Used Gurutzpe Super A 400/6000 for sale (80,458)

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Lodpfxev Rm Iwe Acfeaf

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Laedewd D Itepfx Acfef

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 72 mm, turning diameter: 820 mm, turning length: 2,000 mm, GURUTZPE lathe, Super AT 400/2000 model, with a 2,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tailstock, 140 mm spindle bore, and 24 speeds ranging from 9-500 rpm. It is equipped with a fixed steady rest and has a 3-jaw chuck with a 00 mm diameter mounted on it. Lajdpszbz Ansfx Acfjf

Condition: good (used), functionality: fully functional, spindle bore: 76 mm, turning diameter: 1,020 mm, GURUTZPE lathe model Super AT 500/4000, with Fagor dimension display, 4,000 mm between points, turning on bed 1020 mm, on carriage 740 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed steady and mobile, assembled universal 3-claw chuck diameter 500mm, has 4 independent claws chuck diameter 900mm, several additional tools, very good condition in general Lsdpfx Acet I Ubiofoaf

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Laedpsiqyv Iefx Acfef

Condition: good (used), GURUTZPE second hand lathe Brand: GURUTZPE Model: Super-A 3000/500 No.: 232 Distance between points: 3000mm Cane pitch: 325mm Center height: 500mm Maximum turning diameter: 1400mm Maximum diameter on bench: 1000mm Maximum diameter over trolley: 740mm Speeds: 16 Visualizer: FAGOR Model: NV 300T It includes: Lodpfoh Ryfhox Acfeaf - Dish - Lunettes

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Lasdszmp Axjpfx Acfsf

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 76 mm, turning diameter: 800 mm, GURUTZPE Super AT 400/5000 lathe, with a 5,000 mm + 1,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tool rest, 76.5 mm spindle bore, 24 speeds from 9-500 rpm. It has a fixed steady rest and is equipped with a 3-jaw universal chuck with a diameter of 400 mm. It also comes with a separate 4-jaw independent chuck with a diameter of 600 mm. Overall, it is in good condition. Lasdpfxezmp Afj Acfof

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 880 mm, spindle bore: 360 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,600 mm, Gurutzpe Super RT-API Lathe Description Manufacturer: Gurutzpe Model: Super RT-API Machine type: Parallel lathe with automatic threading, ideal for oilfield and hydraulic companies Main capacities: Center height: 650 mm Ljdpfx Aoxacn Iscfoaf Distance between centers: 8000 mm Swing over bed: 1300 mm Swing over cross slide: 880 mm Swing over gap: 1600 mm Gap length from spindle nose: 410 mm Travels: Cross slide: 670 mm Toolpost slide: 200 mm Spindle: Spindle bore: Ø 360 mm Speeds: 24 (7–400 rpm) Leadscrew diameter: Ø 60 mm Automatic threading: 61 metric threads 81 Whitworth threads 47 modular threads 52 diameter pitch Automatic threading: 34 metric, 54 Whitworth, 20 modular, 27 pitch Feeds: Carriage with rapid traverses Main motor: Power: 25 HP Included components: 2 fixed steadies + 1 movable steady Front 4-jaw independent chuck Ø 800 mm Rear 4-jaw independent chuck Ø 800 mm Extra 4-jaw independent chuck Ø 1000 mm Quick-change toolpost FAGOR DRO Safety protections Other details: Machine weight: 12,500 kg + accessories Condition: Semi-new

Condition: used, Year of construction: 2023, Drive PreTeC mulch coulter hydr. coulter pressure system SmartForce Distributor head f. / front hopper ISOBUS machine control Front-mounted hopper FTender 2200 / hopper cover filling auger FTender 1-fold conveyor line self-sufficient / ISOBUS machine control Ledpfx Ajtp Hmrecfoaf

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 Lasdpfxsx Iriao Acfsf - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Four-jaw chuck, Three-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Lodpfx Ajyw T Ipscfjaf Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Laedpsztz Hcofx Acfjf

Condition: used, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 600 mm, Manufacturer: Gurutzpe Model: Super M 300 Laodpfx Acewtwqaefjf Admissible dimensions: Distance between centers: 3,000 mm Diameter over bed: 600 mm Diameter over carriage: 360 mm Diameter over gap: 780 mm Bed width: 415 mm Spindle bore: 72 mm Speeds: 18 speeds available: from 16 to 1,000 rpm Motor: Power: 10 HP Equipment: Fagor digital readout Quick-change toolpost 4-jaw self-centering and adjustable chuck Steady rest General condition: Lathe in good condition

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Lsdpfezr Ht Ejx Acfsaf Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Lasdpfxeq R Rknj Acfof

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Lodpfx Acjtvcucjfjaf

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift Ledpfezf I Drjx Acfeaf We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: used, maximum load weight: 27,210 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2016, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, DRACO MEGA AIR CARGO ROLLER BED TRAILER, THERMO KING SLXe 400, 303 CM INSIDE HEIGHT Body: Reefer, Air Cargo, Mega Chassis make and model: Draco TMS 339 First registration: 06/2016 MOT: 06/2026. Will be supplied with a new one. Dimensions (L x W x H): 1341 x 250 x 303 cm Tare weight: 11,790 kg Payload capacity: 27,210 kg Gross Vehicle Weight (GVW): 39,000 kg Refrigeration: Thermo King SLXe 400. Diesel and electric. Total operating hours (diesel + electric): 10,952 hours Suspension: Air suspension Lift axle: Yes, axle 1 Axle configuration: Number of axles: 3 Axle manufacturer: BPW axles with drum brakes Tire size: 245-70-17.5 Rear axle 1: Tread depth (outside, left): 30%, Tread depth (outside, right): 30% Rear axle 2: Tread depth (outside, left): 40%, Tread depth (outside, right): 40% Rear axle 3: Tread depth (outside, left): 30%, Tread depth (outside, right): 30% Lsdpfx Acjzv A Rusfsaf Extras: Joloda Air Cargo roller bed system, Thermo King SLXe 400 refrigeration unit, diesel and electric, temperature range from -29 to +30 degrees, cargo space width: 278 cm, 1x horizontal load securing rail, 1x lift axle, 9-tonne BPW axles with drum brakes, approved for long and heavy load transport (LZV), drawbar for trailer (without coupling). NICE AIR FREIGHT REEFEE TRUCK Optically and technically in very good condition. READY FOR IMMEDIATE USE. Further information: * Type | First axle: Goodyear R * Tire size | First axle: 245/70 R17.5 * Tire tread depth (inside, left) | First axle: 30% * Tire tread depth (inside, right) | First axle: 30% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tire size | Second axle: 245/70 R17.5 * Tire size | Third axle: 245/70 R17.5 * Tire tread depth (inside, left) | Second axle: 30% * Tire tread depth (inside, left) | Third axle: 30% * Tire tread depth (inside, right) | Second axle: 30% * Tire tread depth (inside, right) | Third axle: 30% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Website * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: excellent (used), power: 78 kW (106.05 HP), fuel type: diesel, fuel tank capacity: 120 l, color: other, lifting height: 3,350 mm, Year of construction: 2023, operating hours: 1,168 h, Equipment: air conditioning, Number of cylinders: 4 GVW: 5.643 kg Dimensions (LxBxH): 390 x 203 x 211 cm Engine type: Bobcat DM03VA Working width: 203 cm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - FOPS cabin protection - Forestry protection kit - High Flow - Hydraulic quick coupler - Radio Bluetooth - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Ledjzbi Sqjpfx Acfeaf Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: USA Superflow, Hydraulic quick coupler, 2 speed, Large display, Air conditioning, Forestry protection kit (*Without protectional cab door)

Condition: ready for operation (used), Year of construction: 1991, A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible. Laedpfx Aey Ndgtecfef

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Laedpfxof Ncadj Acfsf Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: good (used), functionality: fully functional, machine/vehicle number: YS2R4X20005774893, mileage: 71,660 km, power: 368 kW (500.34 HP), first registration: 05/2025, fuel type: diesel, empty load weight: 8,390 kg, maximum load weight: 9,610 kg, overall weight: 18,000 kg, tire size: 385/55 + 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 06/2027, fuel: diesel, fuel tank capacity: 1,100 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, blind spot assist, central locking, cruise control, differential lock, electronic stability program (ESP), fridge, lane keeping assist, navigation system, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, tire pressure monitoring, traction control, our vehicle number #30968 Cab CR 20 H Euro VI 500 hp 4x2 Wheelbase 3,750 mm Lsdszr Nc Aopfx Acfsaf Retarder BL (presumably, a specific brand or type – needs further context) Tire size 385/55 + 315/70 R 22.5 Tank capacity 615 liters + 485 liters Color Ivory White Saddle height 1,180 mm Differential lock Transmission Opticruise Hydraulic tipping system Hyva, double Air conditioning Auxiliary drive Disc brakes Auxiliary heater Cruise control Traction control Auxiliary air conditioning 2 bunks Air-suspension driver's seat/heated Refrigerator Infotainment system DAB Navigation system Rear view camera ACC adaptive cruise control AEB collision warning Front detection Blind spot assist Lane change assist Hill start assist ESP Cab air-suspended Full spoiler DPF Central locking with remote key Fog lights Automatic window wipers Full LED lighting Headlight cleaning system LED daytime running lights Cornering lights Automatic low beam Skylights Leather multi-function steering wheel Onboard computer Sun visor Radio DAB Rain sensor Rear axle load display Eco-Roll Tire pressure monitoring system Electric sunroof Electric windows, 2-way Electric mirrors/heated Electric sunblind Roller blind, left side Apple Car Play Financing possible upon request!!!

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Ledpfx Aozrwfrecfoaf Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, control type: CNC control, actuation type: pneumatic, rotational speed (max.): 3,000 rpm, overall weight: 640 kg, Equipment: CE marking, documentation/manual, The MACC TA 400 A CNC is an automatic circular saw designed for cutting aluminium and non-ferrous materials in industrial serial production. Main Technical Data Parameter Value Machine Type Automatic CNC circular saw for aluminium Blade Diameter Ø 400 mm Blade Bore 32 mm Motor Power 2.2 kW Power Supply 3 × 400 V Blade Speed 3000 rpm Vice Opening 180 mm Ljdpsy Uvqzefx Acfsaf Cooling System Emulsion cooling system Clamping System 2 pneumatic vices Weight Approx. 510–640 kg Machine Dimensions Approx. 3450 × 1700 × 1420 mm Cutting Capacities at 90° Profile Type Capacity Solid Round Material 60 mm Tube / Round Profile 140 mm Square Profile 110 × 110 mm Rectangular Profile 180 × 100 mm