Used Dreher 4265 for sale (49)

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Crodpfxjycnf So Ad Neb Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm Codpfx Asd Nttnod Nerb - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Crjdpfx Ajuqc Hrjd Nob Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Csdpfsuqfa Ijx Ad Njrb Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. Credpfx Ajgphqced Njb For plastic processing pipes, profiles, injection molding

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Power: 4 kW Crodpfx Adevzzx Ej Njb All functions tested and fully operational!

Condition: used, Year of construction: 1995, sheet width 300 mm coil weight 1,5 t Csdpfx Aer Hginsd Norb coil internal dia. 400 - 500 mm je Arm 670 mm total power requirement kW weight of the machine ca. 760 kg dimensions of the machine ca. T 1,23 x B 1,7 x H 1,1 m

Condition: used, Year of construction: 1977, material width:300 mm no. of straightening rolls:13+2+2 straightening roll diameter:60 mm Crjdpscxxn Ijfx Ad Nsb

Condition: used, material width:304,8 mm material thickness:0,12 - 2,2 mm feed length:304,8 mm clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N Credpecxxrxjfx Ad Njb feeding force:650 N weight of the machine ca.:0,15 t dimensions of the machine ca.:0,7 x 1,05 x 0,6 m

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 Crsdpecxxx Rofx Ad Nob sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Operating hours: 6,650 h, condition: good (used), machine/vehicle number: Delta 34/41, Please refer to the pictures and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for use. The purchase price includes VAT. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust. Indent. No. Subject to prior sale. Crsdpotudxdofx Ad Nob Visit our website and take a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Crjdoullzhopfx Ad Njb Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Crodpfx Aoyk Ea Asd Njb

Condition: new, Heidenhain ROD 426 5000 27S12-03 rotary encoder. 376 846-L1 serial number 74559410B - unused! - Crjdsy Nqqxjpfx Ad Njb

Condition: new, Year of construction: 2025, curl forming machine 2,05m New! Direct from the manufacturer! Width: 2050 mm Credpfx Ajcg Tn Nsd Neb Max. Sheet thickness: 0.65 mm for Rm 400 MPa Shaft diameter: 16 mm Pipe diameter 31.8 / 3.6 Weight: 15 kg We are looking forward to your contact!

Condition: ready for operation (used), Siemens 1FT6044-4AK71-4EG5 synchronous servo motor SN:YFD6642654601001, the motor was overhauled at Siemens, used, in good condition, 100% functional, scope of delivery as per photos Crjdpfsugckbjx Ad Nsb

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg Codpfx Aeumpd Ajd Njrb OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; PORTABLE HANDWHEEL ; LINEAR SCALES ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Codpfoy Hq Npox Ad Njrb Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Machine weight kg 13500

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Credpfx Adsvuukus Nsb Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Crodpfextff Asx Ad Njb

Condition: used, Year of construction: 1990, Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Cedpeuqdhksfx Ad Nerb Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min Standard configuration DREHER - Model WAV-MD-25, YOM 2000Electronic universal roller feedSheet width max. 510 mm Sheet thickness max. 6.5 mm Number of feed rollers 2 Diameter of feed rollers 125 mm Feed speed 137 m / min Feed length 0 - 9999.99 mm Feed accuracy +/- 0.05 Drive power 5.5 kW

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm Codefn Apzjpfx Ad Njrb clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Condition: good (used), Year of construction: 1996, Offer 25468 Sheet – Profiling Line for Shelf Panels Technical Data: - Shelf panel width approx. 250 mm - Material thickness 1.25 mm - Profiling unit with 16 roll forming stations - Hydraulic punching unit - Straightening unit, make DREHER - Motorized decoiler CAMU, load capacity approx. 1.5 t - Control panel - Space requirement / footprint: 14 x 1.5 m Credpoxxvq Tsfx Ad Nob - Weight approx. 10 t

Year of construction: 2023, condition: new, Control with motor for all old NC feeds. Substitute for Alba, Schleicher, Dreher, PA, Torque 6-90 Nm Complete price from 3,900.00 for Alba stepper motors Credpfxocn Du Ij Ad Njb from 5,900.00 for servo drives. To be installed by any home electrician.