Board stacker

KALLFASS

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Kdsdozpgh Depfx Ag Asu Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kdjdpezpghwsfx Ag Asu Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Kdsdpfoz Hwuaex Ag Aeu Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / Product length min. 80mm Arbeitshöhe (einstellbar) / Working height (adjustable) 780 mm – 930 mm Geschwindigkeit des Transportbandes / Speed of transport conveyor, fix: 20 m/min Folie: Halbrundfolie / Film centre-folded film, approx. 12 – 80micron Folienrolle, Kerndurchmesser / Außendurchmesser / Film roll, core diameter / outer diameter approx. 76 mm - max. 400 mm Breite der Folienrolle / Width of film reel max. 600mm Stromversorgung / Power supply 400 volts, 3-phase, 50 Hz, with protective earth conductor Nennkapazität / Rated capacity 3.5 kVA Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Ksdpfx Aou Nu Hieg Ajdu Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: ready for operation (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: M09.01.031, total length: 1,950 mm, total height: 1,950 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 360 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 450 mm, passage height: 120 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, Fully automatic side sealing machine UNIVERSA 400 NT Used machine; year of manufacture 2001 In good working and visual condition Description: Fully automatic flow wrapping machine for packaging products – regardless of their length – with full enclosure and without film overlap. The maximum output is approximately 40 cycles/minute. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is performed by a horizontally scanning light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped in film, it is cross-sealed using a continuously heated sealing system. The longitudinal seal is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film winder. Suitable for all common half-tube films from approximately 12 - 80 µm, e.g. polyethylene or polyolefin films such as Clysar®, Cryovac® or others. Extensive standard equipment: • Film roll placed with motorized film unwinding • Product feeding control via light barriers • Conveyor belts with infinitely variable speed control via frequency converter • Conveyor belts at the sealing die transition with knife edges Kdedsz Eguajpfx Ag Aou • Infeed conveyor belt can be extended for easy and quick threading of the film • Continuously heated sealing die with replaceable sealing bar in various profile shapes to achieve optimal seals depending on the product and film • Electro-mechanical sealing die drive • Continuous side sealing • Motorized film transport with automatic film end winding • Memory-programmable controller • Operator panel integrated in the front frame • Operator guidance and error diagnosis via multilingual text display (German, English, French) including integrated package data memory • Adjustable working height Machine design in accordance with the EC Machinery Directive 89/392/EEC (CE marking), according to VDE guidelines and in accordance with the relevant accident prevention regulations. Available optional equipment: • Film perforation unit with precision needle roller, with 3 rows of needles • Film absence detection • Film end detection Technical data: Length of cross sealing die: 450 mm Min. product length: 80 mm Film: Half-tube or flat film, approx. 12 - 80 µm Film roll holder: Arranged close to the floor for easy loading Film roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film width: max. 600 mm Working height: 780 - 930 mm Conveyor belt speed, variable: 10 - 35 m/min. via frequency converter Sealing system: Sealing die continuously heated with replaceable sealing bar, completely odorless operation, temperature control and monitoring via PLC Sealing die clearance height: max. 150 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kW Rated current (at 400 V): 5.0 A Switchgear cabinet position: on the right in the direction of operation Paint finish: Kallfass anthracite

Condition: ready for operation (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: M09.01.031, total length: 1,950 mm, total height: 1,500 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 360 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 450 mm, passage height: 120 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, Fully automatic side sealing machine UNIVERSA 400 NT Used machine; year of manufacture 2001 In good working and visual condition Description: Fully automatic flow wrapping machine for packaging products – regardless of their length – with full enclosure and without film overlap. The maximum output is approximately 40 cycles/minute. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is performed by a horizontally scanning light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped in film, it is cross-sealed using a continuously heated sealing system. The longitudinal seal is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film winder. Suitable for all common half-tube films from approximately 12 - 80 µm, e.g. polyethylene or polyolefin films such as Clysar®, Cryovac® or others. Extensive standard equipment: • Film roll placed with motorized film unwinding • Product feeding control via light barriers • Conveyor belts with infinitely variable speed control via frequency converter • Conveyor belts at the sealing die transition with knife edges • Infeed conveyor belt can be extended for easy and quick threading of the film • Continuously heated sealing die with replaceable sealing bar in various profile shapes to achieve optimal seals depending on the product and film • Electro-mechanical sealing die drive • Continuous side sealing • Motorized film transport with automatic film end winding • Memory-programmable controller • Operator panel integrated in the front frame • Operator guidance and error diagnosis via multilingual text display (German, English, French) including integrated package data memory • Adjustable working height Machine design in accordance with the EC Machinery Directive 89/392/EEC (CE marking), according to VDE guidelines and in accordance with the relevant accident prevention regulations. Available optional equipment: • Film perforation unit with precision needle roller, with 3 rows of needles • Film absence detection • Film end detection Technical data: Length of cross sealing die: 450 mm Min. product length: 80 mm Film: Half-tube or flat film, approx. 12 - 80 µm Film roll holder: Arranged close to the floor for easy loading Film roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film width: max. 600 mm Working height: 780 - 930 mm Conveyor belt speed, variable: 10 - 35 m/min. via frequency converter Sealing system: Sealing die continuously heated with replaceable sealing bar, completely odorless operation, temperature control and monitoring via PLC Kjdpfxjz Egn Ho Ag Aedu Sealing die clearance height: max. 150 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kW Rated current (at 400 V): 5.0 A Switchgear cabinet position: on the right in the direction of operation Paint finish: Kallfass anthracite

Condition: used, Year of construction: 2017, functionality: unexamined, total length: 3,500 mm, total height: 1,500 mm, total width: 1,700 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 500 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 550 mm, passage height: 200 mm, overall weight: 1,500 kg, power: 3 kW (4.08 HP), film width: 600 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 500 servo Ksdpfoz D S Ebsx Ag Ajdu Year of manufacture: 2016, installation: 2017 Further details available upon request. See also the images in the attachment. 1 Kallfass Universa 500 Servo, 2017 1 Kallfass Shrink Tunnel Compact 650DD, 2017 1 Kallfass Conveyor Table 1 Outfeed conveyor after the shrink tunnel

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Kdedsq Htfnepfx Ag Aou Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1045, We are offering a Kallfass block saw for sale. It was in operation until recently and has now been dismantled a few weeks ago. Kedpfx Asz A Tp Sjg Asdu Please refer to the pictures for details on its condition, etc. If you have any questions, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapping Machine KC 8060/650 Universal Year of manufacture: 2002 Dimensions: approx. 3550 x 1350 x 1450 mm (L x W x H) Weight: approx. net 690 kg / gross 790 kg Technical data: Welding frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with a Teflon-coated separating welding wire for absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure precise adherence to the set welding time and for trouble-free separating welding, even with thick films. Inspection and demonstrations are possible by arrangement at our premises. Kedpfx Agez A Dghj Asdu Functional guarantee, no warranty.