Horizontal lathes Gurutzpe SUPER-BT 1300x4000

Gurutzpe

Condition: used, functionality: fully functional, Lathe Make: GURUTZPE Type: SUPER RT / APL Nwjdpfjzwxdtsx Ahbek Spindle bore: ø540 mm (21") Maximum diameter above the bed: ø1200 mm Distance between centers: 3000 mm

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Nodpfx Aeu Nc Rijhbowk Reference tool SK40 Milling head SEMPUCO *

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Njdpfxjztz Hce Ahbowk

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Nwedpfx Aoztz A Rshbsk

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Nwedpfxsxga Tno Ahbok

Condition: used, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 600 mm, Manufacturer: Gurutzpe Njdpfx Aowtwqaehbjwk Model: Super M 300 Admissible dimensions: Distance between centers: 3,000 mm Diameter over bed: 600 mm Diameter over carriage: 360 mm Diameter over gap: 780 mm Bed width: 415 mm Spindle bore: 72 mm Speeds: 18 speeds available: from 16 to 1,000 rpm Motor: Power: 10 HP Equipment: Fagor digital readout Quick-change toolpost 4-jaw self-centering and adjustable chuck Steady rest General condition: Lathe in good condition

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Nsdpfx Ahjwd D Itjbowk

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Nwodpfsxfka Nox Ahbek Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Njdpfx Ahsv Rm Iwjbswk

Condition: new, Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 110 mm, turning diameter: 1,300 mm, center height in crank: 710 mm, center width: 890 mm, turning length: 6,000 mm, total length: 11,920 mm, total width: 3,600 mm, total height: 2,760 mm, spindle speed (max.): 1,000 rpm, CNC LATHE GURUTZPE GL 13 (BRAND NEW) TECHNICAL SPECIFICATIONS CNC lathe GURUTZPE Model GL13.10.6 CNC FAGOR 8065 Distance between centers: 710 mm Maximum turning diameter over carriage: 1000 mm Maximum turning diameter over bed: 1300 mm Distance between centers: 6000 mm Maximum load between centers without steady rest: 10 tons Automatic turret, 4 positions – Baruffaldi 265 Nwsdpozqfi Nofx Ahbok Manual chuck: 800 mm X-axis travel: 675 mm Z-axis travel: 6000 mm Bar capacity: 110 mm Spindle speed: 0-250 / 0-1000 rpm Main motor power: 28 / 34 Kw Rapid traverse: X-Y-Z: 8000 mm/min Footprint dimensions: 11920 x 3600 x 2760 mm Approximate total weight: 17,000 kgs PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST.

Condition: good (used), Year of construction: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Nodpfx Ahsfli Afsbjwk Travel ranges x-y-z: 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Spindle mount: SK 50 Quill stroke: 80 mm Feeds for x and y axes: 16 to 800 mm/min Feed for z axis: 5 to 250 mm/min Power: 8 kW Accessories/Equipment: Head swivels Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Nwedpfx Aoq R Rknshbsk

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Nodpfx Aozmp Axohbjwk

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,250 mm, table load: 6,300 kg, spindle diameter: 120 mm, spindle speed (min.): 2,000 rpm, quill travel distance: 600 mm, quill stroke: 600 mm, quill diameter: 120 mm, Control: Wotan 1500 Dialog, SK50 DIN 69871, complete documentation available, table size 1600 x 1250, T-slot width 22 H7, Heidenhain linear scales/measurement systems, Siemens feed drive. Nodpjyxwwwjfx Ahbjwk

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 76 mm, turning diameter: 800 mm, GURUTZPE Super AT 400/5000 lathe, with a 5,000 mm + 1,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tool rest, 76.5 mm spindle bore, 24 speeds from 9-500 rpm. It has a fixed steady rest and is equipped with a 3-jaw universal chuck with a diameter of 400 mm. It also comes with a separate 4-jaw independent chuck with a diameter of 600 mm. Overall, it is in good condition. Nedpezmp Afjfx Ahbowk