Aeroplex Fluidized Bed Opposed Jet Mill 400

Hosokawa Alpine 400 AFG

Year of construction: 1976, condition: ready for operation (used), Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible. Fjdpfsyarrkjx Akhspk

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. Fodszc I Igepfx Akhjpk The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley Fpsdpfx Akex R Avvshok  

Year of construction: 1996, operating hours: 25,000 h, condition: good (used), functionality: fully functional, single-screw extruder, 90 Reifenhauser, complete with electrical panel and 200 kW motor. Fpodpfezbh Ahjx Akhek The machine is in excellent condition.

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Fedpfxjxpx Agj Akhspk

Condition: reconditioned (used), For sale is a Neuman & Esser ICM 48 mill. Fpedey Tvdlspfx Akhek The mill has been completely overhauled. Accessories can be included if required.

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Fpjdpfx Akszn Um Eehsk Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Year: 1989 Fsdpfxozktrro Akhepk 110 kW motor

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Fjdpozi N Dhsfx Akhopk Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Fodpfx Akjyyy Nxjhspk