Shrinking machine

Kallfass

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Iisdsw Nykmspfx An Hef

Condition: used, Year of construction: 1997, functionality: fully functional, Kallfass KFP-4000-4 destacking unit Iiedpfx Ajzty Raon Hjf Package length: 2500 mm Feeding to the edge bander infeed conveyor Spacer conveyor

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction Iiedpfxsxnzlhj An Hsf

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204 Iiedpfx Aozpgh Den Hef

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Iijdpfx Anszpghwe Hef Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel from Hugo Beck Kallfass Universa 500, year of manufacture 2011. The system is immediately available. The price of the complete system includes the Universa 400. The machine has been technically overhauled and is in very good condition. Iodpfszn Up Tox An Heif Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing bar gap - Film guide plate, available as an option - Control: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing element - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel Hugo Beck Transverse and side sealing have been inspected and overhauled. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine is available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in a complete wrap and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film via a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped with film, transverse sealing is carried out with a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. The remaining strip of film is collected on a film reel. If required, we also offer installation and service for this system or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel by Hugo Beck Kallfass Universa 500, manufactured in 2011 The system is available immediately. The price of the complete system includes the Universa 400. The machine is technically refurbished and in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing gap - Film guide plate, available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing strip - Side sealing knives - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel: Hugo Beck Transverse and side sealing are checked and refurbished. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine will be available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Iodpfx Aezn Un Aon Hsif Fully automatic flow-pack machines for packaging products - regardless of their length - with complete wrapping and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted for different product widths. After the product is wrapped in film, transverse sealing is performed using a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film take-up reel. If required, we also offer installation and service for this or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm Isdpfexdxv Nsx An Heif - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. Iiedjzmyguopfx An Hef The machine can be used as a source of spare parts or, with some skill, be restored for further use. Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. If you have any questions or require additional detailed photos, please do not hesitate to contact us.

Condition: good (used), Format 500 x 500 mm. Iisdpfsgt Unkex An Hef