Used Air Cooled Water Chiller for sale (36,494)

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Itjdjzz Rfqopfx Ag Asn Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Rittal Type: SK 3336.509 Technical details: KRA-0045TD00SB97AJ Cooling unit/chiller Rated voltage 3/400V 50Hz Maximum current 6.7 A Starting current 30.4 A Nominal cooling capacity 5040 W Maximum power consumption 3340 W Permissible pressure PT ref: 10 Allowable pressures|PS HP: 24 PS LP: 14 Refrigerant/charge R134a - 2.2 + OKg Temperature range +15 / +43°C Fluid pressure range 1.55-3.75 bar Volume flow rate min 20 L/min...max 70 L/min Tank volume 57 l Noise level 69 dB(A) Protection class EN60529571 IP 44 Year of manufacture Weight 150 kg Condition: used Itjdszh Dnxspfx Ag Ajn Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Ijdpfxorzq Are Ag Astn Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: used, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Itsdpsi D D Rvofx Ag Ajn Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: used, Year of construction: 2015, cooling capacity: 23.15 kW (31.48 HP), type of input current: three-phase, type of cooling: air, overall weight: 180 kg, input voltage: 400 V, total width: 400 mm, total length: 1,450 mm, total height: 1,540 mm, heating capacity: 23.5 kW (31.95 HP), Aircooled chiller/Heat pump SYSTEMAIR 24 AIR EVO PH 23.15 kW/23.5 kW Cooling capacity: 23.15 kW / 6.58 tons (12/7 — 35°C) Heating capacity: 23.5 kW / 6.68 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (inverter) Hydraulic module: 1 pcs. water pump Wilo para 25/1-12 t1 (Frequency inverter) Dimensions: 1.45x0.4x1.54 m. Weight: 180 kg. Iedpfxoy Ryqwe Ag Aotn Needs to be configured

Condition: good (used), IKS Cooling Unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. Pressure: 27.6 bar Temp. min/max: -10/55°C Iodpjxbfknjfx Ag Aetn Cooling capacity: 20.4 kW Compressor power consumption: 5.6 kW Temperature stability: 2 K Tank capacity: 110 liters Water connections: 1 1/4" male thread Cooling air volume: 5370 m3/h Power connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: L x W x H 980 x 800 x 1785 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, HUBER Unichiller / Recirculating Chiller / Process Chiller Huber Unichiller 055Tw Water-cooled recirculating chiller with Pilot ONE touchscreen controller For sale is a used Unichiller from the manufacturer Huber. The unit is suitable for temperature control and cooling of machines, industrial plants, laboratory applications, process plants, as well as for general industrial cooling applications. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Isdpfozui T Hjx Ag Aetn Equipment type: Recirculating chiller / Process chiller Temperature range: -10 to +40 °C Mains connection: 400 V / 3~ / 50 Hz Max. current draw: 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar CFC & H-CFC free Control: Huber Pilot ONE Touchscreen control unit Features: Pilot ONE touchscreen controller Stainless steel housing Main switch Cooling water connections Process connections Drain connections Transport rollers Crane eyes / Lifting eyes Connecting hoses as shown in the pictures Application areas: Process cooling Machine cooling Industrial plants Production plants Laboratory applications Temperature control applications Cooling water supply Dimensions: 600 × 600 × 1,450 mm (W × D × H) Net weight: 168 kg Scope of delivery: 1 × Huber Unichiller 055Tw Connecting hoses / accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Julabo Type: FLW20006 Julabo FLW20006 Recirculating Chiller / Cooling Unit 400 V Year of manufacture 2021 – As new condition For sale is a Julabo FLW20006 recirculating chiller for laboratory and industrial applications. The unit was manufactured in 2021 and has not been used, therefore it is in as-new condition. The recirculating chiller is water-cooled and is ideal for demanding process and machine cooling applications. High-quality Julabo industrial design, robust construction, and mobile on castors. Ijdpezix Dwsfx Ag Astn Special features: As-new condition / not used Water-cooled Digital temperature control RS232 interface Alarm contact Robust industrial design Mobile on castors Technical data (according to nameplate / manufacturer) Manufacturer: Julabo GmbH Model: FLW20006 Year of manufacture: 2021 Protection class: IP21 Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 18 A Refrigeration technology: Refrigerant: R452A Filling quantity: 2750 g Operating pressure HP / LP: 26 bar each CO₂ equivalent: 5.88 t GWP: 2140 Temperature data (FLW series) Temperature range: -20 °C to +40 °C Temperature stability: ± 0.5 °C Dimensions & Weight (approximate values) Dimensions (H × W × D): approx. 1200 × 600 × 800 mm Weight: approx. 220–240 kg Shipping & Delivery: Condition: As new Scope of delivery: Julabo FLW20006 Recirculating Chiller Connecting cable Shipping method: Freight shipping on a pallet (upon agreement, shipping costs depend on the destination) Collection: possible by appointment. (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. Itodpfezrlzzjx Ag Aon 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III fill system, which allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Main Features of the S1500E Series Maintenance Access: A large, inward-swinging access door, as well as internal maintenance platforms, allow technicians to conveniently perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight through special air inlet elements, which reduces algae growth. Flexibility: Thanks to the single-sided air inlet, the cooling tower can also be installed in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Itodpfxoynkbme Ag Aon Typical Applications Industrial Cooling: Used in factories for process cooling. Air Conditioning (HVAC): Used in large building complexes as part of a central chilled water system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity because the actual performance depends entirely on the prevailing thermodynamic ambient conditions and the system temperatures. This model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the inlet warm water temperature (e.g., 35 °C) and the outlet cold water temperature (e.g., 29 °C). Air volume flow: According to the technical data from BAC, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three 11.0 kW fan motors. If this air volume is reduced by a frequency converter (e.g., during nighttime operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of cooling capacity the tower produces. Technical Data: Fan & Air Data Air volume flow: 60.0 m³/s (generated in draw-through operation) Fan motors: 3x 11.0 kW (axial fans) Technology: Integrated belt drive Water flow: 198 l/s Hydraulic Connections Water inlet (fluid inlet): 1x DN 250 (nominal size ND 250 mm) Water outlet (fluid outlet): 1x DN 300 (nominal size ND 300 mm) Make-up water connection: 1x DN 40 (ND 40 mm) Overflow / drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions & Weights Operating weight: 11,446 kg (including water filling up to the overflow) Shipping weight: 5,350 kg (empty weight) Heaviest single part: 3,

Condition: used, Year of construction: 2015, functionality: fully functional, Water chiller, brand Eurocold, 15 kW (13,072 frigorías), model ACW-MP120 AL SL D2, with 65-liter tank, refrigerant R-407C, consumption: 6.4 kW, water flow from 20 to 100 liters/minute. Dimensions: 755x790x1380 mm (height), weight 190 kg. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, wine production, etc. Unit inspected, fully charged with refrigerant, with warranty. Delivery across Spain and Europe. Shipping costs not included. Reference: 1149. Available stock: 30 units. Itedpfx Aox Nf Npog Asn

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Isdozf Ibkopfx Ag Aotn Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 131 kW (178.11 HP), type of cooling: air, aircooled Chiller MTA Cooling cap.131 KW (47 refr.tons), 2 circuits with each 2 scroll compressors, Direct expansion evaporator, with integrated pump and tank Iodpfoyuvppex Ag Ajtn R 410a tested,ready for operation

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cooling capacity: 327 kW (444.60 HP), type of cooling: air, low hours 2 circuits, R410a, scroll compressors Iodez Hvz Espfx Ag Aotn with integrated pump and tank Cooling Capacity: 327KW (100 refr.tons)

Condition: excellent (used), I am offering for sale a professional Unitek Benchmark laboratory chiller/recirculator. This unit is designed for cooling and maintaining a constant temperature of liquids in laboratory systems, measuring devices, lasers, medical equipment, and other systems requiring a cooling circuit. The housing is made of coated steel, and the tank is a durable construction resistant to the effects of cooling fluids. Technical data: Manufacturer: Unitek Benchmark Stock No.: 043008 Serial No.: LJ080297F Power supply: 230 V AC Current: 3.1 A 1 phase Frequency: 50/60 Hz Condition: Used. Very good visual condition. Sold in the exact condition as shown in the pictures. Itedpfjz Sndlex Ag Asn

Condition: ready for operation (used), Rittal SK3330.009-GKG815 Recirculation Chiller Nominal cooling capacity: 15000 W - 3/400V 50 Hz 15000W - 3/460V 60 Hz Maximum power consumption: 7360 W - 3/400V 50 Hz 9960W - 3/460V 60 Hz Temperature range: +5 / +43 °C Refrigerant: RA134a-5.5 Kg Tank volume: 75 l Weight: 143 kg Year of manufacture: 2014 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Itodoz Hmdwopfx Ag Asn Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 291 kW (395.65 HP), type of cooling: air, heating capacity: 324 kW (440.52 HP), aircooled Chiller Daikin EWYD290BZ SL, Heatpump Itedpfxsz Hvwyo Ag Asn Cooling cap.291 KW (85 refr.tons),Heating cap. 324 KW(100 refr.tons) 2 circuits with 2 semihermetic screw compressors,inverter driven Shell+Tube evaporator, with integrated 1 pump R 134a tested,ready for operation

Condition: ready for operation (used), Rittal SK3330.009-GKG815 Recirculation Chiller Nominal cooling capacity: 15000 W - 3/400V 50 Hz 15000W - 3/460V 60 Hz Maximum power consumption: 7360 W - 3/400V 50 Hz 9960W - 3/460V 60 Hz Temperature range: +5 / +43 °C Refrigerant: RA134a-5.5 Kg Tank volume: 75 l Weight: 143 kg Year of manufacture: 2014 Isdpfx Agoz Hkgps Ajtn You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2011, operating hours: 6,967 h, condition: used, functionality: fully functional, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, 390 kW (335,400 frigories), R-410 gas, 5 scroll compressors, tubular heat exchanger, Dimensions: 3690 x 2242 x 2393 mm high, Weight: 2805 kg, with 6 axial fans. Ijdpfx Ajwg Hnnog Ajtn Equipment tested and guaranteed in Spain.

Condition: like new (used), Year of construction: 2014, operating hours: 9,000 h, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,404 kg, input voltage: 400 V, total width: 2,950 mm, total length: 922 mm, total height: 2,000 mm, empty load weight: 1,404 kg, (offer: price already reduced by 20%) used water chiller, second-hand completely revised. - brand: Carrier. 162 kw water-water system (139320 frigories). model: 30RW-160-A0178-PE-.gas R407C. 4 scroll compressors and 2 water pumps. 2 plate exchangers. Consumption 63 KW. Equipment reviewed and with its factory gas reference: 1060 Only 9000 hours of compressor use. Itsdpfx Aevpg Areg Asn

Condition: ready for operation (used), Rittal SK3335.159 Secondary cooler, cooler, chiller Weight: 250 kg Refrigerant: R407C Temperature range: +10 / +43 Rated voltage: 400 V Cooling capacity: 15000 W Power consumption: 9700 W Itsdpez Hmf Uefx Ag Aen Tank capacity: 80 liters You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 51.8 kW (70.43 HP), type of input current: three-phase, type of cooling: air, overall weight: 285 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,500 mm, total height: 1,270 mm, warranty duration: 6 months, Air Cooler Guntner GACV FP 080.1JF/1A-40E 51.8 KW Cooling capacity: 51.8 kW / 14.73 tons Year of manufacture: 2020 Options: Electric three-phase system heating. Fluid: Glycol Air flow: 17934 m³/h Fluid flow: 2.18 m³/h Number of fans: 1 pcs. Volume: 44.5 dm³ External surface: 239.8 m² Dimensions: 2.5 x 1 x 1.27 m. Weight: 285 kg. CONDITION, TESTING & READINESS Iodpfx Agez Hkdzs Aotn The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2019, Complete system for sale: 1 York chiller and one Jäggi cooling unit. Itjdpev Npgmjfx Ag Aen

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Manufacturer: Rittal Series: TopTherm Type: SK 3209500 Device type: Air/water heat exchanger Itodpfxozdafgo Ag Aon Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Itoded Tv H Dspfx Ag Ajn Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!