Used Schneider Compressor for sale (187)

Condition: used, functionality: fully functional, Equipment: refrigerant dryer, Piston compressors from Kaeser (V2-cylinder) and Schneider Airsystems including Otto Klein GmbH OKS tank with 250 litres, mounted on a custom-made frame for redundant compressed air supply (both compressors fill the tank in parallel). The system is fully functional (and still in operation), a TÜV inspection is due. The Kaeser compressor is somewhat older, and the Schneider Airsystems unit is from 2013. Connection 400 V, compressed air storage at 10 bar. ALSO: KAESER refrigeration dryer TA 8 including 2x pre-filters with flexible compressed air hose. Gsdpfxjyz U T Uj Af Esir

Year of construction: 2015, condition: used, UniMaster STS 660-10-270 - Year of manufacture: 2015 - Including oil-water separator OWS-Öwasep 1 - Including condensate drain Ecomat 3100 With soundproof enclosure, extremely quiet operation Equipped with refrigerated dryer and bypass line V-belt driven, two-stage, 2-cylinder piston compressor Fitted with rubber vibration isolation mounts for secure placement With intercooler and aftercooler Gisdpfx Afoyzc R Us Esr Easily accessible condensate drain valve Additional ports with blanking plugs for easy system expansion (except for the 90 l receiver) Air outlet 3/4" Space-saving vertical design Flexible upgrade options: retrofit soundproof enclosure (for compressors with 4 kW) and/or refrigerated dryer as required Easy and cost-effective vessel inspection through handhole opening Technical Data: Max. pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 520 l/min Drive power: 4 kW Speed: 1025 rpm Tank capacity: 270 l Weight: 170 kg Noise level: 78 dB[A] Air outlet: 3/4" internal Dimensions (W x D x H): 750 x 705 x 1800 mm Availability: short-term Location: Flörsheim

Condition: excellent (used), Compressor SCHNEIDER UNM STS 660-10-270 XDK – used – Tank with powder coating, including refrigerant dryer ----- Technical data ----- Tank capacity: 270 litres, Number of cylinders: 1, Maximum flow rate: 660 litres, Effective delivery: 520 litres, Maximum pressure: 10 bar, Motor: 4 kW, Speed: 2,895 rpm, Gisdjyyzrbopfx Af Eor Dimensions (LxWxH): 900x800x1850 mm Quality information: - thorough basic cleaning performed - electrics tested - immediately ready for operation

Condition: used, Used machine Equipment and technical specifications: - Suction capacity: 611 l/min - Delivery rate: 485 l/min (at 8 bar) - Motor: 4 kW / 400 V - Unit speed: 1437 rpm - Oil content in crankcase: 0.9 l - Max. operating pressure: 10 bar - Tank capacity: 270 l - Number of cylinders: 2 - Sound pressure level: 83 dB(A) - With refrigerant dryer DK 985 Eco: - Volume flow at pressure dew point +3°C: 600 l/min Gedpfx Afsyyfkno Eoir - Power consumption: 0.3 kW - Pressure loss: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Dimensions: 930 x 830 x 1840 mm Weight: 190 kg Availability: short-term Stock location: Hesse

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 20005261297, Schneider tradesman compressor complete system with integrated dryer mounted on steel pallet. Very good condition! Equipped with ready-to-connect star-delta switch, see picture. The dryer is mounted on the rear side of the tank! Gsdoy Atutspfx Af Ejir

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Giedpfxewlbz Tj Af Eor Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Control: Conventional - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gijdpfxox Dkggs Af Eor Lukas van Rossum

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Gisdpfsy Ah H Rex Af Eer Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: good (used), Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor, front panel, touch screen, control unit, display, operator panel, touch screen, touch panel, multi-panel, touch multi-panel -Manufacturer: Schneider Electric, Pro-face Monitor -Type: GP-4301TW -Model: PFXGP4301TADW Gjdpfsxud Dmsx Af Ejir -Number: 2 monitors available -Price: per piece -Dimensions: 170/140/H60 mm -Weight: 0.7 kg/pc.

Year of construction: 1992, condition: ready for operation (used), A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible. Gedpeyyy I Uefx Af Eeir

Year of construction: 2016, condition: used, · V-belt driven, two-stage, compressing 2-cylinder piston compressor · 15-year warranty on the tank against rust-through, thanks to internal coating · Equipped with rubber vibration dampers for secure positioning · With intercooler and aftercooler · Easily accessible condensate drain valve · Air outlet 3/4" Common features · Suitable for expanding existing compressed air systems · Flexible expansion possible by simply retrofitting a soundproofing hood (for compressors with 4 kW) Technical data Pressure: 10 bar Intake capacity: 1000 l/min Effective delivery rate: 790 l/min Drive power: 5.5 kW Speed: 995 rpm Tank volume: 10 l Weight: 158 kg Noise level: 82 dB[A] Air outlet: 3/4" internal thread Dimensions (W x D x H): 1005 x 650 x 770 mm Incl. tank Common features · Vertical tanks · Simple and cost-efficient tank inspection via handhole or corresponding inspection openings possible · 15-year warranty on the tank against rust-through, thanks to internal coating Technical data Pressure: 11 bar Tank volume: 500 l Weight: 130 kg Air outlet: G 1 Gsdpfx Afeyfp Rue Eoir Dimensions (W x D x H): 850 x 830 x 2030 mm Incl. Schneider DK 1500 Eco refrigerated dryer Location: Supplier

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at top, electric spindle lift, 30 mm spindle, electric tilting 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1100 x 1680 mm, Gjdpfsyaq U Dox Af Eeir weight 1000 kg, good condition Price ex location. Transport available at additional cost!

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg Gijdebb Tguepfx Af Esr

Year of construction: 2004, condition: used, Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Gsdpfx Aediyfrjf Eoir Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I

Condition: good (used), Year of construction: 2016, Consists of 2 machines 27078f Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Built in: 2016 Type of strapping: single in travel direction max speed for single strap: up to 30 bundles/min bundle dimensions (w x l): min ~160 x 130 mm, max ~560 x 480 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core width: 165-210 mm Equipment: hold-down device, interface to up-/downstream equipment, auto. strap feeding Over all length equipment: ~840 mm Over all width equipment: ~1250 mm Over all height equipment: ~1750 mm Input Power: ~0,5 kVA Voltage: 230 VAC, 1Ph, 50 Hz Air requirement: 2 l/cycle, 6 bar Weight: ~335 kg 27078g Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Giedpsk D Dvgjfx Af Ejr Built in: 2016 Type of strapping: single, double, multiple speed for single strap: up to 40 bundles/min speed for parallel (double) strap: up to 20 bundles/min bundle dimensions (w x l): min ~180 x 130 mm, max ~580 x 510 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 160/180/200 mm Equipment: back stop (package stop), hold-down device, interface to up-/downstream equipment Over all length equipment: ~615 mm Over all width equipment: ~1700 mm Over all height equipment: ~1900 mm Input Power: ~1,1 kVA Voltage: 400 VAC, 3Ph, N, PE, 50 Hz Air requirement: 7 l/cycle, 6 bar Weight: ~500 kg

Condition: new, - Type of strapping: single in travel direction - max speed for single strap: up to 30 bundles/min - min bundle dimensions (w x l): ~160 x 130 mm - max bundle dimensions (w x l): ~560 x 480 mm - min bundle (package) height: ~10 mm Gsdpfx Afoh Nulcs Eeir - max bundle (package) height: ~400 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: 800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: einfach / single - Strap coil dispenser - core width: 165-210 mm - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Over all length equipment: ~840 mm - Over all width equipment: ~1250 mm - Over all height equipment: ~1750 mm - Input Power: ~0,5 kVA - Voltage: 230 VAC, 1Ph, 50 Hz - Air requirement: 2 l/cycle 6 bar - Weight: ~335 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic in-line strapping in travel direction without bundle turning behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2001, condition: used, Built in 2001 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Size packaged good width single/parallel max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Gisdjc Ift Tepfx Af Eer Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table

Year of construction: 2000, condition: used, Built in 2000 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Size packaged good width max 600 mm min 180 mm Size packaged good height max 350 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter ca.450 mm Width 160/180/200 mm Gisdpfx Afec Id Hxe Eor Electric supply 400/50 V/Hz Weight 490 kg (approx.)

Year of construction: 2006, condition: good (used), Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~20 kg - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung 6 bar / ~8 l/cycle 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions Giodpfxoh Nuh Se Af Eor - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2003, condition: good (used), - Build in 2003 - Type of strapping: Einfach- & Doppelumreifung / single, double strapping - max speed for single strap: bis zu 35 Pakete/min / up to 35 bundles/min - max speed for parallel (double) strap: bis zu 17 Pakete/min / up to 35 bundles/min - min bundle (package) height: ~10 mm - max bundle (package) height: ~450 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: ~850 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: PP - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with auto. height detection - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~760 mm - Over all width equipment: ~1540 mm - Over all height equipment: ~1600 mm - Input Power: ~2 kVA - Voltage: 400 V 3Ph, 50/60 Hz - Air requirement: ~8l/cycle 6 bar Gedpfx Afeh I Dllj Ejir - Weight: ~415 kg - Optional Equipment: Can be combined with a RO-TRI in-line strapper to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible - Condition: cleaned & in working conditions - Machine available: upon request - Description: Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages.

Year of construction: 2006, condition: used, Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm Gisdpfx Aedanl Hof Eer min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.)

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES Gisdpfxsyg I Axs Af Eer – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Condition: excellent (used), Year of construction: 2014, Ref:11063 . 2014 Schneider Senator ‘S-Line’ 115H. Very low usage machine - only 320,000 cuts! High speed 115 cm guillotine with; Central stainless steel air table with blower Stainless steel air tables left & right Micro-computer programme (up to 5,700 steps) Giedpfx Ajypgt Usf Eer TFT colour monitor with soft keypad plus external programmable memory card Programme correction for print variation (linear & %) Variable pressure hydraulic clamp via display Twin hydraulic bottom knife drive giving more powerful cutting and less wear Illuminated cutting area 2 high speed steel knives I.R. light beam guarding with ‘FFM’ (UK HSE spec) Central lubrication Auto knife change from the front of the machine Including tools & manuals. Specification: Cutting width, Max: 115 cm Feed depth, Max: 115 cm Clamp opening, Max: 17 cm Side table width, Max: 43.6 cm Smallest cut (auto) : 35 mm/ 1.38” (manual) : 25 mm/ 0.98”_ Power required : 7.5 kW Clamp pressure : 300 – 3,700 daN

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Designed for all window tooling systems up to 400 mm tool diameter - The machine can be stopped in just a few seconds thanks to the standard braking systems (foot brake for slot spindle, automatic electronic safety brake for saw) - The protective covers for the slot spindle and crosscut saw are designed to allow easy and straightforward tool changes without having to remove the covers themselves - The crosscut saw can be conveniently adjusted from the operator's position using a quick adjustment feature. A six-position turret head allows for rapid changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height using an ergonomically positioned handwheel with 0.1 mm graduations - The robust roller table, combined with hardened and ground guides, can be easily moved with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction port: 120 mm - Crosscut saw motor: 2.2 kW Giodpfsxymfdsx Af Eor - Crosscut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo-LAS fence Weight: approx. 600 kg Availability: short term Location: Röllbach

Condition: good (used), PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control Modicon -Output module: Type: Modicon TM3DQ16T 1 pc. -Input module: Modicon TM3AI8 3 pcs. -Trigger module: Modicon TMAQ4 2 pcs. -Shipping/Price: complete Gjdpexn Nm Hefx Af Eeir -Dimensions total: 150/90/H90 mm -Weight: 0.7 kg