Used Millutensil Spotting Press for sale (11)

Condition: excellent (used), Year of construction: 2010, Technical data: Pressing force: 30 tons Distance between columns: 1090 mm Installation height: 920 mm Table dimensions: 900 x 850 mm Ram stroke: 320 mm Working speed: 6 mm/min CE marking Dimensions (width x depth x height): approx. 2500 x 2200 x 2550 mm Weight: approx. 4 tons Ksdpfx Aozlbzkoh Asdp Condition: very good condition, little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Smallest opening:165 Kdjdpfx Ahjufufbs Ajp dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Kedpfx Ahswpkv Io Ajdp Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 2006, Table size 3500 x 2500 mm Siemens Simatic OP7 controller Max. work load 80 Ton New price 1 Mil EUR Working force up to 250 Bar Power 30 kW Distance between column:3700mm Hight under roof: 2650mm Table Length: 3500mm Ram stroke: 2100mm Approche speed: 80mm/min. Working speed: 8mm/min. Return speed: 50mm/min. Length: 7800mm Kjdjxam Sdspfx Ah Aodp Width: 5500mm Height: 6510mm Weight: 135000kg

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Kdodjrr Ui Rjpfx Ah Aep Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, total height: 5,750 mm, clearance between the columns: 3,200 mm, installation height: 6,800 mm, total width: 2,890 mm, total length: 8,500 mm, table width: 2,000 mm, table length: 3,000 mm, table load: 70,000 kg, reverse speed: 50 mm/s, clamping force: 3,000 kN, Millutensil Spotting Press MIL 303 Short Description Year of manufacture: 2012 Kedpfx Aheygkwxe Aodp • Hydraulic press type 303.011 • 300 t pressing force • Usable table length: 3000 mm • Usable table width: 2000 mm • Max. distance between columns (lengthwise): 2130 mm • Max. distance between columns (widthwise): 3200 mm • T-slots in the tables: 28 mm (DIN 650) • Max. opening force: 800 kN – Max. closing force: 3000 kN • Upper table rotation: 100–180 degrees • Hydraulic pressure, adjustable from 0–240 bar • Approach speed (fast): 65–80 mm/sec • Working speed: 8 mm/sec • Return speed: 35–50 mm/sec • Main upper motor power: 30 kW • Upper auxiliary motor power: 1.1 kW • Total press power: 31.1 kW • Max. load on upper table: 30,000 kg • Max. load on lower table: 70,000 kg

Condition: used, _____ Description: Year of manuf. : 2022 Kdsdpfxjwx T Ufs Ah Aep In Generel: Table dimensions:1,500 x 1,000 mm Max. clamping force:500 kN Max. load capacity top plate:2,500 kg Max. load capacity under plate:7,000 kg RG version:plate can be pulled out and tilted :

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Kdsdpfxsx D Rlio Ah Aep Additional information • Axis Travel: Pressing axis: 1 (vertical) • Maximum Pressure: 163 tons • Table / Bed Dimensions: Length 2000 mm / Width 1200 mm • Maximum Load Capacity: 5000 kg • Machine Weight: 6000 kg • Applications: Mold adjustment and testing, injection molding, die casting, rubber molding

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Kedpfxou A T Hzo Ah Asdp Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Kjdpsyt Eldofx Ah Ajdp Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: like new (used), Year of construction: 2012, Millutensile AE6020 100, year 2012 , width 100 mm, max thickness 3 mm, speed 120 m/min, Kdodpfx Ahexbq Sqs Ajp including spray lubrication unit. + uncoiler SM400, year 2012, max load 400 kg, max width 200 mm, motorised