Used Biesse Nesting Cnc Working Centre Throughfeed for sale (53,093)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Nsdjugpwnopfx Aa Roda Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Nodpoyvqdfsfx Aa Rsda Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Ndjdpott S D Rjfx Aa Rsa Good condition. Available immediately.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. Ndedpfsi U Dxusx Aa Roa 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel Ndodpfx Aajuickye Rea N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW Ndjdpfshknbrex Aa Rea AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Nedpfxezdiz No Aa Roda Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Ndedpfx Aohwi U Tja Rja Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables Ndodpezutraefx Aa Rea MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. Nedpszukurofx Aa Rsda - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm Ndsdpfx Aszutrtoa Rea - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: used, BIESSE Rover 24 S CNC Machining Center Manufacturer: BIESSE Model: Rover 24 S Year: 2001 Serial No.: 16171 Power supply: 230 V Power: 20 kW Rated current: 59 A Frequency: 50 Hz Ndodpfx Aezrv Hbea Roa Air supply: 6.5–7.5 bar Required air flow: 30 m/s Weight: 3,450 kg The machine requires service and maintenance

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Njdpex A E Tfefx Aa Reda Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, Technical Specifications Ndjdpfx Aajzutq Aj Roa - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW - Total power consumption: 20 kW

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 175 h, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, overall weight: 2,500 kg, table width: 950 mm, working width: 950 mm, air pressure: 6 bar, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, rotational speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! Ndedpoxmbm Asfx Aa Rea 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Pickup station for additional tools Drilling head DH17 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Condition: used, Technical specifications: - X = 3,060 mm - Y = 1,320 mm - Z = 150 mm - Central automatic lubrication system - 6 ATS workpiece supports - 18 bearing consoles - Vacuum system with division into 2 working areas in the X-direction - Pneumatic system for console adjustment - 2 independent working areas in the X-direction - 4 workpiece supports - 12 clamping devices for clamping narrow workpieces - Conveyor belt for removing chips and cutting waste - Vacuum pump, 90 m³/h - 12 kW electric spindle with ISO 30 tool holder, air-cooled - The machine is additionally equipped with an integrated rotary unit that is integrated into the machine control system and functions as a 5th axis for drilling operations at different angles. - Tool changer with 10 tool positions - Manual laser barcode scanner Drilling unit BH 21L - 7 + 7 vertical drilling spindles Nsdpfx Aezutqvja Roda - 6 horizontal drilling spindles (4 in the X-direction, 2 in the Y-direction) - 1 grooving unit (saw blade) in the X-direction

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: Ndedpstqfv Iofx Aa Rsa - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, Year of construction: 2011, max. workpiece length 4100 mm profile spindle 8 Stück main drive 16 kW Control SIEMENS Working Process Wooden Window Production Line ----- Sale on behalf of the client; ex-site. System can be viewed while still in operation! System comprising: Item 1: Infeed conveyor following the planer (planer NOT included) Item 2: Working Process Sapiens, Year of Mfg. 2011 (end-grain milling and drilling) - Spindle 1: 10 kW, HSK-E63, A/C-axis - Spindle 2: 10 kW, HSK-E63, A/C-axis - Spindle 3: 16 kW, HSK-E63, C-axis - Spindle 4: 16 kW, HSK-E63, C-axis Item 3: Transport system to LOGOS SCH Item 4: Working Process LOGOS SCH, Year of Mfg. 2008 (end-grain and longitudinal milling and drilling) - Spindle 1: 16 kW, HSK-E63 - Spindle 2: 16 kW, HSK-E63, C-axis - Spindle 3: 10 kW, HSK-E63, C-axis, A-axis - Spindle 4: 3 kW, fixed configuration, for 2 tools (e.g., for weather-seal grooves, wood-aluminum clip slots, etc.) - Central pick-up tool changer with 95 tool positions Nsdszughuepfx Aa Rsda Item 5: Outfeed conveyor Detailed descriptions and layout available upon request! (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 6,452 h, input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, number of axes: 4, Equipment: CE marking, documentation/manual, Biesse Rover C6 — CNC apstrādes centrs Pod & Rail, 2008. gads Biesse Rover C sērijas CNC apstrādes centrs ar pod & rail darba galdu. Ndedpozvy U Djfx Aa Roa Frēzēšana, urbšana un profilēšana — paneļi un masīvkoks. Iekārta pilnībā funkcionāla. Apskate un demonstrējums zem sprieguma pēc iepriekšēja pieraksta Kalnciemā, Latvijā. Detalizēta tehniskā specifikācija — precīzs modeļa apzīmējums, darba zona, vārpstas jauda, asu skaits, instrumentu magazīna un darba stundas — pieejama pēc pieprasījuma vai apskatē uz vietas. Cena EXW Kalnciems. Palīdzam ar demontāžu un iekraušanu.

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Nsdpfx Ajzqtztoa Rjda Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Ndjdpfx Aaszq Ur Hs Rja Number of controlled axes: 3 axes Total number of drilling spindles: 52 Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Nodjzq Ur Tspfx Aa Rsda Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Nedpfxsum H Eke Aa Rjda Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Nodpfeyr Uguex Aa Rsda Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Njdpfx Aaoyaywhj Reda Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.