Used Casepacking Monoblock for sale (256)

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm Kodpfexvr T Ejx Ai Redr - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm Kedpsxvr Upsfx Ai Redr - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Kdjdpfx Aisxa Euds Rsr Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm Kjdpfx Aowiu Rvji Rjdr PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: new, PJM pumps are designed for pumping clean and slightly contaminated water in water supply installations, booster sets, pump units, heating systems, and other installations, such as industrial systems. They can also be used for pumping other non-aggressive liquids that do not affect the materials the pump is made of. Kjdpfx Aijyaqchs Rodr

Condition: used, Year of construction: 2013, x-travel 735 mm Kdjdpjzipzyefx Ai Rer y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: used, Year of construction: 2008, machine/vehicle number: MBI20, Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Automation & Control SystemsThe monoblock features PLC-based controls for synchronized operation of each module, ensuring stable throughput and high repeatability across shifts. Automated sequencing coordinates carton erection, bottle grouping and loading, partition insertion, and closure, minimizing manual intervention. The control logic supports quick stops and restarts, fault diagnostics, and consistent performance for demanding production schedules typical of a used bottling line.Centralized PLC control for all stationsAutomated timing and interlocks between modulesConsistent, repeatable handling for glass packagingDesigned for efficient format adjustments between 6 and 12 bottlesProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into beverage production environments, upstream of palletizing. It can operate inline with conveyors from filling, labeling, and inspection equipment or as a standalone packaging center with infeed and outfeed conveyors. The integrated high-capacity magazine ensures continuous supply of cartons, while automated case closing with tape simplifies downstream logistics.Inline or standalone operationHigh-capacity carton magazine for extended autonomySuitable for wine bottling and other glass-based productsHandles 1.5L bottles; adaptable to 6 or 12 bottle case patternsMachine Condition & Maintenance HistoryThis second hand Casepacking Monoblock is presented in used condition and suitable for integration into an operational packaging line. Built in 2008, it aligns with industrial packaging standards of its generation and is configured for glass bottle handling with tape sealing. Its PLC-managed design supports reliable operation and straightforward maintenance routines typical of robust TMG engineering.Operational Performance & VersatilityDesigned to protect premium products such as sparkling wine, the monoblock combines precise bottle loading with automatic partition insertion for... Kdjdpfjzb Ikrsx Ai Rjr

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: M329, Used ELOPAK sks-s60S shikoku monoblockTechnical Specifications & Performance DataThis aseptic carton filling monoblock is engineered for high hygiene beverage packaging within a used bottling line or second hand industrial packaging environment. Manufactured by Shikoku Kakoki, it is built for reliability and precise dosing in beverage production applications where asepsis and product integrity are critical.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear: 2007Operating hours: 3339Operating mode: AsepticSupported formats: Compatible with 0.5L, 0.75L, 1.0L carton packagesContainer type: Designed for Carton handlingMachine weight: 6000 kgElectrical: 400 V, 50 Hz, 3-phaseCompressed air: Min. 550 kPa, Max. 930 kPa, Consumption approx. 2,460 NL/minAdvanced Automation & Control SystemsThe monoblock integrates precise filling control for aseptic operations, ensuring accurate volumes across multiple carton sizes. It is designed for automated production with centralized controls and operator-friendly interfaces. Safety interlocks and guards protect operators while maintaining rapid access for adjustments and cleaning. Quick format adjustment supports efficient changeovers between 0.5L, 0.75L and 1.0L.Centralized control with clear status indicationAutomated aseptic cycle managementSafety guarding with interlocked access pointsRapid changeover design for multi-format productionProduction Line Integration CapabilitiesDesigned to integrate seamlessly within industrial packaging and beverage production lines, this aseptic filling monoblock interfaces with upstream carton forming/sterilization modules and downstream closure application, coding, and case packing. It can operate as a standalone station or as part of a complete packaging line.Inline or standalone operationFlexible interface to conveyors and downstream packaging machineryMulti-format capability: 0.5L, 0.75L, 1.0LSuitable for integration in used bottling line and second hand bottling equipment layoutsMachine Condition & Maintenance HistoryThe machine shows low operating hours for its class, indicating limited wear. It is presented in working condition suitable for recommissioning into beverage production. Preventive maintenance-friendly design minimizes downtime and supports predictable operation in second hand packaging machinery environments.Low hours: 3339Well-preserved aseptic filling hardwareReady for operation subject to standard line integration checksOperational Performance & VersatilityPurpose-built for aseptic packaging, the unit maintains sterile conditions throughout the filling cycle. Its format range supports popular retail carton sizes, enabling versatile product portfolios without complex changeovers. The precise filling system ensures consistent fill accuracy and package quality.Aseptic process integri... Kdsdpfx Aioy Epktj Ror

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm Kdsdpfx Aoyz Dcfei Ror max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm Kjdpfx Aeyaci Tei Rsdr max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° Kdodpfx Aioyackdo Rsr table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm Kdodpfevn Ur Eex Ai Rsr z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window Kdedoyztyaopfx Ai Rsr

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spindle refurbished - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows Kjdpex A H Rljfx Ai Rodr

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm Kjdpewpw E Nofx Ai Rsdr z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min feeds x/y/z -stepless 0 - 30.000 mm/min rapid traverse 30 m/min no. of tools in magazin 2 x 12 workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg Kdodpfx Aioy Tyzus Rer internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Kdedpew Ag Ndjfx Ai Rjr Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. Ksdpfx Aijyxv Ihs Rjdr This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: like new (used), Year of construction: 2017, UC MONOBLOCK D.0015 Automatic dosing/closing Machine. Monoblock bottle filling/capping machine for the cosmetic industry. Equipped with 4 filling nozzles by cylinders and 1 vacuum-actuated nozzle for equalizing the product in all containers. Double capping head (pick and place) and vibrating ramp for valve insertion. Filling and vacuum pumps. Production 6000 b/h Filling capacity up to 250 ml Voltage 380-400 VAC + N Power 2.2 Kw With complete documentation and CE Ksdpswr Dzisfx Ai Rodr

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Technical Features and Operating Details of the Used RIVI Filling Monoblock  The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Kdsdpfx Aovxum Dei Rsr Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: used, Year of construction: 1998, Used Filling Monoblock Cerma 1998 Kdsdpfx Asvgupnji Ror The Cerma 46-MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998. It is currently in storage, but is ready to be put back into action at any time. This monoblock is specifically designed for filling glass and PET containers with vinegar, and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results. The monoblock is equipped with 23 valves, which help to ensure that the filling process is fast and efficient. It also has 4 capping heads for aluminum screw caps, which helps to seal the containers securely and prevent any spills or leaks. The rotation direction of the monoblock is counterclockwise. This helps to ensure smooth and seamless operation. In terms of safety, the Cerma 46-MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the product. Manuals are also available for reference, so users can easily understand how to operate the equipment and perform any necessary maintenance. Overall, the Cerma 46-MB filling monoblock is a high-quality and reliable piece of equipment that is perfect for any business looking to fill large quantities of vinegar into containers. With its efficient filling and capping capabilities, it is sure to be a valuable asset to any production line. It weighs a total of 4200 kg, so it is a sturdy and durable piece of equipment that is built to last.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Kdedpfjvgvlkex Ai Ror Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 1995, Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Kjdpfxovguz Dj Ai Rodr Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml

Condition: used, Year of construction: 2004, Used Filling Monoblock Kompass up to 12000 bph Overview and Condition The Used Filling Monoblock Kompass up to 12000 bph is an integrated bottling system, currently stored in warehouse. This machine, produced by Kompass and model SK24 from 2004, is designed to operate at a speed of 12,000 bottles per hour (BPH). It is ideal for bottling juice in glass containers, with specific formats of 0.237 and 1.0 litres. Kdsdpfxovgt Uve Ai Rsr Rinser: Efficiency and Precision The rinsing system of the Used Monoblock Kompass has 24 clamps. This configuration ensures unique and precise treatment for each bottle. The efficiency of the rinsing process is crucial to ensuring the integrity of the final product. Filler: Advanced Technology The filler sector is equipped with 24 valves. It uses a gravity and light depression filling method, with fixed type nozzles. This ensures uniform and accurate filling, essential for maintaining the quality of the juice. The filling temperature is maintained at 85 degrees, optimal for juice. Capper: Reliability and Security The capper, configured for crown caps, includes 6 heads. This section of the Used Monoblock Kompass ensures a secure and long-lasting closure of the bottles. The machinery includes advanced safety features, supported by comprehensive maintenance and operation manuals. The direction of rotation is clockwise. Electrical Data and Storage The machine operates at a voltage of 440V and a frequency of 60Hz. Its storage in the warehouse ensures its optimal condition, ready to be put into operation immediately. Conclusion The Used Monoblock Kompass up to 12000 bph represents a technologically advanced solution for the bottling sector. With a capacity of 12000 BPH, it is suitable for medium and large scale production operations, offering efficiency, precision and reliability.

Condition: used, Year of construction: 1996, Used Isobaric Filling Monoblock Alfatek 12/1 Introduction to the Isobaric Filling Monoblock Alfatek Firstly, the Used Isobaric Filling Monoblock Alfatek 12/1 stands out as a significant innovation in the bottling industry. Offering unparalleled precision and efficiency, this article aims to detail its technical prowess and application in a professional setting. Design and Specifications At the heart of this monoblock, the ALFATEK 12/1 model features 12 self-leveling taps, ensuring uniform and accurate filling of bottles. Moreover, its stainless steel construction not only enhances durability but also ensures cleanliness. Furthermore, its compact size allows for efficient space utilization in various industrial setups. Advanced Filling Technology Kdsdovgt Txspfx Ai Rer Importantly, a key component in th Isobaric Filling Monoblock Alfatek is the degassing station, crucial for removing residual air and preserving the bottled product’s quality. Additionally, the monoblock’s technology includes a vacuum and gas injection station, which precisely controls the filling environment, optimizing the process for different liquid types. Versatility and Flexibility Regarding versatility, the machine’s single-head capper, equipped with an AROL head, accommodates both mushroom and straight cork caps. This feature is beneficial for bottling a wide range of products. Also, the Isobaric Filling Monoblock Alfatek can handle two bottle sizes, adding to its flexibility. Bottle entry is designed from the left, catering to various production line layouts. Safety and Maintenance In terms of safety, the design features comprehensive safety protections, ensuring secure operation and reducing accident risks. Additionally, the inclusion of a user, maintenance, and spare parts manual simplifies its upkeep. Consequently, regular maintenance ensures long-term reliability and efficiency. Performance and Reliability Having been operational until November 2022, the monoblock demonstrates not only consistent performance but also reliability. With a capacity of 1500 bottles per hour, it meets the demands of high-volume production lines. Indeed, its robust design and advanced technology make it a valuable asset in the bottling industry. Conclusion of the Isobaric Filling Monoblock Alfatek In conclusion, the Used Isobaric Filling Monoblock Alfatek 12/1 is more than just equipment; it’s a testament to advanced engineering in the bottling industry. Its blend of precision, versatility, and efficiency makes it an ideal choice for professional bottling operations, representing a wise investment for businesses aiming to enhance their bottling processes.