Used Dryer 6.00 M³/Min for sale (77,949)

Condition: excellent (used), Year of construction: 2020, Screw compressor, compressor, compressed air unit, compressed air dryer, refrigerated dryer, dryer, compressed air refrigerated dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 - Flow rate: 520 l/min Lasdpfsxl Rxfex Akyoa -Motor power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Year of manufacture: 2020 -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm Total weight: 180 kg

Condition: good (used), functionality: fully functional, Year of construction: 2025, As-new squared timber (softwood) available from late 2025. Stock: 120 squared timbers; packed and secured on EU pallets, 35/36 pieces per bundle. Lasdpsy Amwhofx Akyoa Sold/given only in full bundle sizes.

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Lasdpfx Aksygvnieyoa

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track Laodpjywu Azofx Akyea -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt, belt conveyor -Speed: 6 m/min -Conveyor belt width: 130 mm Ljdpoyvy Dbofx Akyeaa -Conveyor belt length: 1020 mm -Motor/Transmission: 0.18 kW -Dimensions: 1020/335/H285 mm -Weight: 19 kg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine Ljdpfjyvrnxjx Akyoaa -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm Lodjttc Tkspfx Akyeaa -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Feldpausch, conveyor belt, transport belt, belt conveyor, height-adjustable -Speed: 15 m/min -Belt width: 250 mm -Conveyor length: 2060 mm -Height: max. 920 mm -Drive: Engel 0.06 kW, see photo of nameplate -Transport dimensions: 2060/530/H810 mm Lasdpfx Aeyk T Dcskyja -Weight: 70 kg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min Laodsyia Enjpfx Akyja -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-140/M with servo motor -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Belt width: 110 mm Lsdpfx Akoyiay Eoyjaa -Conveyor length: 1290 mm -Transport dimensions: 1310/390/H160 mm -Weight: 15.2 kg

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Lasdpfxsv T Aqys Akysa Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: like new (used), Binder M 115 laboratory dryer – ex demo model from 2024 We offer a Binder M 115 laboratory dryer in ex demo condition, manufactured in 2024. The device was used only for demonstration purposes – it is fully functional, tested by the manufacturer and practically like new. The M 115 model is a precise laboratory dryer with forced air circulation, designed for fast and even drying and heat treatment of samples. Thanks to the possibility of programming work cycles, the device works well both in standard applications and in processes requiring repeatability and control of thermal conditions. Key parameters: • Year of manufacture: 2024 • Technical condition: ex demo – like new • Chamber capacity: 115 liters • Temperature range: from +10°C above ambient temperature to +300°C • Air circulation: forced (with fan) – fast and even temperature distribution Ledpjwp Hm Nofx Akyjaa • Controller with programming: possibility of setting cycles in real time or interval • Temperature protection: class 2 according to DIN 12880 • USB / Ethernet interface (depending on the version) for data logging Dimensions: • Interior (W × H × D): approx. 550 × 480 × 400 mm • External dimensions: approx. 710 × 790 × 605 mm • Power supply: 230 V, 50/60 Hz The device is ready for immediate use. Upon request, we will send photos, a test video and a price offer.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Lasdpomt Dcxjfx Akyea Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Lsdpfx Akemt Dcqsyoaa Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Lajdpfxsmt Dbhj Akyoa Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. Laedpfemt Dcfjx Akyoa 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Laedpov Er Ufjfx Akysa Feed speed 8-60m/min

Condition: good (used), Year of construction: 2022, operating hours: 9,800 h, RENNER RS 75 - 10 bar oil-injected screw compressor Lsdpfx Asygmhmokyoaa The compressor is in good condition with 9800 operating hours. Pressure: 10 bar Rated power: 75 kW Delivery rate: 10.35 m³/min Sound level: 76 dB(A) Air outlet: 2" Dimensions (L x W x H): 1754 x 1104 x 1697 mm Weight: 1367 kg Visit our store. We always have a large selection of new and used compressors in stock.

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder Ljdpfxjn Slk Ue Akyeaa - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: Lodpjrfyrpofx Akyoaa length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Year of construction: 2018, condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Cylinder diameter: 120 mm Flat width: 20 x 35 mm Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Laodpfxema Rtao Akyea Nominal speed: 0.4 m/s Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg

Year of construction: 2012, condition: like new (used), CONTEC-KOMPRESORYCONTEC-KOMPRESORY BLOCKERDS DW17,2012 PRODUCTION YEAR,2012 EFFICIENCY 2,8M3/MIN. FULLY RIGHT.NET PRICE 3100,- GROSS PRICE 3813,- I HAVE MORE REFRIGERATION DEHUMIDIFIERS, SCREW COMPRESSORS AND WELDING EQUIPMENT ON SALE.MORE INFORMATION TEL. 603 244 888, 726 244 888.CONTEC-COMPRESSORS Laodpfx Aed Syxtjkysa

Condition: good (used), Year of construction: 2007, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: SFB, belt conveyor type ITF /NP 2-lane on a solid stainless steel base -Speed: 52.8m/min -Operating Voltage: 267V -Drive: 3/2.6 Nm, see photo type plate -Belt width: 70 mm each -Conveyor length: 530mm / 820mm -Conveyor width: 220 mm -Set-up dimensions: 1360/370/H700 mm Laodpfjkahkrjx Akyea -Weight: 56 kg

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm Lasdovw Radjpfx Akyea -Total weight: 19.6 kg

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor Lasdpfxovpd Hus Akyea -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg