Shrinking equipment

Kallfass Universa

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / Product length min. 80mm Arbeitshöhe (einstellbar) / Working height (adjustable) 780 mm – 930 mm Geschwindigkeit des Transportbandes / Speed of transport conveyor, fix: 20 m/min Folie: Halbrundfolie / Film centre-folded film, approx. 12 – 80micron Folienrolle, Kerndurchmesser / Außendurchmesser / Film roll, core diameter / outer diameter approx. 76 mm - max. 400 mm Breite der Folienrolle / Width of film reel max. 600mm Stromversorgung / Power supply 400 volts, 3-phase, 50 Hz, with protective earth conductor Nennkapazität / Rated capacity 3.5 kVA Pedpfx Aoz Hwuasi Tjrc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: M09.01.031, total length: 1,950 mm, total height: 1,950 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 360 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 450 mm, passage height: 120 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, Fully automatic side sealing machine UNIVERSA 400 NT Used machine; year of manufacture 2001 In good working and visual condition Description: Fully automatic flow wrapping machine for packaging products – regardless of their length – with full enclosure and without film overlap. The maximum output is approximately 40 cycles/minute. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is performed by a horizontally scanning light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped in film, it is cross-sealed using a continuously heated sealing system. The longitudinal seal is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film winder. Suitable for all common half-tube films from approximately 12 - 80 µm, e.g. polyethylene or polyolefin films such as Clysar®, Cryovac® or others. Extensive standard equipment: • Film roll placed with motorized film unwinding Prsdpfjz Eguaox Ai Toc • Product feeding control via light barriers • Conveyor belts with infinitely variable speed control via frequency converter • Conveyor belts at the sealing die transition with knife edges • Infeed conveyor belt can be extended for easy and quick threading of the film • Continuously heated sealing die with replaceable sealing bar in various profile shapes to achieve optimal seals depending on the product and film • Electro-mechanical sealing die drive • Continuous side sealing • Motorized film transport with automatic film end winding • Memory-programmable controller • Operator panel integrated in the front frame • Operator guidance and error diagnosis via multilingual text display (German, English, French) including integrated package data memory • Adjustable working height Machine design in accordance with the EC Machinery Directive 89/392/EEC (CE marking), according to VDE guidelines and in accordance with the relevant accident prevention regulations. Available optional equipment: • Film perforation unit with precision needle roller, with 3 rows of needles • Film absence detection • Film end detection Technical data: Length of cross sealing die: 450 mm Min. product length: 80 mm Film: Half-tube or flat film, approx. 12 - 80 µm Film roll holder: Arranged close to the floor for easy loading Film roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film width: max. 600 mm Working height: 780 - 930 mm Conveyor belt speed, variable: 10 - 35 m/min. via frequency converter Sealing system: Sealing die continuously heated with replaceable sealing bar, completely odorless operation, temperature control and monitoring via PLC Sealing die clearance height: max. 150 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kW Rated current (at 400 V): 5.0 A Switchgear cabinet position: on the right in the direction of operation Paint finish: Kallfass anthracite

Condition: ready for operation (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: M09.01.031, total length: 1,950 mm, total height: 1,500 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 360 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 450 mm, passage height: 120 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, Fully automatic side sealing machine UNIVERSA 400 NT Used machine; year of manufacture 2001 In good working and visual condition Description: Fully automatic flow wrapping machine for packaging products – regardless of their length – with full enclosure and without film overlap. The maximum output is approximately 40 cycles/minute. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is performed by a horizontally scanning light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped in film, it is cross-sealed using a continuously heated sealing system. The longitudinal seal is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film winder. Suitable for all common half-tube films from approximately 12 - 80 µm, e.g. polyethylene or polyolefin films such as Clysar®, Cryovac® or others. Extensive standard equipment: Prodpfx Aijz Egn Ho Tec • Film roll placed with motorized film unwinding • Product feeding control via light barriers • Conveyor belts with infinitely variable speed control via frequency converter • Conveyor belts at the sealing die transition with knife edges • Infeed conveyor belt can be extended for easy and quick threading of the film • Continuously heated sealing die with replaceable sealing bar in various profile shapes to achieve optimal seals depending on the product and film • Electro-mechanical sealing die drive • Continuous side sealing • Motorized film transport with automatic film end winding • Memory-programmable controller • Operator panel integrated in the front frame • Operator guidance and error diagnosis via multilingual text display (German, English, French) including integrated package data memory • Adjustable working height Machine design in accordance with the EC Machinery Directive 89/392/EEC (CE marking), according to VDE guidelines and in accordance with the relevant accident prevention regulations. Available optional equipment: • Film perforation unit with precision needle roller, with 3 rows of needles • Film absence detection • Film end detection Technical data: Length of cross sealing die: 450 mm Min. product length: 80 mm Film: Half-tube or flat film, approx. 12 - 80 µm Film roll holder: Arranged close to the floor for easy loading Film roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film width: max. 600 mm Working height: 780 - 930 mm Conveyor belt speed, variable: 10 - 35 m/min. via frequency converter Sealing system: Sealing die continuously heated with replaceable sealing bar, completely odorless operation, temperature control and monitoring via PLC Sealing die clearance height: max. 150 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kW Rated current (at 400 V): 5.0 A Switchgear cabinet position: on the right in the direction of operation Paint finish: Kallfass anthracite

Condition: used, Year of construction: 2017, functionality: unexamined, total length: 3,500 mm, total height: 1,500 mm, total width: 1,700 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 500 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 550 mm, passage height: 200 mm, overall weight: 1,500 kg, power: 3 kW (4.08 HP), film width: 600 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 500 servo Year of manufacture: 2016, installation: 2017 Further details available upon request. Podpfx Ajz D S Ebsi Terc See also the images in the attachment. 1 Kallfass Universa 500 Servo, 2017 1 Kallfass Shrink Tunnel Compact 650DD, 2017 1 Kallfass Conveyor Table 1 Outfeed conveyor after the shrink tunnel

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Podpjq Htfnofx Ai Tjrc Subjected to hard, continuous use.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty. Prjdpfow E Igvjx Ai Toc

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Fully automatic flow pack machine for packaging products – regardless of their length – in a full wrap and without film overlap. Product infeed is via a conveyor belt while simultaneously wrapping into a center-folded film using a forming shoulder. Product separation is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing device. The height position of the forming shoulder and sealing units is manually adjustable. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Cross sealing bar: 850 mm Film: center-folded film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Pass-through height: 300 mm Working height: 780 - 930 mm Pjdpfxoyybuie Ai Tsrc Power supply: 400 Volt three-phase, 50 Hz with protective conductor Rated output: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible in our facilities by appointment. Functionality guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully automatic flow-pack machine for packaging products – regardless of their length – in a fully enclosed manner and without film overlap. The products are fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. Product detection is carried out using a light barrier. The feed belt can be easily adjusted to accommodate different product widths. The longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Worn parts and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing stamp: 450 mm Film: Half-tube film, approx. 12 - 80 µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Prsdpfx Aisz A Dfqs Tec Rated current: 5.1 A Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm Pjdpow Ddb Tefx Ai Tsrc - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: used, Year of construction: 1998, Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible. Pedpfx Ajz Akv Ssi Terc