Shrinking equipment

KALLFASS universa 8060 /standard650n

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Prjdpfx Aiem Nb Rij Tjc >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet Prodpfxev Tm Ays Ai Tjc + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Prsdoxnb Uvopfx Ai Toc Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: like new (used), Year of construction: 2006, machine/vehicle number: 184620, Control: Mazatrol 640 Nexus X-way: 560 mm Y-way: 410 mm Cdnxm9qiuu Prodpfx Aekn Dxqji Tsc Z-way: 510 mm Table size: 900x410 mm Spindle cone: Sk40 Tool changer: 30 pl. Spindle speed: 12000 1/min IKZ: 15 bar Chip conveyour Machine weight: 5010 kg

Condition: used, Year of construction: 2016, CNC machining center Holzher Evolution 7405 for sale, year 2016, in excellent condition, located in Serbia. This high-performance machine is designed for precise processing of furniture components and other wooden materials, making it ideal for professional workshops and production. Technical specifications: Model: Holzher Evolution 7405 Year: 2016 Type: CNC machining center for wood Podpfjyyxutsx Ai Tjrc Condition: Excellent, regularly maintained Location: Serbia Advantages and description: Multi-axis precision machining of components High productivity and reliability Suitable for the professional furniture industry Easy operation and programming

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Prsdey Dqx Sopfx Ai Tjc Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, color channels: 6, number of print heads: 24, resolution (max.): 1,000 dpi, paper width (max.): 3,200 mm, The printer is in excellent condition, until a few months ago it was under a Durst contract. Configuration is CMYK lc lm, heads and everything else is in perfect working condition, printing is excellent even in the fastest modes. The machine works great and very reliable. Rip Grand Caldera comes with the machine. It can be viewed and tested at any time Predoxv Dx Hepfx Ai Tsc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 0820.0545, Fully functional Prodpsyl In Sofx Ai Tsc

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Pedpsltlx Tsfx Ai Torc Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: ready for operation (used), Year of construction: 2014, The HOLZ-HER EVOLUTION 7405 is a compact yet powerful vertical CNC machining center that delivers complete machining in a single setup—with precise milling on all four edges for perfectly finished parts. The machine processes materials from 8 to 70 mm thick and up to 3200 mm in length, while taking up minimal floor space, making it an extremely flexible and efficient solution for modern furniture and woodworking production. Brand: Holz-Her Model: Evolution 7405 Year of manufacture: 2014 Stock No.: 2002879BXA TECHNICAL DATA Machining dimensions Maximum material thickness: 8 – 70 mm. Vertical through-feed (width): 1,200 mm. Length: Unlimited (1,500 mm without repositioning). Minimum workpiece: approx. 200 x 70 mm. Working dimensions (X, Y, Z) Max board size (without additional support): X: 3,200 mm Pedpfxsyxbv Rs Ai Tjrc Y: 920 mm Z: 70 mm Minimum workpiece size: X: 200 mm Y: 70 mm Z: 8 mm Maximum machining In the X direction (without re-clamping): Circular milling/formatting (excl. milling radius): 1,450 mm Complete machining (milling, drilling, milling groove): 1300 mm In the Y-direction: 920 mm Performance & Spindle Spindle power: 7.5 kW (4-axis) / 6.5 kW (standard) / 10.3 kW (optional) HSK mounting. Tool changer: 6-position (standard on 4-sided). Spindle speed: Variable, high-performance. Vector speed: 68 m/min. Features & Equipment 4-sided machining: Complete formatting and edge profiling. Drilling unit: Standard with milling spindle and drill head. Vacuum system: Intelligent, automatic positioning of suction cups. Control system: CAMPUS/NC Hops. Requirements Floor space: Less than 5 m²