Used Endress+Hauser Silometer Fmc 320 922496-0500 for sale (4,074)

Condition: used,

Condition: new, Year of construction: 2024, Endress+Hauser level meter FTM50 new Level switch for fine-grained or powdery bulk solids. Process connections: Threaded, flanged and hygienic process connections (Tri-Clamp) Temperature: -50 to +280 °C Pressure: -1 to +25 bar Sensor length: 145 mm, 200 mm Klodpfx Ahor E Uf Ss Aow Sensor material: 316L (3.2 µm, 0.8 µm, PTFE coated, ETFE coated) International explosion protection certificates 4 pieces available

Condition: new, Characteristic Cable probe for hydrostatic level measurement, Kedpfxeh Rumbo Ah Aslw with ceramic cell Diameter = 22mm: General applications, Drinking water Diameter = 42mm: Wastewater applications Diameter = 29mm: Salt water applications

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-100200 Compax 0500-M -Number: 3x servo module available -Price per piece -Dimensions: 450/80/H350 mm Klsdpfx Ajn H Et Rjh Aow -Weight: 6.8 kg/pc.

Condition: ready for operation (used), Hauser Parker 0015 Compax 0500M servo drive module, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Klodpfx Asi Eadbsh Aow

Condition: excellent (used), ENDRESS ESE 20 YW-B Diesel Generator Set, 19.9 kVA Manufacturer: ENDRESS Elektrogerätebau GmbH Type: ESE 20 YW-B Machine Type: Diesel Generator Set / Emergency Power Generator Maximum Power Output: 19.9 kVA / 15.9 kW Operating Hours: approx. 5.87 h For sale is a used, soundproof ENDRESS ESE 20 YW-B diesel generator set with a water-cooled Yanmar four-cylinder engine. The unit is suitable for mobile power supply, as an emergency power solution, and for construction sites, workshops, agriculture, commerce, and industrial applications. Technical Data: Model: ESE 20 YW-B Design: Soundproof diesel generator set Maximum Power (LTP): 19.9 kVA / 15.9 kW Continuous Power (PRP): 17.6 kVA / 14.1 kW Rated Voltage: 400 / 230 V Kjdpfx Ahjznh Uvo Ajlw Frequency: 50 Hz Rated Current, Three-Phase: 25.4 A Power Factor: cos φ 0.8 Voltage Regulation: electronic Generator: Manufacturer: Mecc Alte Model: ECP28-1L Generator Type: Synchronous Generator Protection Class: IP23 Insulation Class: H Voltage Regulation: electronic Engine: Manufacturer: Yanmar Engine Model: 4TNV88-BGPGE Design: Water-cooled, 4-cylinder diesel engine Displacement: 2,190 cm³ Engine Power PRP: 17.3 kW Engine Power LTP: 18.2 kW Emission Level: Stage IIIA Speed: 1,500 rpm Speed Control: mechanical Fuel: Diesel Starting System: Electric start Onboard Voltage: 12 V Battery Capacity: 70 Ah Tank, Runtime and Noise Level: Tank Capacity: 51 liters Runtime at 75% Load: approx. 13.4 hours Sound Power Level LWA: 93 dB(A) Sound Pressure Level at 7 m Distance: 68 dB(A) Connections: 1 × CEE 400 V / 32 A 1 × CEE 400 V / 16 A 2 × CEE 230 V / 16 A 1 × 230 V / 16 A protective contact socket Equipment: Soundproof metal housing Yanmar diesel engine Electronic voltage regulation Analog voltmeter Analog ammeter Operating hour counter MC-01 engine protection controller Monitoring of speed, temperature, fuel, oil pressure, and alternator Circuit breaker Emergency stop switch Key switch for Off, On, and Start Fuel level indicator Starter battery Key available Areas of Application: Construction sites Emergency power supply Workshops Agriculture Industry and commerce Mobile power supply Power supply for electrical machines and equipment Transport Data: Dimensions (L × W × H): approx. 1,646 × 885 × 1,061 mm Weight: approx. 520 kg Condition: Used Operating hour counter shows approx. 5.87 hours. Optical condition according to the pictures. Normal age-related signs of wear. Scope of Supply: ENDRESS ESE 20 YW-B diesel generator set Starter battery Key Accessories as shown in the pictures Shipping via freight forwarder possible upon agreement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge Kodpfxeznca Hj Ah Ajlw with control

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table length: 550 mm, table width: 320 mm, table load: 400 kg, spindle mount: MK 2, total height: 1,750 mm, drill spindle length: 130 mm, total length: 1,400 mm, total width: 1,400 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 3,000 rpm, distance between stands: 600 mm, quill travel distance: 130 mm, quill stroke: 130 mm, space requirement width: 2,100 mm, spindle motor power: 550 W, workpiece weight (max.): 400 kg, overall weight: 1,600 kg, number of previous owners: 2, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 – Unique piece / excellent condition! (Bienne/Biel, Switzerland) This quality will never be produced again! Coordinate drilling machine / precision boring machine with tool kit (see photos) in excellent, exceptional condition, second-hand (owned for 41 years). The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious need to manually adjust the individual coordinates over longer distances using hand cranks. Furthermore, it features rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which can and must be switched on separately before starting work to maintain high accuracy and dimensions. This explains the factory-specified high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is particularly unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with a resolution of 1 My, also for the quill feed. This is a significant advantage when precisely drilling and milling at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly likely that you will not find another one like it. Those familiar with these machines, which are primarily used in the watch industry, firearms manufacturing / defense industry, precision engineering, material testing, and the optical industry, know the value of these masterpieces of mechanical engineering. It is also ideally suited for engine construction/overhaul, technical universities and training, materials engineering, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Kljdpsy Sx Nhefx Ah Aow Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle carriage: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3 x 380 Volts, spindle motor 0.80 HP Machine dimensions: Length = 1200 mm, Width = 1150 mm, Height = 1650 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net for export within the EU!

Condition: used, functionality: unexamined, Hauser 3SM-DR jig grinding machine with a lot of accessories (photos) Klodpey E Nilofx Ah Asw

Condition: ready for operation (used), Can diameter range: 52 mm – 108 mm Can height range: 51 mm – 180 mm Kledpjyyq Npofx Ah Ajw Capacity: up to 60 – 250 cans per minute Heads: 4 Driven lifters

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Kljdpfezmx N Ujx Ah Asw Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Kodpfx Aox Av Adoh Aolw

Condition: like new (used), Year of construction: 2008, operating hours: 150 h, functionality: fully functional, overall weight: 50 kg, fuel type: gasoline, tank capacity: 15 l, color: blue, power: 2.8 kW (3.81 HP), output current: 10 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 2.5 kW (3.40 HP), motor manufacturer: Honda, type of cooling: air, Professional 230 V petrol generator with AVR voltage regulation, delivering 2.5 kW (10.9 A) continuous and 3.0 kW (13 A) maximum output. Powered by a reliable 4-stroke OHV engine with recoil start. Fully serviced, starts easily and runs perfectly. Ideal for construction sites, workshops, emergency backup power and outdoor use. Made in Germany. Ready to work. Kledpfjzl D Elex Ah Aow

Condition: good (used), Coordinate grinding machine HAUSER 3 SM-DR, No. 239 (model no. 1329/2389), spindle speeds 5 - 80,000 rpm, XYZ control system HEIDENHAIN. Kedpfxjzlpt Ie Ah Aslw

Condition: good (used), Speed head up to 30.000 rpm Klodjzk U Stepfx Ah Aew

Condition: used, Year of construction: 1981, x-travel 650 mm Kodpot Hw S Usfx Ah Aelw y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Klsdpfxjt Hw Txs Ah Aow Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA Kljdpfxjt Hxcns Ah Asw total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Klodoyywb Sjpfx Ah Aow Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe outer diameter: mm -Stroke: 242 mm -Total length when retracted: 470 mm -Hole diameter: Ø 25 mm -Ideal for building a hydraulic press -Quantity: 6 available Klodpfsb A Iftox Ah Aew -Price: per piece -Weight: 7.5 kg/piece

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier Kledpjn Nbmtefx Ah Aow -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe outer diameter: mm -Stroke: 186 mm -Total length when retracted: 535 mm -Hole diameter: Ø 30 mm -Ideal for building a hydraulic press Kodpfx Aob A Rt Ijh Aslw -Quantity: 3 available -Price: per piece -Weight: 10 kg/piece

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply Kjdpen Nbm Esfx Ah Aolw -Manufacturer: Hauser, Servo Drive basic device -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm Kledpfx Ahefbh Age Aew -Price: per piece -Number: 3 pieces -Dimensions: 197/48/H48 mm -Weight: 0.75 kg/piece

Condition: used, Year of construction: 2020, Coordinate grinding machine Hauser 3 SM, year of manufacture 1996 Surface grinding machine Okamoto, year of manufacture 1996 Ksdpfxezc Eihs Ah Aslw Cylindrical grinding machine Weiss W11, year of manufacture 2009