969 Output: 57 hp, 1500 rpm Generator Manufacturer: A. van Kaick (Generator and Engine Works, Frankfurt am Main) Type: BJB 42/45-4, self-regulating Generator No. 40719 Output: 40 kVA, 400 V, cos φ 0.8, 1500 rpm 40 kVA, 50 Hz 51026ä Crjdpfeztndzex Adreh

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, 4 units: Engine: MWM Deutz TBDG 441 BV16, dual fuel, gas, diesel, year 1993. Crodpfx Adsy Hmhbjreh Spare parts also available for sale, including turbochargers, injection pumps, cylinder heads, crankshafts, etc. 2 units: Generator: AVK 6600V 173A 50Hz, control unit.

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Loading is possible. Sale only to commercial buyers and under exclusion of any warranty. Csdpfow Aphcox Adrorh

Condition: good (used), Year of construction: 1980, Diesel emergency generator Crsdpfx Adst In Nyerjh Manufacturer: MWM Mercedes - AEG, Year: 1980, with switchgear cabinet and cooler. Diesel engine: MWM, 8 cylinders, 405 hp Operating hours: 303.7 hours Generator: AEG, Type: SIRI 100 D/4, 330 kVA.

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas Crodoz E A Rwspfx Adrjh For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Codjz D Ihfspfx Adrsrh

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Crjdpfxezudbfj Adreh Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit Crsdpjivql Iofx Adrsh -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Dimensions of generator: 4000/2220/H2170 mm -Dimensions of cooler: 2150/360/H1860 mm -Dimensions of silencer: 2230/825/H825 mm -Fan dimensions: 1385/1100/H1100 mm -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Condition: used, Year of construction: 1997, with exhaust gas heat exchanger Cedpfx Adjy Tu Ezjrorh KWe: 500 Working hours: 41000

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 Cjdpfjt S Ny Ujx Adrorh installed in container

Condition: used, Year of construction: 1994, machine/vehicle number: 628.16.010032, power: 3,600 kW (4,894.63 HP), fuel type: diesel, rotational speed (max.): 1,000 rpm, Generator: 4250 KVA, 50 HZ, 10000 V Crsdpfoxmu Rbex Adrsh

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Codpfjytq A Ujx Adrjrh Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Crsdpfovmzwxex Adrsh Generator: Piller Power: 1400 KVA Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: excellent (used), Vertical head MWM Ruhla SK 40 Pinion travel 80 mm Diameter of mounting flange 180 mm Bolt circle diameter 135 mm Four mounting holes, diameter 15 mm Diameter of centering pin 75 mm Height 500 mm Width 190 mm Depth 250 mm Codpfjzdub Iex Adrsrh Weight 50.5 kg