Used Automatic Front Loading Tumble Dryer for sale (50,895)

Condition: used, Diesel-powered forklift, compact forklift, MORA Type M80CS Manufacturer's No. 20087, Year of Manufacture 2006 Rated load capacity: 8 tons Lifting height: 3800 mm Fork length: 1800 mm Fork carriage width: 1460 mm Overall height: 3030 mm Lredpfoitv Rdjx Aa Rsr Overall width: 1460 mm Overall length without forks: 3350 mm Self-weight: 12740 kg - Duplex mast with 1950 mm free lift - 4-cylinder PERKINS diesel engine - Fully enclosed cab with heater - Electro-hydraulic tilting mechanism for the cab - Hydraulic power steering - 2 work lights at the front, 1 work light at the rear - Yellow warning flashing light on the protective roof - Solid rubber tires (front: 28 x 10 x 22, rear: 250/70 - 16) - 9646 operating hours recorded - New UVV/TÜV inspection passed Good condition Rental available upon request.

Condition: used, Diesel Forklift Truck LUGLI Type 455e Front forklift, compact forklift Factory No. 5364010504 Year of manufacture: 2001 Rated capacity: 4,500 kg Lift height: 4,000 mm Lredpfju H R I Djx Aa Rer Fork length: 1,500 mm Fork carriage width: 1,300 mm Overall height: 2,720 mm Overall width: 1,460 mm Overall length without forks: 2,900 mm Unladen weight: 6,800 kg - Duplex clear-view mast with 150 mm free lift - Hydraulic side shifter (200 mm) - 4-cylinder PERKINS diesel engine, Type 1004.42, 60 kW - Hydrostatic drive with double pedal control (like Linde) with Linde/Poclain components - Fully enclosed operator cab with heating and removable doors - Fully hydraulic steering - HUSS particulate filter with electric cleaning via 230-volt plug connection - 2 front work lights, 1 rear work light - Yellow warning beacon on protective roof - Solid rubber tyres (front NEW 250 x 15, rear 23 x 9 - 10) - 5,650 operating hours (displayed) - New TÜV UVV inspection (surcharge EUR 150 net) Good condition

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 07762, We offer this used sample dryer Tonello TD 25 E, year of manufacture 2018. Machine type: TD 25 E Power supply: 3Ph+GND Voltage and frequency: 400V - 50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 375 kg Serial number: 07762 Year of manufacture: 2018 Drum volume: 572 l Installed power: 26 kW Maximum peak current: 65 A Maximum working current: 52 A Power cable section: 16 mm² Lrsdpfx Asyt Npmoa Ror If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER Lrsdoyk Sl Sspfx Aa Rjr The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Lrjdpfx Aey Edp Hea Rjr Max. panel length: 3800 mm Main saw blade projection: 115 mm No of Grippers: 11

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). Lrodpfx Aajv Aalyo Rjr - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Ledpsyg Edmsfx Aa Rerr Max. panel length: 4250 mm Main saw blade projection: 95 mm

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes Lrsdpjy Nkygsfx Aa Rsr

Condition: ready for operation (used), Year of construction: 1989, A Still diesel forklift is available. Payload: 3500kg, max. gross weight: 10000kg, load center: 500mm, load distance: 510mm, engine: Mercedes-Benz OM617, displacement: 3m³, engine power: 46.5kW, wheelbase: 1950mm, mast: duplex, lift height: 3320mm, machine dimensions X/Y/Z: approx. 3950mm/1350mm/2400mm, weight: approx. 5450kg. An on-site inspection is possible. Lrsdpezk Nalofx Aa Rer

Condition: used, Year of construction: 2012, operating hours: 5,600 h, load capacity: 5,000 kg, lifting height: 6,000 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, LINDE H50T-01 FORKLIFT TRUCK GAS SYSTEM | TRIPLEX | GRAMMER CABIN | SINGLE OWNER SINGLE OWNER YEAR OF MANUFACTURE: 2012 LOAD CAPACITY: 5,000 kg UNLADEN WEIGHT: 7,040 kg ENGINE POWER: 55 kW Lsdpfxoyqdldo Aa Rjrr OPERATING HOURS: 5,600 LIQUEFIED PETROLEUM GAS (GAS SYSTEM) TRIPLEX MAST HYDRAULIC CONNECTIONS AUTOMATIC TRANSMISSION GRAMMER DRIVER'S CABIN HEATER SIDE DOOR AVAILABLE (NEVER USED) LIGHTING GOOD TIRES IMMEDIATELY READY FOR OPERATION EXPORT SALES ONLY WITH DEPOSIT MINIMUM €500 – €2,000 EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES AND 17 – 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS EXCLUSIVELY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500 / €1,000 will be charged. Subject to changes, errors, and prior sale! You can find more vehicles on our homepage: Sale takes place exclusively according to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our offer, errors may still occur. Some of these errors result from transmission faults across different platform providers. Therefore, all details are provided without guarantee and do not represent any legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Instead, it provides information to initiate a contract. All information provided is without guarantee and does not constitute guaranteed characteristics.

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Lodpfx Aaou N Slij Rerr Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008657, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 115 mm No of Grippers: 8 Lrodpfxezvwnno Aa Ror

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes Lredpfx Ajiwbfuja Rsr

Condition: used, machine/vehicle number: 008548, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Ljdpfx Ajzvwtwja Rorr Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008547, Max. panel width: 4300 mm Max. panel length: 2200 mm Lodpfx Aaszvwtke Rerr Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Lredpfx Asw Iddhea Ror Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 8

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Lredpfxevvxumo Aa Rjr

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Ledpfxewuufds Aa Rjrr Max. panel length: 3800 mm No of Grippers: 7

Condition: used, Year of construction: 1988, operating hours: 1,138 h, load capacity: 7,000 kg, lifting height: 3,350 mm, fuel type: diesel, gearing type: automatic, Equipment: head guard, * Hydraulic fork adjustment * 55kW diesel engine (water-cooled) * Protective roof Ledpfxozaicme Aa Rjrr * Fork length: 2500mm ----Vehicle number 12135 ----Errors and prior sale excepted

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm Lrsdpsxaudzofx Aa Ror No of Grippers: 11

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Ljdjvrrldopfx Aa Rerr Main saw blade projection: 152 mm No of Grippers: 11 Thin sheet loading: yes

Condition: good (used), RMF Vacuum Tumbler Capacity 1250 ltr Lrodpfx Aaenmyx Es Rsr Model MM2 - LD2 With Tote Bin Loader All stainless steel In excellent condition

Condition: good (used), functionality: fully functional, machine/vehicle number: H2X393R05448, Year of construction: 2004, operating hours: 9,619 h, load capacity: 3,500 kg, free lift: 1,400 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), fork length: 1,600 mm, tire condition: 70 %, front tire size: 27x10-12, Equipment: cabin, lighting, trailer coupling, For sale is a very solid and reliable Linde H35D diesel counterbalance forklift with a triplex mast and hydraulic fork positioner, year of manufacture 2004, with 9,619 operating hours. The forklift is in very good, well-maintained condition and fully operational. ✅ Recent UVV safety inspection valid until 01/2026 ✅ Major service carried out 01/2026 Engine, hydraulics, mast, and attachments work flawlessly. The forklift is immediately ready for use, with no backlog of maintenance. Specification & Details: Manufacturer: Linde Model: H35D Year: 2004 Operating Hours: 9,619 h Mast: Triplex Attachment: Hydraulic Fork Positioner Condition: Good Lredpfx Aex Tn Aasa Ror Operational: Fully functional UVV safety check: New 01/2026 Major service: New 01/2026 Serial No.: H2X393R05448 Ideal for professional warehouse, indoor, and industrial applications, especially where pallet widths frequently change. Inspection and test run under power available by appointment. Sale due to fleet restructuring. Offered without warranty or guarantee.

Condition: used, machine/vehicle number: 008503, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8 Lrjdpfx Aasy Hcd Ee Rer

Condition: used, Year of construction: 2013, operating hours: 11,328 h, load capacity: 3,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, Linde Forklift H30D+02 EVO VIN: D54691 * 11,328 operating hours * Solid rubber tires front and rear * Duplex mast * Forks 1200mm * Heater * Air conditioning * Rear-view camera * Radio * Load capacity 3.0 t Other information: * 1 previous owner New main inspections / safety checks or load capacity downgrades/upgrades are available on request. We are also happy to assist you in obtaining export/transfer license plates, and vehicle delivery within Germany is possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Ljdpfx Aaeyb U Hyo Rorr Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and professionalism. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transport We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to arrange export/temporary license plates for you. Customs clearance We are happy to assist you with customs procedures.