Used Cormak Bs-128Hdrc 230V for sale (3,608)

Condition: new, Year of construction: 2026, Vertical Bandsaw - Industrial Machine A proven industrial machine! Successfully sold throughout Europe. A heavy-duty, professional, easy-to-use bandsaw with a durable construction. It allows for precise setting of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quick removal of the blade. A precise cast iron machine table with a ground and polished surface. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Technical Data: Wheel diameter [mm]: 680 Maximum cutting height [mm]: 430 Maximum cutting width [mm]: 700 Worktable dimensions (L x W) [mm]: 790 x 500 Worktable tilt [°]: -5 - 45 Blade width [mm]: 19 - 40 Blade length [mm]: 5020 Belt speed [m/s]: 18 Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 Weight [kg]: 308 Motor power (S1/S6) [kW]: 4.0 / 5.6 Dust extraction ports [mm]: 2 x 100 Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs. Dodevugtnspfx Abfjuu

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation Duodpfx Aoyk Apnobfju The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Dsdpfx Abeyk Alijfouu Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Dujdpfsycqhcox Abfeu The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg Dusdpfsy En E Sjx Abfju MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight NETTO/ BRUTTO 220 kg / 284 KG Warranty 12 months Manual Dedpsvuf S Nofx Abfeuu yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: new, Year of construction: 2026, Professional belt grinder CORMAK BS 150-200 for rough grinding and polishing of metal. Suitable for various shapes and materials. The size of the sanding belt is 150x2000 mm and the powerful 3 kW motor make it universal in its applications. Characteristics of the BS150-200 belt sander CORMAK BS150-200 belt sander with extraction - excellent combination of performance and stability. Equipped with a solid and rigid steel base , it ensures reliable stability during operation. With one working speed, precision sanding becomes easier than ever before. Adjustable, stepless grinding angle with lock allows precise setting and maintaining the optimal position. The large grinding surface facilitates manipulation and grinding of various workpieces. Additionally, the belt sander is standardly equipped with an effective extraction system , eliminating dust and ensuring a clean and safe working environment. Good stability thanks to the strong and rigid steel base Two working speeds Adjustable grinding angle with lock The large grinding surface makes it easier to grind workpieces Equipped with extraction as standard Product parameters: Dimensions of the abrasive belt (L x W) [mm] 2000x150 Belt speed [m/s] 15/30 Engine speed [rpm] 1400/2800 Djdpfx Abevu Uqnofsuu Engine power [kW] 2.5/3.0 Weight [kg] 117 Dimensions (L x W x H) [mm] 1000x650x1150 Power supply [V] 400 Extraction motor power [kW] 0.37

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Djdemrnk Espfx Abfouu Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Dusdpfxeudi Uze Abfju Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS are characterized by high rigidity and maximum resolution precision, operating with full interpolation on each axis: X, Y, and Z. Digital Signal Processing (DSP) ensures digital signal processing for smooth machine operation and high machining accuracy. The plotter with a working area of 1220 × 1230 mm provides stable and precise performance. The controller’s built-in memory allows the machine to operate without the need to reload the program each time. The spindle design incorporates high-quality machine bearings, characterized by very quiet operation and increased durability. Training at the CORMAK headquarters is included with every machine. Technical specifications Spindle: 3.7 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 1200 × 1200 × 210 mm Control system: DSP Programming resolution: 0.001 mm Power supply: 400 V Weight: 450 kg Machine dimensions: 2000 × 1800 × 1640 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion (Z-axis – ball screw) Software: UCanCAM V13 software, Polish language version (optional) IMPORTANT! The machine is equipped with a G-code path memory (resume function). In the event of a failure or power outage, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200 × 1200) Standard equipment Leveling feet Bolts Wrenches Training cutter set Dusdpoycuycjfx Abfou ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Unloading and positioning of the machine are the customer’s responsibility. The power plug must be provided by the customer due to different socket types (16A / 32A). Optional equipment (net prices) UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available Duedoh Rfccepfx Abfou - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C Serial number: 1995MG27553, used, in good condition, 100% fully functional, scope of delivery as per photos Dedpfx Absy Npzpofouu

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C SN: BEDBB32950, used, as-new condition, 100% functional, scope of delivery as per photos. Duodoy Npzijpfx Abfsu

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C Serial number: BEGRS039604, used, in good condition, 100% fully functional, delivery as per photos Dedsy Npz Aepfx Abfjuu

Condition: ready for operation (used), Baldor BSC1105-24 servo drive, INPUT 3AC230V, ID/No: 20405C, SN: 1995MG27554, used, in good condition, fully functional, scope of delivery as shown in photos. Dedpfoy Npzvex Abfouu

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 1,400 kg, total length: 7,000 mm, total width: 2,400 mm, total height: 2,800 mm, wall thickness: 40 mm, machine/vehicle number: 16.8m² Bürocontainer Premium-Linie, External dimensions: 240/700 cm Height: 280 cm Walls: Sandwich panel Exterior cladding: Luxurious horizontal louvered cladding panel Ceiling: Galvanized LT sheet + insulation + PVC cladding Djdpoquqhdefx Abfjuu Floor: Hydrophobic plywood + laminate Windows and doors: Façade window + door – aluminium

Condition: new, Year of construction: 2025, NEW ❗❗❗ office container/residential container for sale/ In stock ❗❗❗ AVAILABLE External dimensions: 240x 600x 240H Description of standard version: • Insulation roof/wall PU- 40 mm • Sandwich panels - (standard RAL 7016/9002) • Frame color - (standard RAL 7016) • Floor - laminate • 1x 90x200 outer door • 2x windows (turn/tilt & fix) • LED lighting (inside/outside) • Electrical box with circuit breaker • 32 A power connection including sockets Dujdpfxjk E Hute Abfeu BS Containers have a high quality standard and are ISO 9001-2015 certified. The materials selected for the containers correspond to the specified EU standards. Our containers are particularly characterized by: High-quality materials Stable construction Premium insulation individual design Versatile uses The price is a net price. For companies with EU VAT ID no. no VAT will be charged (price equals take-away price). Office space: approx. 14 m²

Condition: new, Year of construction: 2025, NEU❗❗❗Burocontainer/Wohncontainer zu Verkaufen❗❗❗ SOFORT VERFÜGBAR Außenmaß: 240x 500x 260H Djdpshw Nlpjfx Abfjuu Beschreibung Standardausführung: • Dämmung Dach/Wand PU- 40 mm • Sandwichplatten -(RAL 7016) • Rahmenfarbe - (RAL 3000) • Boden - Laminat • 1x 90x200 • 2x 80x200 Fenster • 3x 90x200 Fenster • LED-Beleuchtung (innen/außen) • Stromkasten mit Schutzschalter • Stromanschluss 32 A inkl. Steckdosen BS Container haben einen hohen Qualitätsstandard und sind ISO 9001-2015 zertifiziert. Die ausgewählten Materialien der Container entsprechen den vorgegebenen EU-Normen. Unsere Container zeichnen sich besonders aus durch: Hochwertige Materialien Stabile Bauweise Erstklassige Isolierung Individuelle Gestaltung Vielseitige Einsatzmöglichkeiten Der Preis ist ein Nettopreis. Für Unternehmen mit EU USt-IdNr. wird keine MwSt. berechnet (Preis gleich Mitnahmepreis).

Condition: new, Year of construction: 2026, The Cormak VP3000 gluing press is a solid and efficient machine that is ideal for the production of furniture, stairs and other wooden elements. Its steel construction guarantees durability and stability, and easy adjustment and fast movement of the pressure unit ensure comfort and precision of work. High-performance, fully adjustable hydraulic cylinders Powerful hydraulic cylinders provide high pressure, necessary for gluing even thick and hard materials. Full adjustment of the cylinders allows for precise adjustment of the pressure force to the needs. Hydraulic valves allow for maintaining constant pressure Hydraulic valves maintain constant pressure during the entire gluing process, which ensures an even and durable connection of the glued elements. Constant pressure is a guarantee of work safety and avoidance of material damage. Duodpjwcy U Tsfx Abfou Hydraulic pressure indicator as standard The machine is equipped with a hydraulic pressure indicator that allows for ongoing monitoring of the pressure force, which makes it easier to control the gluing process. Thanks to the indicator, you can precisely set and maintain the appropriate pressure, which translates into high quality gluing. Solid steel construction The steel construction guarantees that the device will last for many years, even after intensive use. Solid materials ensure stability and safety when working with the device. Easy adjustment of the pressure unit Thanks to the easy adjustment, you can quickly and precisely adjust the pressure force to different materials. This translates into better work results and greater versatility of the device. The lock allows you to maintain a constant pressure The pressure lock allows you to lock the set pressure force, which is particularly useful for repetitive tasks. Technical parameters Total height 2040 mm Total width 3000 mm Max. clamping height 1550 mm Min. distance between pressure units 240 mm Distance of the hole from the pressure unit 50 mm Pressure 6 x 2000 kg Dimensions 3030x450x660 mm Total weight 260 kg

Condition: new, Year of construction: 2026, Pallet Truck with Electronic Scale – 2500 kg Capacity – Transport and Weighing in One Process Key Features Integrated electronic scale – allows weighing without the need to transfer goods to a separate stationary scale. Load capacity of 2500 kg – ideal for handling heavy pallets with construction materials, raw materials, and bulky loads. Weighing accuracy of ±0.5 kg – ensures precise weight measurement even during dynamic loading. Tare, totalizing, and piece counting functions – simplify daily operations and order picking. Ergonomic handle – designed for comfortable use throughout the workday. Durable steel construction – resistant to mechanical damage and suitable for heavy-duty industrial use. Polyurethane wheels – ensure smooth maneuvering and protect warehouse flooring. Construction and Technology The main structure of the truck is made of high-grade steel, providing long service life and stability under full load. The 1150 mm long and 170 mm wide forks enable safe handling and transport of most standard pallets. The 570 mm spacing between the forks ensures compatibility with commonly used industrial logistics systems. The truck features a built-in electronic scale with a 6-digit backlit display for clear reading even in low-light conditions. The entire system is housed in a rugged metal casing, which also contains the battery and charging unit. The scale meets Class III accuracy standards, making it suitable for professional and semi-commercial use. Precision and Operational Efficiency Thanks to high-sensitivity load cells and advanced control electronics, the user receives quick and accurate weight readings, even for unstable loads. Tare and totalizing functions provide added flexibility and control, especially during order picking, packaging, or inventory control. Additionally, the piece counting function speeds up operations involving small items. The hydraulic system ensures smooth lifting of loads, while the well-designed control lever reduces operator effort. The entire unit is optimized for heavy-duty use in industrial environments where reliability and accuracy are essential. Applications This model is ideal for: Warehouses and logistics centers – for fast transport and weighing during order fulfillment. Production plants – for checking the weight of raw materials and finished goods. Shipping and freight companies – to eliminate loading errors and streamline the preparation of transport documents. Construction material wholesalers – for weighing large pallets without additional equipment. Standard Equipment Electronic scale with ±0.5 kg accuracy, Class III Backlit LCD display (6 digits, large font) Tare, piece counting, and total weight functions Battery and charger included Steel forks: 1150 × 170 mm Deformation-resistant steel frame Polyurethane wheels – durable, quiet, and floor-safe Duedjw Rpdlopfx Abfou Technical Specifications Maximum load capacity: 2500 kg Fork spacing (outer): 570 mm Fork length: 1150 mm Fork width: 170 mm Overall dimensions (L × W × H): 1570 × 570 × 1205 mm Net weight: 89 kg

Condition: new, Year of construction: 2026, Compact Roller Conveyor CORMAK HRN50209 The CORMAK HRN50209 compact roller conveyor is a functional transport unit designed for efficient movement of flat-bottom loads in industrial, warehouse, and production environments. Thanks to adjustable length and height, a solid steel construction, and a load capacity of up to 200 kg, this model provides flexible adaptation to workstations and stable operation in many applications. It is an ideal solution for companies that need a simple, durable, and mobile internal transport system. The CORMAK HRN50209 roller conveyor improves material flow organization, reduces load handling time, and allows the transport layout to be quickly adapted to the current needs of the facility. Main Advantages Adjustable length: 820–2090 mm – easy adaptation to available space and conveyor line requirements. Height adjustment: 670–940 mm – enables setting an ergonomic working height. Load capacity up to 200 kg – safe transport of heavier boxes, crates, wooden elements, and other materials. Mobile design with lockable wheels – easy relocation and stable positioning during operation. Reinforcement braces between legs – increased rigidity and overall structural stability. Expandable modular configuration – possibility to connect several modules to create custom conveyor lines. Duedpfx Aeyuu Ansbfju Delivered fully assembled – quick implementation without time-consuming assembly. Construction and Technology Solid Steel Construction The FLOW roller conveyor is made of durable steel, providing high resistance to working loads and everyday use in industrial environments. The steel frame withstands intensive operation while ensuring stable guidance of transported materials. The conveyor uses steel rollers with a diameter of 50 mm, enabling smooth movement of goods without the need for a drive system. This solution works particularly well in environments where simplicity of operation, low failure rates, and flexible use in different areas of the facility are important. Adjustable Length and Height One of the key advantages of the CORMAK HRN50209 model is its wide adjustment range. The working length from 820 to 2090 mm allows the conveyor to be adapted to a specific workstation, while the height range of 670–940 mm facilitates integration with other equipment such as work tables, shelving systems, packing stations, or sections of a production line. Standard Equipment steel load-bearing frame 12 steel rollers length adjustment system height adjustment system 4 transport wheels wheel locking mechanism reinforcing braces between legs unit delivered fully assembled Technical Specifications Parameter Value Length range 820–2090 mm Width 510 mm Loading width 510 mm Roller diameter 50 mm Minimum height 670 mm Maximum height 940 mm Frame material Steel Wheel / roller material Steel Maximum load capacity 200 kg Weight 51.51 kg

Condition: new, Year of construction: 2026, Compact Roller Conveyor CORMAK HRN50130 The CORMAK HRN50130 compact roller conveyor is a mobile transport unit designed for efficient movement of loads with flat bottoms in warehouse, production, and logistics environments. Thanks to the adjustable length of 450–1300 mm, height adjustment of 670–940 mm, and a load capacity of up to 130 kg, the device can be precisely adapted to a workstation and the type of transported material. The CORMAK HRN50130 model was designed for facilities that require a durable and flexible solution for internal transport. It is a steel roller conveyor that improves material flow, enhances operator ergonomics, and allows quick configuration of transport layouts. Main advantages of the machine Adjustable length: 450–1300 mm – easy adaptation to available workspace and workstation layout. Adjustable height: 670–940 mm – allows setting the optimal working height. Load capacity up to 130 kg – safe transport of boxes, crates, wood, and other materials with flat bottoms. Steel rollers with a diameter of 50 mm – durable transport surface resistant to intensive use. Steel frame construction – high rigidity and resistance to working loads. 4 swivel wheels with brakes – easy relocation of the unit and stable positioning during operation. Reinforcement braces between the legs – additional rigidity and improved operational safety. Expandable modular configuration – possibility to connect multiple units to extend the conveyor system. Delivered fully assembled – quick start-up without time-consuming assembly. Construction and Technology Steel load-bearing structure for industrial use Duodsyuuy Hspfx Abfeu The CORMAK HRN50130 compact roller conveyor is made of durable steel, ensuring stable operation and resistance to daily use in industrial environments. The rigid frame provides reliable support for transported loads and minimizes the risk of deformation under working loads. The device is equipped with steel rollers with a diameter of 50 mm, enabling smooth movement of goods along the conveyor. Adjustable length and height The length adjustment range of 450–1300 mm allows the conveyor to be adapted to spatial conditions and the layout of the transport process. The height adjustment range of 670–940 mm allows the unit to be set at an ergonomic working level for the operator and integrated with other equipment such as work tables, picking stations, shelving systems, or sections of conveyor lines. Standard Equipment steel load-bearing frame 9 non-powered steel rollers length adjustment system height adjustment system 4 transport wheels wheel locking mechanism reinforcing braces between legs unit delivered fully assembled Technical Specifications Parameter Value Length range 450–1300 mm Width 510 mm Loading width 510 mm Roller diameter 50 mm Minimum height 670 mm Maximum height 940 mm Frame material Steel Wheel / roller material Steel Load capacity 130 kg Weight 35.06 kg

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Dusdpfsxy Hrqsx Abfju Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm

Condition: new, Year of construction: 2026, SP3000SUPER Pallet Truck with Scale The SP3000SUPER pallet truck with scale is a robust and practical weighing pallet truck designed for transporting, lifting, and weighing loads directly during operation. It is ideal wherever fast pallet handling, load weight control, and efficient material flow are essential in warehouses, manufacturing facilities, logistics centers, wholesale operations, and loading areas. The SP3000SUPER features standard forks designed for Euro pallets, making it a convenient choice for everyday handling of EUR pallets. The truck allows operators to quickly pick up pallets, transport goods, and weigh loads simultaneously without the need for a separate floor scale. This solution is designed for companies looking to speed up goods receiving, order picking, shipment verification, and internal transportation processes. The electronic weighing pallet truck helps reduce additional handling operations, minimize errors, and improve control over the weight of transported goods. Key Advantages of the SP3000SUPER Pallet Truck Integrated electronic scale – instant load weight readings without the need for a separate stationary scale. Standard Euro pallet forks – ideal for handling EUR pallets in warehouses, wholesale facilities, production plants, and logistics centers. 3,000 kg load capacity – suitable for heavy loads, palletized goods, materials, and production components. 1,150 mm fork length – universal dimensions for handling standard Euro pallets. Lifting range of 80–190 mm – convenient lifting, transporting, and positioning of pallets. Polyurethane wheels – smooth and quiet operation with excellent wear resistance during daily use. Heavy-duty construction – stable frame designed for intensive warehouse applications. Easy maneuverability – performs efficiently in warehouse aisles, near racking systems, loading docks, and order-picking stations. Transporting, Lifting, and Weighing in One Device Djdpoychbtjfx Abfsuu The SP3000SUPER weighing pallet truck combines the functionality of a conventional pallet truck with an integrated weighing system. Operators can approach a pallet, lift it, transport it, and instantly verify the weight of the load. This is particularly beneficial in environments where accurate weight information is required for documentation, shipping, receiving inspections, or inventory management. Thanks to the built-in scale, the truck significantly reduces handling time. There is no need to move pallets to a separate weighing station, which streamlines receiving operations, goods inspection, order picking, and shipment preparation. This is especially valuable in high-turnover warehouses, logistics hubs, and e-commerce fulfillment centers. The electronic weighing pallet truck provides better control over material flow, reduces the risk of errors, and enables faster response to weight discrepancies. It is a practical solution for daily operations where efficiency, accuracy, and ergonomic pallet handling are priorities. Standard Euro Pallet Forks The SP3000SUPER is equipped with forks specifically designed for handling Euro pallets. Technical Specifications Parameter Value Fork Outside Width 560 mm Single Fork Width 160 mm Fork Length 1,150 mm Lifting Range 80–190 mm Overall Dimensions 1,600 × 560 × 1,230 mm Wheels Ø180 × 50 mm / Ø80 × 70 mm, polyurethane Net Weight 102 kg

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Dedpfxevugf Ro Abfeuu Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg