Used Shinohara Offset Printing Machine for sale (12)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Gtjdpfxsw R Enms Ac Ajt Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES Gsdpetvmrbofx Ac Aott 20 SPARE CYLINDERS. PRINTING 4600000

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. Gtodpov Nwgnjfx Ac Aet For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. Gedpfx Ajtvmq Nsc Aott WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Gtedetyqhqjpfx Ac Ast

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Gtsdpfjv Nv Svsx Ac Aet Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: good (used), Year of construction: 2013, 4-color "straight" offset machine with layer stack explanation, autoplate, cocking and CIP3 ink bin and remote control Gjdpfx Acetyqhke Aott

Condition: used, Technical specifications: 1. Model: Shinohara SR-2 CNC 3-Axis Machine Country of origin: Japan 2. Control system: Siemens 808D (brand new, year of manufacture 2023) 3. Cutting length (rack): max. 1500 mm 4. Cutting width (rack): max. 250 mm Gjdpfxsx Nf Ewe Ac Aott 5. Max. module: 8 module 6. Max. helix angle for cutting: 30 degrees PA 7. Diameter of milling spindle: 31.75 mm 8. Cutter diameter: 100–130 mm 9. Max. cutter width: 60 mm - Brand new hydraulics and CNC systems. - Gib and worm backlash adjustments have been carried out. - Replacement of defective bearings and elimination of oil leaks. - Complete recertification to ISO alignment standards for CNC rack milling machines. - Upgrade to three-axis CNC control with Siemens 808D, digital drives, and AC servo motors. - Replacement of old Japanese controls with Siemens technology. - No change gearbox required thanks to CNC capabilities, based on Sykes know-how and the expertise of an English company. - Realignment to the Siemens 808 Advanced System in compliance with Shinohara company standards. CNC capabilities: - Can cut both straight and helical racks. - Helix angle is visible in the DRO system in addition to CNC controls. Advantages of the CNC retrofit: - Precision and repeatability when milling racks. - Increased flexibility thanks to three-axis control. - Efficient production due to elimination of gear changes. - State-of-the-art Siemens technology.

Condition: used, Year of construction: 1988, machine/vehicle number: 1001871, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Shinohara Fuji 52 N+PYear 1988 - Serial-No. 1001871 Size min. 105 x 148mm - Size max. 360 x 520mm Paperweight 0.04 - 0.4 mms Dampening system conventionel Plus Version Gjdpeh Aw T Uefx Ac Aott Numbering and Perforation Unit Powderspray Quick clamp plate change Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, Format: 370 x 520 mm Gtsdpfx Aoxxlxmsc Aot Equipment: Two colours Straight machine machine Alcohol dampening Semi autoplate very clean press

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, color channels: 2, paper weight (min.): 28 g/m², paper weight (max.): 400 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, Equipment: documentation/manual, For Sale: 2 x Shinohara 52 – 2-Color Offset Printing Presses We are offering two Shinohara 52 two-color offset printing presses in good working condition. Both presses are currently in daily operation and are ready for immediate use. They can be purchased individually or as a pair, with preference given to a combined sale. Specifications (per press): Brand/Model: Shinohara 52-2 Number of colors: 2 Maximum sheet size: 520 x 360 mm Minimum sheet size: approx. 100 x 150 mm Gtsdpfjw Tlhlox Ac Aot Paper thickness: 0.04 – 0.6 mm Printing speed: up to approx. 10,000 sheets per hour Drive: automatic, with register control and dampening/inking system Condition: well maintained, still in daily production Additional Information: - Regularly serviced and carefully maintained - Fully operational and ready for production - Ideal for short-run jobs, fast and efficient in 2 colors Both machines to be transferred in a single transaction

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Gtsdpfxowahvae Ac Ast Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4